5J8480 Airgas, model TL-2048, stainless steel, inline, liquid nitrogen freeze tunnel with pound of product per hour – depending on materials, application, and machine set-up. Equipped with 4½” high x 48″ wide product aperture, 50″ wide (48″ usable) x 315″ long stainless steel wire mesh belt, belt powered by a 1 Hp drive, 42″ infeed / discharge height, (8) top mounted fans powered by (8) 1 Hp drives. Control panel with touch pad HMI and AB PLC. Mounted on stainless steel frame with (12) legs with leveling feet.
OAD: 326″ L x 111″ W x 103″ H
5J8510 Quadro, model SDx, 316 stainless steel, variable speed, sifter with pounds of product per hour – depending on materials, application, and machine setup. Equipped with Quadro S20x Flexsift sifting head, 15″ diameter x 6″ deep product hopper with a 54″ infeed height, 8″ diameter x 4″ deep sifting chamber, 11″ diameter discharge with 33″ ground clearance, machine powered by a 7½ Hp drive. Control panel with PLC and touchscreen HMI. Mounted on stainless steel frame with (4) casters.
Machine is equipped with SMARTdetect, in which it automatically detects when a different milling / sifting head is put on the machine and adjusts the speed automatically through the VFD.
OAD: 77″ L x 36″ W x 54″ H
5J8345 Bizerba, model CWP MAXX, stainless steel, dual lane checkweigher with number of packages per hour – depending on materials and application. Capable of handling packages up to 5.9″ in length and 7.8″ in width and from 5 to 3000 grams. Equipped with (2) 8″ wide x 41″ long belts, infeed/discharge height range of 39.5″ to 51.2″, 17″ long x 7.5″ wide load cell. Control panel with proprietary PLC and touchscreen HMI. Mounted on stainless steel frame with (4) leveling legs.
OAD: 58″ L x 46″ W x 76″ H
5J8340 10″ wide x 192″ long, white belt, variable speed, stainless steel, tabletop conveyor. Equipped with 10″ wide x 192″ long belt, 24″ to 30″ infeed / discharge height range, 16″ wide x 194″ long drip tray, powered by a center mounted 1 Hp drive. Mounted on stainless steel frame with (6) legs with leveling feet.
OAD: 197″ L x 30″ wide x 29″ H
5J8342 Cozzini, model CMB10000, 220 Ft³ total (170 Ft³ working) capacity, stainless steel, dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs dimensions: 72″ wide x 125″ long x 47″ deep. Equipped with single side top safety grate, 108″ infeed height, 20″ wide x 10″ high paddles on a 4½” diameter shaft, shaft spin powered by (2) devoted 40 Hp drives, (2) end mounted 29″ wide x 13½” high pneumatic discharge gates with 57″ ground clearance. Mounted on stainless steel frame with leveling legs.
OAD: 172″ L x 87″ W x 116″ H
5J8341 Cozzini, model CMB10000, 220 Ft³ total (170 Ft³ working) capacity, stainless steel, dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs dimensions: 72″ wide x 125″ long x 47″ deep. Equipped with single side top safety grate, 108″ infeed height, 20″ wide x 10″ high paddles on a 4½” diameter shaft, shaft spin powered by (2) devoted 40 Hp drives, (2) end mounted 29″ wide x 13½” high pneumatic discharge gates with 57″ ground clearance. Mounted on stainless steel frame with leveling legs.
OAD: 172″ L x 87″ W x 116″ H
Friesen’s Incorporated, hydraulic, stainless steel, ground level loading tote dumper. Rated for a maximum lift of 4,000 Lbs. Tote chamber dimensions: 50½” L x 46″ wide; adjustable height range of 44″ to 55″. Equipped with pneumatic side load clamps, 48″ pivot height, 48″ discharge height, adjustable height bar, powered by a 7½ Hp hydraulic power pack. Control panel with raise and lower. Mounted in stainless steel frame with safety guarding.
OAD: 88″ L x 75″ W x 90″ H
5J8344 Safeline Mettler Toledo, models Profile Advantage and SL2000, stainless steel, variable speed, inline, right to left, retracting nose conveyor through metal detector with amount of product per hour – depending on materials and application. Total aperture: 7″ high x 13¾” wide; Working aperture: 5½” high x 12″ wide. Equipped with 36″ to 42″ infeed / discharge height range, 12″ wide x 72″ long flexlink belt powered by a ¾ Hp center mounted drive, retracting nose reject, 19″ long x 7″ wide x 11″ deep locking stainless steel reject bin. Mounted on stainless steel frame with (4) legs with leveling feet.
OAD: 77″ L x 43″ wide x 54″ H
5J5852 FPEC, Model MC, 316 S/S stainless steel, single shaft, jacketed ribbon cooker. Pounds of product per hour – depending on materials and application. Capacity: 100 ft³ total (80 ft³ working). Trough dimensions: 96″ in Length; 50″ in Width; 51″ in Depth. Equipped with rolling top cover, infeed height of 110″ (152″ if mounted on frame), 49″ diameter x ½” thick ribbon, (7) 20″ long x 5″ wide paddles, scrapers, 5″ diameter mixing shaft, (4) steam injection ports fed by ¾” NPTs, 4″ Tri-clamp discharge with 49″ ground clearance (87″ if mounted on frame). Powered by 14¾ Hp drive.
Top ports:
(2) 4″ Tri-clamp
(3) 2½” Tri-clamp
Jacket ports:
(16) 1″ NPT
MAWP (Shell): ATM PSI @ 320°F
MDMT (Shell): -20°F @ ATM PSI
MAWP (Jacket): 90 PSI @ 320°F
MDMT (Jacket): -20°F @ 90 PSI
OAD (without frame): 157″ L x 57″ W x 114″ H
OAD (on frame): 157″ L x 57″ W x 152″ H
Fitzmill, Model DKAS012, Hammer mill with pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 19″ wide x 25″ long x 4″ deep feed pan, (16) swinging impact / knife blades and 10″ x 12″ bottom discharge with 30″ ground clearance and 7½ Hp, motor drive. Mounted on (4) leg frame
O.A.D.: 48″L x 44″W x 64″H
Peerless, model DA50K-20, Kleanview open frame, 450 lbs, 79.2 gallon, 304 S/S, jacketed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 28″ long x 36″ wide x 33″ deep, working capacity of 10.6 ft³ (17.4 ft³ total). Equipped with 12″ top mounted pneumatic slide gate product charge port with a 106″ infeed height, double sigma mixing blades powered by a 20 hp drive, 120° tilt out with a 36″ discharge height powered by a 2 hp hydraulic pack. Control panel with AB PLC and touchscreen HMI.
Top ports:
(1) 5″ vent
(2) 2″ ID seated bevels
Jacket ports:
(2) 1½” NPT
MAWP: 230 PSI @ 180° F
OAD (Mixer): 91″ L x 64″ W x 106″ H
OAD (cabinet): 74″ L x 23″ W x 77″ H
JBT Food Tech, 240" x 60" stainless steel retort system. Equipped with roller carts, pump and heat exchanger. Control panel with touch screen HMI and chart recorder.
