Product
United Systems Inc., 88″ discharge height, stainless steel, variable speed, “Z” style cleated incline conveyor. Equipped with 12″ wide (10½” usable) x 286″ long flexlink belt, 10¾” wide x 2″ high cleats set on 13″ centers, 144″ long bottom horizontal run with a 24″ infeed height, 112″ incline section, 30″ top horizontal run, powered by a top mounted 2 Hp drive. Control panel with belt speed controls. Mounted on stainless steel frame with (8) legs with leveling feet.
OAD: 284″ L x 21″ W x 104″ H
Eastey, model ESA40100-TKV1/ETB4820, semi-automatic L-Bar sealer and shrink tunnel system.
Model ESA40100-TKV1 L-Bar sealer has a package size range: up to 98″ in length; 7½” to 37½” in width, 1″ to 22¼” in height. Equipped with 40″ wide cross seal bar and 100″ long side seal bar, powered film unwind, 103″ long x 44″ wide product load table with film inverter, 100″ long x 36″ wide product conveyor, scrap re-wind, pneumatic L-Bar lift. Film specifications: up to 44″ in width; 10″ max roll OD.
Eastey model ETB4820, single zone shrink tunnel. Total aperture: 50″ wide x 20″ high (49″ wide x 18½” high working aperture). Equipped with 48″ wide x 144″ long flex link conveyor with a 35″ discharge height, (4) top mounted blower, (3) fans at discharge. Dual temperature controls, conveyor speed and variable velocity airflow. Speeds dependent on materials, application, machine configuration and operator dexterity.
OAD (sealer): 208″ L x 81″ W x 56″ H
OAD (heat tunnel): 147″ L x 73″ W x 79″ H
OAD (Complete system): 355″ L x 81″ W x 79″ H
Airgas, model TL-2048, stainless steel, inline, liquid nitrogen freeze tunnel with pound of product per hour – depending on materials, application, and machine set-up. Equipped with 4½” high x 48″ wide product aperture, 50″ wide (48″ usable) x 315″ long stainless steel wire mesh belt, belt powered by a 1 Hp drive, 42″ infeed / discharge height, (8) top mounted fans powered by (8) 1 Hp drives. Control panel with touch pad HMI and AB PLC. Mounted on stainless steel frame with (12) legs with leveling feet.
OAD: 326″ L x 111″ W x 103″ H
Quadro, model SDx, 316 stainless steel, variable speed, sifter with pounds of product per hour – depending on materials, application, and machine setup. Equipped with Quadro S20x Flexsift sifting head, 15″ diameter x 6″ deep product hopper with a 54″ infeed height, 8″ diameter x 4″ deep sifting chamber, 11″ diameter discharge with 33″ ground clearance, machine powered by a 7½ Hp drive. Control panel with PLC and touchscreen HMI. Mounted on stainless steel frame with (4) casters.
Machine is equipped with SMARTdetect, in which it automatically detects when a different milling / sifting head is put on the machine and adjusts the speed automatically through the VFD.
OAD: 77″ L x 36″ W x 54″ H
Bizerba, model CWP MAXX, stainless steel, dual lane checkweigher with number of packages per hour – depending on materials and application. Capable of handling packages up to 5.9″ in length and 7.8″ in width and from 5 to 3000 grams. Equipped with (2) 8″ wide x 41″ long belts, infeed/discharge height range of 39.5″ to 51.2″, 17″ long x 7.5″ wide load cell. Control panel with proprietary PLC and touchscreen HMI. Mounted on stainless steel frame with (4) leveling legs.
OAD: 58″ L x 46″ W x 76″ H
10″ wide x 192″ long, white belt, variable speed, stainless steel, tabletop conveyor. Equipped with 10″ wide x 192″ long belt, 24″ to 30″ infeed / discharge height range, 16″ wide x 194″ long drip tray, powered by a center mounted 1 Hp drive. Mounted on stainless steel frame with (6) legs with leveling feet.
