Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Savage / WC Smith chocolate enrober with 16" wide x 48" long neophreme product in feed conveyor,16" wide x 48" long stainless steel wire mesh belt thru enrober, water jacketed pump with vari speed drive, adjustable (2) curtain chocolate flow pan, bottom roller with adjustable pool and on / off switch, 9 gallon product tank, vari speed blower and product shaker, exit detailer with adjustable postion, speed and temperature controls, water jacketed chocolate reservoir with heaters and agitator, optical level sensor for incoming chocolate, and has onboard tempering capabilities. PLC touch screen controls and statis light bar.
OAD: 108" L x 43" W x 80" H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
All Fill, Model R-242, dual head, 24 filling stations, rotary, continous motion, stainless steel auger filler. Rated up to 400 containers per minute – depending on materials, application and machine configuration. Container size up to 6½" in diameter with proper change parts. Equipped with 3" wide x 114" long Delrin through conveyor, 24" long worm screw to star wheel indexing, dual auger fillers, 60" OD turret with (24) 2½" ID funnels set on 7" centers. Control panel with touch screen HMI and statis light bar. Mounted on heavy duty stainless steel frame with leveling legs and cage style safety guarding.
OAD: 134" L x 92" W x 99" H
Powell Systems, model PSI-BE2-DSS, Z style bucket elevator. Number of lbs of product per hour – depending on materials and application. Equipped with white plastic product buckets with inside dimensions of 15" long x 4½" wide x 4" deep, 36" long horizontal floor run with a 17" long load area, 18" feed height, 124" vertical lift with a 18½" wide frame, 65" overhead horizontal top run with 8" diameter discharge funnel with a 123" discharge height. Control panel with push button start, E-stop and variable speed control.
OAD: 115"L x 24"W x 143"H
Angelus, Model 4V, automatic, heavy duty, 4 head stainless steel can seamer. Rated from 100 to 450 cans per minute – depending on materials and application, Has min / max can size range of: 200 to 401 in Diameter x 113 to 800 in Height with proper change parts. Equipped with 3" wide container infeed conveyor with a 32" long worm screw indexing, lugged chain set on 6½" centers, (4) revolving rotary seaming heads, (4) rotary can pedestals, 90" long vibratory lid magazine, no-can / no-lid, and 10 Hp motor drive. Control panel with touch screen HMI.
OAD: 184"L x 155"W x 96"H
Angelus, Model 2004 RCM, automatic, heavy duty, 4 head stainless steel can seamer. Rated up to 400 cans per minute – depending on materials, application and machine configuration. Has min / max can size range of: 200 to 404 in Diameter x 113 to 800 in Height with proper change parts. Equipped with 1" wide container infeed conveyor with a 35" long worm screw indexing, lugged chain set on 6½" centers, (4) revolving rotary seaming heads, (4) rotary can pedestals, 84" long vibratory lid magazine, no-can / no-lid, and 15 Hp motor drive. Control panel with touch screen HMI.
OAD: 149"L x 132"W x 105"H (seamer)
OAD: 46"L x 14"W x 61"H (electric cabinet)
