Product
Fitzmill, Model DKAS012, Hammer mill with pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 19″ wide x 25″ long x 4″ deep feed pan, (16) swinging impact / knife blades and 10″ x 12″ bottom discharge with 30″ ground clearance and 7½ Hp, motor drive. Mounted on (4) leg frame
O.A.D.: 48″L x 44″W x 64″H
Peerless, model DA50K-20, Kleanview open frame, 450 lbs, 79.2 gallon, 304 S/S, jacketed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 28″ long x 36″ wide x 33″ deep, working capacity of 10.6 ft³ (17.4 ft³ total). Equipped with 12″ top mounted pneumatic slide gate product charge port with a 106″ infeed height, double sigma mixing blades powered by a 20 hp drive, 120° tilt out with a 36″ discharge height powered by a 2 hp hydraulic pack. Control panel with AB PLC and touchscreen HMI.
Top ports:
(1) 5″ vent
(2) 2″ ID seated bevels
Jacket ports:
(2) 1½” NPT
MAWP: 230 PSI @ 180° F
OAD (Mixer): 91″ L x 64″ W x 106″ H
OAD (cabinet): 74″ L x 23″ W x 77″ H
JBT Food Tech, 240" x 60" stainless steel retort system. Equipped with roller carts, pump and heat exchanger. Control panel with touch screen HMI and chart recorder.
Lot#17
Peerless, model DA200K-60, Kleanview open frame, 1500 Lbs, 225 gallons, 48 Ft³ total ( 30.2 Ft³ working) capacity, 304 S/S, variable speed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 47" long x 45" wide x 35" deep. Equipped with 12" ID top mounted pneumatic slide gate product charge port with a 108" infeed height, double sigma mixing blades powered by a 60 hp drive, 120° tilt out powered by a 3 hp hydraulic pack with a 37" discharge height. Control panel with AB PLC and touchscreen HMI.
Top ports:
(1) 5" vent
(2) 2" ID seated bevels
OAD (Mixer): 123" L x 78" W x 123" H
OAD (cabinet): 61" L x 24" W x 78" H
Lee, model 30GALD9MT, 30 gallon capacity, 316 stainless steel contact parts, variable speed, tilt out double motion agitation, cart mounted, jacketed kettle. Vessel dimensions: 23" diameter with a 10" straight wall and 22" total depth. Equipped with bolt down lid with a 44" infeed height, tilt out bridge mounted scrape surface agitation powered by a 2 Hp drive, flush mounted temperature probe, 5" diameter sight glass, 3" Tri-clamp discharge with ball valve and 6½" clearance to cart. Mounted on stainless steel cart with locking casters.
Top ports:
(1) 3" Tri-clamp
(2) 2" Tri-clamp
(1) 1½" Tri-clamp
Jacket ports:
(4) ¾" NPT
Vessel MAWP: 30 PSI @ 250°F
Jacket MAWP: 90 PSI @ 332°F
Vessel MDMT: -20°F @ 30 PSI
Jacket MDMT: -20°F @ 90 PSI
Nat’l Brd: 7020
OAD: 75" L x 36" W x 72" H
Ross, Model 42N-25S, 30 ft³ total (25 ft³ workable), 316 stainless steel, double ribbon mixer with amount of product per hour – depending on materials and application. Inner mixing chamber dimensions of: 60" in Length; 29" in Width; 33" in Depth. Equipped with flip up cover, flip cover has a 18" x 10" hatch and a 12" diameter open vent, 89" infeed height, 3½" OD mixing shaft with 28½" diameter x ½" thick stainless steel ribbons powered by 10 Hp variable speed drive, 4" diameter Tri-clamp center bottom discharge with slide gate valve and 50" ground clearance. Mounted on 45" high leg extensions.
OAD: 94"L x 48"W x 99"H