Lee Machines

Lee Kettle Triple Motion 50U7S

• Manufacturer: Lee
• Model Number: 50U7S
• Frain Number: 5H8682

Lee Model 50U7S, 316 stainless steel, 50 gallon, full jacketed, Internal vacuum rated, triple motion kettle with gallons of product per hour – depending on materials and application. Equipped with bolt down top cover with (1) center top mounted anchor style agitator and (1) off center top mounted turbine agitator and (1) off center top mounted prop agitator with full side and bottom jacket. Dish bottom has 6" OD sanitary center bottom discharge with 60" floor clearance. Mounted on (3) stainless steel legs.

Vessel Dimensions: 38" OD; 28" Deep

Jacket rated: MAWP 100psi @ 338°F; MDMT of -20°F @ 100psi.

Internal full vacuum rated

Top Ports:
(5) 2" OD Sanitary Ports
(2) 3" OD Sanitary Ports
(1) 8" OD Sanitary Manway

Bottom Port:
(1) 6" OD Sanitary Discharge Port

Jacket Ports:
(2) 1-1/2" OD Threaded Side Ports
(2) 1-1/2" OD Threaded Bottom Ports

National Board: # 11177

OAD: 38" L x 38" W x 120" H

Lee Kettle Double Motion 25D9MT

• Manufacturer: Lee
• Model Number: 25D9MT
• Frain Number: 5H8500

Lee, Model 25D9MT, 25 gallon, 304 stainless steel jacketed kettle with amount of product per hour – depending on materials and application. Vessel Dimensions: 23" diameter x 20" deep with 10" straight wall. Equipped with tilt out bridge mounted scrape agitator powered by single ¾ Hp motor drive and 2½"OD / 2"ID Tri-Clamp discharge with 16" clearance to frame. Control panel with start, stop push buttons.

Jacket Fittings:
(2) ¾" NPT

MAWP: 40 PSI @ 287° F
Nat’l Brd: 3214

OAD: 60"L x 30"W x 68"H

Lee Tank SS Single Wall 1000DBCCT

• Manufacturer: Lee
• Model Number: 1000DBCCT
• Frain Number: 5H8873

Lee, 1000 gallon capacity, 316 stainless steel single wall mixing tank. Vessel dimensions: 66" diameter x 70" straight wall with dish style bottom. Equipped with 15" diameter top manway, paddle agitator and has 20" x 15" side bottom manway with flip open cover. Mounted on (4) legs with 3½" OD / 3" ID bottom discharge with butterfly valve and 15" ground clearance.

Top Ports:
(1) 10" diameter open vent

OAD: 75"L x 68"W x 144"H

Lee Tank Reactor SS 55CBT

• Manufacturer: Lee
• Model Number: 55CBT
• Frain Number: 5H8776

Lee, Model 55 CBT, 55 Gallon capacity, 316 stainless steel, single wall vacuum tank. Equipped with 28" ID x 28" deep vessel with 21" straight wall and has pneumatic tilt up cover. Cone bottom has 2"OD / 1½"ID tri-clamp style discharge with 17" ground clearance. Mounted on (4) stainless steel legs with casters.

Top Ports:
(1) 10½"OD / 9¾" ID Tri-Clamp
(1) 6½"OD / 5¾" ID Tri-Clamp
(3) 3½"OD / 3" ID Tri-Clamp
(2) 2"OD / ¾" ID Tri-Clamp

MAWP: 5 PSI / FV @ 227°F (Vessel)
MDMT: -20°F @ 5 PSI / FV

OAD: 55"L x 50"W x 55"H

Lee Kettle Double Motion 100D7T

• Manufacturer: Lee
• Model Number: 100D7T
• Frain Number: R35692

Lee, Model 100D7T, 100 gallon, 316 stainless steel jacketed and insulated double motion kettle. Vessel Dimensions: 36" diameter x 30" deep with 15" straight wall. Equipped with tilt out bridge mounted scrape surface agitation powered by a 1 hp drive and prop agitation powered by a ¼ hp drive, fixed baffle, 2"OD / 1½"ID Tri-clamp bottom discharge with 15" ground clearance. Mounted on (3) stainless steel legs.

