Equipment

Product

Kalish Feeder Incline/Cleated 5650

Kalish, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 10" wide x 75" long cleated cap conveyor belt with ¼" high cleats on 4½" centers, 25" long x 24" wide x 15" deep stainless steel bulk product hopper, 20" long discharge chute with 54" discharge height.

OAD: 44"L x 42"W x 80"H

MGS Feeder Outserter RPP4210

MGS, Model RPP-4210, high speed (4) head rotary, pick and place coupon feeder. rated from 40 to 600 cycles per minute – depending on materials and application. Product size range: 1" to 7" in Width; 1" to 4" in Height and .06" to .75" thick with (4) heads. Equipped with (4) head rotary vacuum suction cup pick n place. Control panel has glue and vacuum on / off, fault reset, main drive on and e-stop push button controls, Mounted on "H" style base frame with safety guarding, leveling legs and statis light bar.

OAD: 40"L x 48"W x 76"H

Kalish Feeder Incline/Cleated 5650

Kalish, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 10" wide x 75" long cleated cap conveyor belt with ¼" high cleats on 4½" centers, 25" long x 24" wide x 15" deep stainless steel bulk product hopper, 20" long discharge chute with 54" discharge height.

OAD: 44"L x 42"W x 80"H

Zalkin Capper 8 Head of More CA8360NG

Zalkin, stainless steel, 8 head rotary chuck capper and feeder. Rated from 24 to 240 containers per minute – depending on materials, application and machine configuration. Equipped with 28" diameter bowl sorter and feeder, 3½" wide plastic delrin belt conveyor, worm screw to star wheel in feed, (8) head chucks set on 5½" centers and star wheel discharge. Control panel has A/B controller and A/B touch screen HMI. Mounted on heavy duty frames.

OAD: 105"L x 60"W x 90"H

Osgood Filler Cup Inline 3600E

Osgood, Model 3600-E, 3 lane, in line, stainless steel, cup filler, heat sealer and over lid applicator rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Currently set for (3) up pattern with 4-1/4" OD cup pockets set on 5½” centers. Equipped with (3) lane cup denster, stainless steel product hopper, (3) servo driven piston filler with 4" ID x 6½" long pistons with positive cut off nozzels, roll stock film and heat sealing stations with knife assemblies, 48" long (3) lane powered roller lid magazine and snap on over lid section. Control panel has A/B CPU controller with touch screen HMI controls with start, stop, e-stop push button and statis light. Mounted on heavy duty stainless steel frame.
Change parts required to accommodate size range.

OAD: 175"L x 45"W x 75"H

Krones Labeler Glue Wrap ROTINA I

Krones, Model Rotina I, Automatic, inline, cold glue spot or wrap labeler rated from 25 to 100 containers per minute – depending on materials, application and machines configuration. Container size range: 2” to 6-1/2"’ in Diameter; Minimum of 3-1/2" and upon request maximum in Height. Label size range: 2-1/2” to 14” in Length; 1/4 to 6" in Height Equipped with 108" long x 4¼" wide stainless steel conveyor, worm screw in feed, pre-cut sheet stock label magazine, 6½" high glue wheel system with cold glue pump and 26" long x 4" high wrap station. Control panel has push button controls with e-stop. Mounted on base frame with height adjustable legs. Change parts required to accommodate different size ranges.

OAD: 108" L x 38" W x 45" H

Tank Processors 500 GAL

Three chamber, 304 stainless steel insulated, 500 gallon flavor tank. Each chamber is 170 gallons with inner dimension of 36" x 28" x 40" Deep. Equipped with lift up cover, prop agitation powered by a ½ hp drive and CIP spray ball supplied by a 2½"OD / 2"ID Tri-Clamp fitting. Slant bottom has 2" OD / 1½"ID Tri-Clamp side bottom discharge with 22" floor clearance. Mounted on stainless steel legs.
Rectangle construction provides maximum capacity in small floor area.

Top Access (Each Tank)
(2) 2½"OD / 2"ID Tri-Clamp

OAD: 94"L x 50"W x 85"H

MRM Elgin Filler Liquid Pos Disp RPF-8

MRM Elgin, Model RPF-8, Automatic, 8-hd left to right, rotary piston filler rated from 30 to 150 containers per minute – depending on materials and application. Fill range: up to 35oz with accuracies + / – 1/4 of 1% depending on product. Maximum container size: up to 6" in Diameter; up to 12" in Height. Equipped with 3¼" wide conveyor, worm screw to star wheel in feed, 13½" diameter x 22" deep (14 gallon) stainless steel reservoir with level detector, 7" x 6" container pedestals, (8) (4" ID x 7-1/2") pistons, with 5/8" OD nozzles set on 8" centers, drip trough, no container / no fill, E-stop and safety guarding. Mounted on stainless steel frame.

OAD: 128"L x 54"W x 80"H

Conveyor Belt 18"W X 190"L

Inclined stainless steel conveyor. Equipped with a 15" infeed height, 18" wide x 190" long trough style food grade belt, 25" discharge height. Mounted on a (2) leg stainless steel base frame with casters.

OAD: 190"L x 32"W x 26"H

Conveyor Belt 18"W X 153"L

Inclined stainless steel conveyor. Equipped with a 8½" infeed height, 18" wide x 153" long trough style food grade belt, 56" discharge height. Mounted on a (2) leg stainless steel base frame with casters.

OAD: 155"L x 32"W x 56"H

Lee Tank SS JKT 55DP

Lee, Model 55 DP, 55 gallon total capacity, 316 stainless steel jacketed mixing tank with gallons of product per hour – depending on materials and application. Vessel dimensions: 20" ID x 40" deep straight wall. Equipped with flat top with clamp down cover and bracket for mixer, side and bottom jacket. Dish bottom has 2" OD / 1½"ID Tri-Clamp style discharge with 18" ground clearance. Mounted on (4) stainless steel legs with locking casters.

Nat’l Brd: 11708
MAWP: 100 psi @ 338°F
MDMT of -20°F @ 100 psi.

Jacket Ports:
(2) ¾" NPT

OAD: 38"L x 38"W x 67"H

Lee Kettle Triple Motion 50U7S

Lee Model 50U7S, 316 stainless steel, 50 gallon, full jacketed, Internal vacuum rated, triple motion kettle with gallons of product per hour – depending on materials and application. Equipped with bolt down top cover with (1) center top mounted anchor style agitator and (1) off center top mounted turbine agitator and (1) off center top mounted prop agitator with full side and bottom jacket. Dish bottom has 6" OD sanitary center bottom discharge with 60" floor clearance. Mounted on (3) stainless steel legs.

Vessel Dimensions: 38" OD; 28" Deep

Jacket rated: MAWP 100psi @ 338°F; MDMT of -20°F @ 100psi.

Internal full vacuum rated

Top Ports:
(5) 2" OD Sanitary Ports
(2) 3" OD Sanitary Ports
(1) 8" OD Sanitary Manway

Bottom Port:
(1) 6" OD Sanitary Discharge Port

Jacket Ports:
(2) 1-1/2" OD Threaded Side Ports
(2) 1-1/2" OD Threaded Bottom Ports

National Board: # 9798

OAD: 38" L x 38" W x 120" H