Barry Wehmiller Machines


Barry Wehmiller Machines In Stock

Barry Wehmiller Case Packer Wrap Around 2000W

Automatic, all S/S wraparound case erector, packer, sealer capable of speeds up to 12cpm, depending on application. Case size range of: 9 1/2" -24" L x 9" x 17" W x 4"-12" H, and has 60" L x 48" W flat blank carton magazine, recipricating suction cup pic-n-place, top flap closer, right to left 108" L x 4" W plastic flex-link product infeed conveyor, single arm product loader, Nordson AG30 Microsert H/M glue system with aqua guard, A/B PLC , Nematron touch pad screen controller, Marsh coder, interlocking safety guarding.

OAD: 108" L x 204" W (with infeed) 72" W (without infeed) x 88" H

Get a Free Quote Call: 630-629-9900

Barry Wehmiller Case Packer Wrap Around 2000W 12 cpm, 24"L x 17"W x 12"H, H/M

Automatic, all stainless steel wraparound case erector, packer, sealer rated from 5 to 12 cases per minute – depending on materials and application. Case size range: 9-1/2" to 24" in Length; 9" to 17" in Width; 4" to12" in Height. Equipped with 60" long x 48" wide flat blank carton magazine, recipricating suction cup pic-n-place, top flap closer, right to left 108" long x 4" wide plastic flex-link product infeed conveyor, single arm product loader, Nordson AG30 Microsert hot melt glue system with aquaguard, A/B PLC , Nematron touch pad screen controller, Marsh coder, interlocking safety guarding.

OAD: 108" L x 204" W (with infeed) 72" W (without infeed) x 88" H

Get a Free Quote Call: 630-629-9900

Barry Wehmiller Shrink Bundler ZB20A

Barry Wehmiller, Model ZB20A, right angle shrink bundling system with lane in feed. Rated from 5 to 30 bundles per minute – depending on materials, application and machine configuration. Maximum product height: 12"; maximum film width: 20". Equipped with 12" wide x 126" long Intralox in feed conveyor with 1 to 4 lane overhead servo diverter, single product pusher plate, 20" wide hot knife seal bar with 12" vertical travel, tamp bundle hold down, stainless steel shrink tunnel with 24" wide x 16" high aperture and 27" long chamber with 24" wide x 50" long thru belt conveyor. Control panel with an AB controller with AB PanelView Plus 600 touch screen display. All stainless steel frame and enclosure with lexan doors and machine leveling screws and pads.

OAD: 142"L x 157"W x 87"H

Get a Free Quote Call: 630-629-9900

Barry Wehmiller Unscrambler Accumulators 10’X24′

Ambec stainless steel frame bi-directional accumulation table, 10’wide x 24’long x 40"high. Equipped with 2-1/4"high nylon side guide rails with 6" adjustable rail angle brackets. Height adjustable with 13"high x 4-1/2"wide stainless steel leg extention bracket.
2hp, 460V, 60Hz, 3Ph, 2.7Amps, 1725rpm
with A-B disconnect switch.

OAD: 291"long x 136"wide x 51"high

Get a Free Quote Call: 630-629-9900

Barry Wehmiller Case Packer Erector/sealer 3000

Barry Wehmiller, Model 3000NSC, automatic, stainless steel wrap around case packer. Rated from 1 to 8 cases per minute – depending on materials, application, pack pattern and machine configuration. Case size: 3" to 12" long x 3" to 12" wide x 4½" to 13" deep. Equipped with 18" long case magazine, (2) vacuum suction cup pick and place, lugged holder case conveying system, Nordson hot melt glue system and safety guarding. Control panel has an AB controller and touch screen controls. Mounted on heavy duty base frame.

OAD: 93"L x 50"W x 76"H

Get a Free Quote Call: 630-629-9900

Barry Wehmiller Shrink Flow Thru HW-12

Automatic, S/S, flow thru, shrink wrapper, with tunnel capable of speeds up to 60 ppm, depending on product size. Has a 72" L x 8" W plastic delron product infeed conveyor and 36" infeed height, product laner with (3) single arm collating section, to forming head, 14" W hot knife seal jaw, and static bottom lap seal, product top hold down to shrink tunnel, and can handle up to 29" W film width. S/S shrink tunnel, has 20" W x 10 1/2" H aperture x 34" L tunnel and a 60" L x 12" W fiber mess conveyor belt with a 36" discharge height. A/B plc with (3) Watlow temp controllers for oven, oven blower, and seal bar, with LED readout, and start and e-stop buttons.

OAD: 144" L x 48" W x 75” H

Get a Free Quote Call: 630-629-9900