MAWP: 90 psi @ 332°F
MDMT: -20°F @ 90 PSI
National Board: 12231

Top Access Ports:
(3) 2½"OD / 2"ID Tri-clamp

Jacket Ports:
(2) 1" NPT
(1) ¾" NPT

OAD: 62"L z 43"W x 75"H

Lee Kettle Triple Motion 1000GALD12T

• Manufacturer: Lee
• Model Number: 1000GALD12T
• Frain Number: R33860

Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with stainless steel mezzanine, tilt out bridge mounted double motion scrape agitator powered by 30 Hp drive, high shear agitator powered by 60 Hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.

Jacket Fittings: 2" NPT

Nat’l Brd: 7577
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)

MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)

OAD: 118"L x 76"W x 202"H

Lee Kettle Triple Motion 1000GALD12T

• Manufacturer: Lee
• Model Number: 1000GALD12T
• Frain Number: R33861

Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with a tilt out bridge mounted double motion scrape agitator powered by a 30 Hp drive, high shear agitator powered by a 60 hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.

Jacket Fittings: 2" NPT

Nat’l Brd: 7577
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)

MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)

OAD: 118"L x 76"W x 202"H

Lee Tank SS Single Wall 40CB

• Manufacturer: Lee
• Model Number: 40CB
• Frain Number: R32920

Lee, 40 gallon total capacity, 316 stainless steel mixing tank. Vessel dimensions: 23" diameter x 27" deep with a 24" straight wall. Equipped with clamp down lid, side mounted prop mixer powered by a pneumatic drive. Dish bottom has 2"OD / 1½"ID Tri-Clamp style discharge with 25" ground clearance. Mounted on (4) stainless steel legs with casters.

OAD: 40"L x 40"W x 80"H

Lee Tank SS Single Wall 100DBT

• Manufacturer: Lee
• Model Number: 100DBT
• Frain Number: R33972

Lee, Model 100 DBT, 304 stainless steel tank. Vessel dimensions: 30" diameter x 38" deep with a 35" straight wall. Equipped with a lift off cover, bridge mounted prop agitation powered by a 3 hp drive and 2½"OD / 2"ID Tri-Clamp style discharge. Mounted on (4) stainless steel legs with casters.

OAD: 42"L x 40"W x 80"H

Lee Tank SS Single Wall 150DBT

• Manufacturer: Lee
• Model Number: 150DBT
• Frain Number: R33970

Lee, Model 150 DBT, 304 stainless steel tank. Vessel dimensions: 36" diameter x 48" deep with a 35" straight wall. Equipped with a lift off cover, bridge mounted prop agitation powered by a 3 hp drive and 2½"OD / 2"ID Tri-Clamp style discharge with butterfly valve and 10" ground clearance. Mounted on (4) stainless steel legs with casters.

OAD: 48"L x 42"W x 80"H

Lee Tank Reactor SS 55CBT

• Manufacturer: Lee
• Model Number: 55CBT
• Frain Number: 5H7598

Lee, 55 Gallon capacity, 316 stainless steel, internal vacuum tank. Vessel dimensions: 28" diameter x 28" deep with a 21" straight wall. Equipped with tilt off bolt down lid and 2"OD / ¾"ID Tri-Clamp style discharge with 17" ground clearance. Mounted on (4) stainless steel legs with casters.

Top Ports:
(1) 10½"OD / 9¾"ID Tri-Clamp
(1) 6½"OD / 5¾"ID Tri-Clamp
(4) 3½"OD / 3"ID Tri-Clamp
(2) 2"OD / ¾"ID Tri-Clamp

MAWP: 5PSI / FV @ 227°F (Vessel)
MDMT: -20°F @ 5PSI / FV (Vessel)

OAD: 57"L x 46"W x 56"H

Lee Tank SS Single Wall 150DBT

• Manufacturer: Lee
• Model Number: 150DBT
• Frain Number: R33975

Lee, Model 150 DBT, 304 stainless steel tank. Vessel dimensions: 36" diameter x 48" deep with a 35" straight wall. Equipped with a lift off cover, bridge mounted prop agitation powered by a 3 hp drive and 2½"OD / 2"ID Tri-Clamp style discharge with butterfly valve and 10" ground clearance. Mounted on (4) stainless steel legs with casters.

OAD: 48"L x 42"W x 80"H