Fitzmill, Model DKAS012, compact, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 14" long x 14" wide x 8" deep stainless steel product feed hopper (2) 3" OD stainless steel vari speed metering feed screws to enclosed process chamber with (32) fixed stainless steel knife / impact blades and 7½" ID and 8" OD diameter product discharge port with 31" ground clearance. Mounted on stainless steel frame.
OAD: 61"L x 58"W x 61"H
Pfm, Model Falcon, 2-up, automatic, servo driven, horizontal flow wrapper with number of product – dependent on materials, application, machine configuration and operator dexterity. Product size range: 1.6" to 23" in Length; ½" to 12" in Width; up to 6" in Height standard. Equipped with 96" product load area with 1½" high quick change lugs, no product / no pouch, adjustable forming box, 9.8" wide x 1" thick seal jaws and (3) sets of fin seal wheels, interlock safety guarding and 36" long powered discharge conveyor. Film specifications up to 23.6" reel width; up to 13.7" reel OD; on 3" OD core. Has (2) film rolls. Control panel has PLC controls with touch screen HMI. Mounted on base frame with leveling legs.
OAD: 270"L x 60"W x 90"H
Cornell, Model D-8, Variable speed "Versator". Rated from ½ to 2 gallons per minute and disc rotation from 2000 to 6000 rpm – depending on materials and application. Equipped with 6" diameter disc and has ¾" ID / 1" OD Tri-Clamp product in / outlet, top vacuum port, and bottom drain. Product flows through a film-forming ring out and over the surface of the rotating disc at which time the dispersion / deaeration action occurs. Control panel has mixer and vacuum controls with e-stop. Mounted on stainless steel frame.
Commonly used for dispersion, and deaeration for food, cosmetic, pharmaceutical and chemical applications. Includes 316 stainless steel contact parts, quick release cover.
OAD: 36" L x 30" W x 72" H
FEC, Model X-Force, stainless steel vibratory feeder. Equipped with 21" wide x 144" long stainless steel bed with 5" side walls, stainless steel dust cover, 12" diameter top center charging port and (2) 8" diameter discharges on each end.
OAD: 216"L x 29"W x 30"H
FEC, Model X-Force, stainless steel vibratory feeder. Equipped with 21" wide x 144" long stainless steel bed with 5" side walls, stainless steel dust cover, 12" diameter top center charging port and (2) 8" diameter discharges on each end.
OAD: 216"L x 29"W x 30"H
Bandrite Model 6000 RTL, Automatic, continuous motion, band style bag sealer rated from 250 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled, tilt away sealing head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600°F, bag trim station, 1 line coder and hand crank height adjustable for different size bags. Mounted over 6" wide x 100" long stainless steel conveyor with variable speed controller powered by ¼ Hp drive.
OAD: 108" L x 36" W x 59" H
FBF Italia, Model 2.50 Lab, two stage, homogenizer. Rated output capacity of 50 liters per hour – depending on materials, application and machine configuration. Maximum operating pressure up to 8700 psi. Equipped with manual homogenizing valve actuator assembly with 3¼" diameter x 12" deep pressurized hopper, ¼" OD discharge port and digital pressure gage.
OAD: 32"L x 18"W x 30"H
Lee, Model 20LD12T, 20 liter (5.28 gallon) 316 stainless steel jacketed kettle. Vessel Dimensions: 16¾" ID x 15" deep. Equipped with a tilt out bridge mounted triple motion agitator. Scrape powered by a 5 Hp drive, cross bar powered by a 2 Hp drive, high shear agitator powered by a 3 hp drive, flush mounted sensor and 2" OD / 1½"ID tri-clamp style discharge with ball valve and 36" ground clearance.
Jacket Fittings: ¾" NPT
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 93"L x 43"W x 120"H
Pack West, Model Centurion 200 torquer with waterfall style cap elevator / sorter / feeder. Rated from 25 to 300 caps per minute – depending on materials, application and machine configuration. Cap sizes from 28mm to 135mm. Equipped with a 30" wide x 33" long x 36" deep cap hopper, 11" wide live bottom watterfall conveyor with ¾" high cleats set on 6" centers, adjustable cap chute, 4½" wide x 128" long container conveyor with bump wheel indexing, 1" wide x 24" long single side belt container gripper, (4) sets of spindle-driven quills with (3) sets of air clutch. Control panel with touch screen HMI. Mounted on a stainless steel frame.
OAD: 60"L x 60"W x 102"H (Feeder / Sorter)
132"L x 40"W x 90"H (Capper)
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, dual air blast reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, dual air blast reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, dual air blast reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
