Fluid Air Machines


Fluid Air Machines In Stock

Fluid Air Mill Hammer 014

Photo of Fluid Air Mill Hammer 014
Thumbnail of Fluid Air Mill Hammer 014 Thumbnail of Fluid Air Mill Hammer 014 Thumbnail of Fluid Air Mill Hammer 014 Thumbnail of Fluid Air Mill Hammer 014 Thumbnail of Fluid Air Mill Hammer 014

Fluid Air Mill Hammer 014

  • Manufacturer: Fluid Air
  • Model Number: 014
  • Frain Number: 5J1440

Fluid Air, Model 014, stainless steel hammer mill. Equipped with 7½" diamter feed throat into 14" long milling chamber with a (4) arm beater bar and has 3" diameter discharge pipe and is powered by 20 Hp motor drive with reset and e-stop push button controls. Mounted on a stainless steel (4) leg frame.

OAD: 58"L x 34"W x 51"H

Get a Free Quote Call: 630-629-9900

Fluid Air Mill Hammer 007

Photo of Fluid Air Mill Hammer 007
Thumbnail of Fluid Air Mill Hammer 007 Thumbnail of Fluid Air Mill Hammer 007 Thumbnail of Fluid Air Mill Hammer 007 Thumbnail of Fluid Air Mill Hammer 007 Thumbnail of Fluid Air Mill Hammer 007

Fluid Air Mill Hammer 007

  • Manufacturer: Fluid Air
  • Model Number: 007
  • Frain Number: 5H7502

Fluid Air, Model 007 Granumill, all stainless steel pilot size product reduction system. Capable of handling both wet or dry products with thru puts from 2 to 2250 lbs per hour, has screen width of 7" and capable of handling 10 to 400 size mesh with finished reduction particle sizes from 2000 to 27 microns all with proper change parts and depending on materials and application. Maximum speeds of 5,000 rpm’s and maximum tip speed of 21,000 feet per minute. Equipped with 18" long x 15" wide x 15" deep stainless steel product hopper with 3" OD x 28" long product feed screw and secondary pan feeder to reduction chamber with bolt down cover and (4) fixed rotary impact blades with flat square and rounded blades for impacting hard materials and fine grinding also breaking up soft or wet materials. Control panel has frequency and fault controls with mill and feeder readouts for rpm and percent of load controllers. Mounted on stainless steel base frame with casters.

OAD: 48" L x 32" W x 78" H

Get a Free Quote Call: 630-629-9900