Peerless, model DA50K-20, Kleanview open frame, 450 lbs, 79.2 gallon, 304 S/S, jacketed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 28″ long x 36″ wide x 33″ deep, working capacity of 10.6 ft³ (17.4 ft³ total). Equipped with 12″ top mounted pneumatic slide gate product charge port with a 106″ infeed height, double sigma mixing blades powered by a 20 hp drive, 120° tilt out with a 36″ discharge height powered by a 2 hp hydraulic pack. Control panel with AB PLC and touchscreen HMI.
Top ports:
(1) 5″ vent
(2) 2″ ID seated bevels
Jacket ports:
(2) 1½” NPT
MAWP: 230 PSI @ 180° F
OAD (Mixer): 91″ L x 64″ W x 106″ H
OAD (cabinet): 74″ L x 23″ W x 77″ H
National Bulk Equipment, stainless steel, lump breaking metering hopper and tote dumper system with pounds of product per hour – depending on materials and application.
Tote dumper Lift capacity: 750 Lbs. Tote chamber dimensions: 53″ wide x 48″ deep with an adjustable height range between 27″ and 55½”. Equipped with 35″ high x 48½” wide x 8″ deep discharge chute with a discharge height of 151″, 7½ Hp hydraulic power pack with a 20 gallon reservoir. Tote dumper requires 266″ ceiling clearance.
Top live bottom metering hopper chamber dimensions: 82″ wide x 105″ long x 34″ deep. Equipped with 58″ wide x 96″ long product belt powered by a 2 Hp drive, 24″ diameter agitation with (19) “stars” mounted on a 2″ shaft powered by a 2 Hp drive, each “star” has (3) 11″ high x 2″ wide arm, discharges at 133″ high. Mounted on 128″ high legs.
Bottom live bottom metering hopper chamber dimensions: 37″ wide x 72″ long x 37″ deep. Equipped with 18″ wide x 100″ long product belt powered by a center mounted 2 Hp drive, (3)10¼” diameter lump breaker agitator bars powered by (3) devoted 3 Hp drives, 31″ high dust hood, discharge height of 87″. Mounted on 48″ high legs.
Control panel mounted on tote dumper with AB PLC and touch screen HMI.
System OAD: 243″ L x 125″ W x 187″ H
Urschel, model ETRS, stainless steel slicer used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 20″ diameter cutting wheel powered by a 3 Hp drive, 64″ long V-belt infeed with a 30″ long load area, 15″ long x 2″ wide top compression belt, variable speed controls for both the belt and wheel. Ideally suited for elongated firm products to 4″ diameter and 6″ diameter for compressible leafy products. Mounted on stainless steel (4) leg base frame with casters. Capable of flat slices, crinkle slices, microcuts and julienne cuts. Change parts required to accommodate specific cut configuration
OAD: 98″L x 36″W x 63″H
Scott Equipment Company, model CR48X30SS, 304 stainless steel, dual shaft, lump breaker / crusher with pounds of product per hour – depending on materials and application. Equipped with 48″ wide x 30″ long x 30″ deep product crushing chamber, 34″ tall dust hood with a 27″ wide x 34″ tall product port with an infeed height of 73″, (18) sets of double sided 37″ diameter fixed blades on 5″ diameter shafts, each shaft has a devoted 50 Hp drive, 47″ wide x 30″ long discharge with 32″ ground clearance. Mounted on a stainless steel frame with (4) legs.
OAD: 120″ L x 63″ W x 102″ H
Peerless, model DA200K-60, Kleanview open frame, 1500 Lbs, 225 gallons, 48 Ft³ total ( 30.2 Ft³ working) capacity, 304 S/S, variable speed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 47" long x 45" wide x 35" deep. Equipped with 12" ID top mounted pneumatic slide gate product charge port with a 108" infeed height, double sigma mixing blades powered by a 60 hp drive, 120° tilt out powered by a 3 hp hydraulic pack with a 37" discharge height. Control panel with AB PLC and touchscreen HMI.
