Product
Heat and Control, Model 8-44-BOILER, stainless steel natural gas fired boiling conveyor. Equipped with a 42" wide x 16" long mesh infeed conveyor, 42" wide belt thru 120" long chamber with 92" long submersion conveyor, powered hood lift and circulation pump. Mounted on leveling pads with an infeed height of 47" and a discharge height of 44".
OAD: 155"L x 85"W x 72"H
Stainless steel hammer mill with production rates per minute – depending on materials, application and machine configuration. Equipped with a 31" long x 23" wide x 20" deep hopper with a 10" x 11" internal magnet, 8" diameter feed throat, 10" diameter x 4" deep impact chamber, (2) fixed impact blades powered by a 7.3 hp drive and 14" long x 8" wide bottom product discharge with 41½” ground clearance. Mounted on a painted frame.
OAD: 50"L x 26"W x 80"H
Solbern Model LCB stainless steel, in-line free standing, self driven economic briner designed for running one or various size containers on the same line with containers per minute – depending on materials and application. Equipped 58" long x 10" wide x 10" high stainless steel top product tank and with 156" long single 1/4" OD rubber container belt, with guide rails, containers are angled to regulate head space for accurate fills and slight over flow. thru and before leaving the fill area and has 80" long x 24" wide x 16" high bottom stainless steel overflow tank with perforated particle panels. All stainless steel sanitary piping and Waukehaw 130 PD pump.
OAD: 156" L x 66" W x 79" H
Dorner, aluminum frame table top conveyor. Equipped with a 12" wide x 119" long Intralox belt powered by a 1 Hp drive and mounted on (6) leveling legs with an infeed / discharge range of 27" to 42".
OAD: 120"L x 22"W x 38"H
Piston Filler for Holmatic.
Piston Filler for Holmatic.
Piston Filler for Holmatic.
Star, Model 20SS4 113S2 TIC, horizontal, stainless steel, plate and frame filter press. Volumes of product per hour – depending on materials, application and machine configuration. Equipped with (20) 12-7/8" x 12-7/8" square plates with filteration area of 10 ft², 1½" thick sludge plates with a sludge capacity of 1¼ ft³, 2"OD / ¾"ID Tri-clamp inlet, 2"OD / ¾"ID Tri-clamp outlet, hand crank filter closure and pressure guage. Mounted on (4) leg base frame with casters.
OAD: 84" L x 24" W x 50" H
Hayes & Stolz, 10 cu ft, 304 stainless steel, double ribbon mixer with amount of product per hour – depending on materials and application, Equipped with 43" Long x 22" Wide x 24" Deep mixing chamber, two piece flip cover with safety grid and two top ports (one 8" OD flanged 6" ID & one 6" OD flanged 3" ID), double ribbons on 3-1/2" diameter shaft. Bottom end (10" OD flanged / 6" ID) discharge port at 19" floor clearence, split type packing seals with air purge with a chain to sproket motor drive.
OAD: 90" L x 45" W x 52" H
Merrill drum dumper with 120" high columm, 13" diameter x 24" long barrel holder with dual barrel clamps and 80" discharge height.
OAD: 54"L x 50" W x 120" H
Best Industrial, stainless steel belt conveyor. Equipped with a 22¾" wide x 96" long belt with a 34" infeed / discharge height. Control box with push button start stop and variable speed controller.
OAD: 97"L x 33"W x 37"H
Stainless steel offline accumilation table, 90" wide x 233" long belt with a 35" infeed and discharge height. Mounted on stainless steel base frame.
OAD: 245"L x 98"W x 39"H