OAD: 197″ L x 30″ wide x 29″ H
Cozzini, model CMB10000, 220 Ft³ total (170 Ft³ working) capacity, stainless steel, dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs dimensions: 72″ wide x 125″ long x 47″ deep. Equipped with single side top safety grate, 108″ infeed height, 20″ wide x 10″ high paddles on a 4½” diameter shaft, shaft spin powered by (2) devoted 40 Hp drives, (2) end mounted 29″ wide x 13½” high pneumatic discharge gates with 57″ ground clearance. Mounted on stainless steel frame with leveling legs.
OAD: 172″ L x 87″ W x 116″ H
Cozzini, model CMB10000, 220 Ft³ total (170 Ft³ working) capacity, stainless steel, dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs dimensions: 72″ wide x 125″ long x 47″ deep. Equipped with single side top safety grate, 108″ infeed height, 20″ wide x 10″ high paddles on a 4½” diameter shaft, shaft spin powered by (2) devoted 40 Hp drives, (2) end mounted 29″ wide x 13½” high pneumatic discharge gates with 57″ ground clearance. Mounted on stainless steel frame with leveling legs.
OAD: 172″ L x 87″ W x 116″ H
Friesen’s Incorporated, hydraulic, stainless steel, ground level loading tote dumper. Rated for a maximum lift of 4,000 Lbs. Tote chamber dimensions: 50½” L x 46″ wide; adjustable height range of 44″ to 55″. Equipped with pneumatic side load clamps, 48″ pivot height, 48″ discharge height, adjustable height bar, powered by a 7½ Hp hydraulic power pack. Control panel with raise and lower. Mounted in stainless steel frame with safety guarding.
OAD: 88″ L x 75″ W x 90″ H
Safeline Mettler Toledo, models Profile Advantage and SL2000, stainless steel, variable speed, inline, right to left, retracting nose conveyor through metal detector with amount of product per hour – depending on materials and application. Total aperture: 7″ high x 13¾” wide; Working aperture: 5½” high x 12″ wide. Equipped with 36″ to 42″ infeed / discharge height range, 12″ wide x 72″ long flexlink belt powered by a ¾ Hp center mounted drive, retracting nose reject, 19″ long x 7″ wide x 11″ deep locking stainless steel reject bin. Mounted on stainless steel frame with (4) legs with leveling feet.
OAD: 77″ L x 43″ wide x 54″ H
FPEC, Model MC, 316 S/S stainless steel, single shaft, jacketed ribbon cooker. Pounds of product per hour – depending on materials and application. Capacity: 100 ft³ total (80 ft³ working). Trough dimensions: 96″ in Length; 50″ in Width; 51″ in Depth. Equipped with rolling top cover, infeed height of 110″ (152″ if mounted on frame), 49″ diameter x ½” thick ribbon, (7) 20″ long x 5″ wide paddles, scrapers, 5″ diameter mixing shaft, (4) steam injection ports fed by ¾” NPTs, 4″ Tri-clamp discharge with 49″ ground clearance (87″ if mounted on frame). Powered by 14¾ Hp drive.
Top ports:
(2) 4″ Tri-clamp
(3) 2½” Tri-clamp
Jacket ports:
(16) 1″ NPT
MAWP (Shell): ATM PSI @ 320°F
MDMT (Shell): -20°F @ ATM PSI
MAWP (Jacket): 90 PSI @ 320°F
MDMT (Jacket): -20°F @ 90 PSI
OAD (without frame): 157″ L x 57″ W x 114″ H
OAD (on frame): 157″ L x 57″ W x 152″ H
Fitzmill, Model DKAS012, Hammer mill with pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 19″ wide x 25″ long x 4″ deep feed pan, (16) swinging impact / knife blades and 10″ x 12″ bottom discharge with 30″ ground clearance and 7½ Hp, motor drive. Mounted on (4) leg frame
O.A.D.: 48″L x 44″W x 64″H