Top ports:
(1) 5" vent
(2) 2" ID seated bevels
OAD (Mixer): 123" L x 78" W x 123" H
OAD (cabinet): 61" L x 24" W x 78" H
JBT Food Tech, model Static Retort A146, stainless steel, batch, cooking, sterilizing and cooling retort system rated up to a 10,500 Lbs. batch capacity with amount of product per hour – depending on materials and application. Chamber dimensions: 250″ long with a 56″ interior diameter. Equipped with 240″ long chain basket conveyor powered by a 3 Hp drive, manually operated 60″ diameter door, Alfa Laval M6-FG plate and frame heat exchanger with 174.4 Ft² surface transfer area, 4 Hp centrifugal blower. Control panel with touchscreen HMI. Mounted on cradle style frame.
MAWP (Retort): 72.5 PSI @ 401°F
External MAWP (Retort): 3.6 PSI @ 401°F
MDMT (Retort): 14°F @ 72.5 PSI
MAWP (Heat exchanger): 150 PSI @ 250°F
MDMT (Heat exchanger): -20°F @ 150 PSI
OAD: 275″ L x 84″ W x 84″ H
Powell Systems, Model PSI-320, automatic, stainless steel, continuous motion, vertical form, fill, seal machine. Rated from 20 to 90 bags per minute – depending on materials, application and machine configuration. Bag size range: 2″ to 7″ in Width; 2″ to 8″ in length with proper change parts. Equipped with 9″ long vertical seal jaws, 8″ wide horizontal seal jaws, dual side film assist belts, film detection and tracking, registration film advance, and servo drive motors. Maximum film roll size: 12″ OD x 15″ Wide. Control panel has touch screen HMI controller with power on / off switch start and e-stop push buttons. Mounted on stainless steel base frame with interlocking Lexan guarding and leveling legs.
OAD: 49″L x 42″W x 48″H
Feldmeier, model EPC, 1,150 gallon total (1000 gallon working) capacity, stainless steel, scrape agitated, insulated and jacketed tank. Vessel dimensions: 72″ ID with a 60″ straight wall. Equipped with bridge mounted scrape agitation powered by a 5 Hp drive on a 3″ diameter shaft, top mounted 17″ diameter manway with flip up bolt down lid, no foam product entry mounted on a 3″ Tri-clamp fed by a 2″ Tri-clamp, thermowell, top mounted “N” shaped adjustable and removable baffle, bottom mounted instrumentation on a 2″ Tri-clamp, 3″ Tri-clamp discharge with 17½” ground clearance. Mounted on (4) legs.
Top ports:
(1) 3″ Tri-clamp (covered vent)
Jacket ports:
(6) 2″ NPT
Jacket MAWP: 100 PSI @ 350°F
Jacket External MAWP: FV PSI @ 350°F
Jacket MDMT: -20°F @ 100 / FV PSI
OAD: 77″ L x 77″ W x 130″ H
Ross, Model 42N-25S, 30 ft³ total (25 ft³ workable), 316 stainless steel, double ribbon mixer with amount of product per hour – depending on materials and application. Inner mixing chamber dimensions of: 60" in Length; 29" in Width; 33" in Depth. Equipped with flip up cover, flip cover has a 18" x 10" hatch and a 12" diameter open vent, 89" infeed height, 3½" OD mixing shaft with 28½" diameter x ½" thick stainless steel ribbons powered by 10 Hp variable speed drive, 4" diameter Tri-clamp center bottom discharge with slide gate valve and 50" ground clearance. Mounted on 45" high leg extensions.
OAD: 94"L x 48"W x 99"H
PSI-RP10SS SYS Powell Systems complete form, fill and seal bagging line. Bag size range: 6″ to 10″ in Width; 8″ to 14″ in length with proper change parts. Equipped with a dimpled vibratory feed hopper with 31″ long x 31″ wide x 16″ deep hopper, 10¾” wide x 27½” long bed with 4″ high side walls and 19″ discharge height. Bucket elevator with white plastic product buckets with inside dimensions of 15″ long x 4½” wide x 4″ deep, 36″ long horizontal floor run with a 17″ long load area, 18″ feed height, 124″ vertical lift with 18½” wide frame, 65″ overhead horizontal top run with 8″ diameter discharge funnel with a 123″ discharge height. 14 head combination scale capable of up to 140 weighs per minute from 14g to 2700g with an accuracy of ± 0.1grams. 8-station, pre-made pouch filler and sealer, equipped with 52″ long automatic (2) belt pre-made pouch magazine, reciprocating suction cup pic-n-place, 8 stations for pouch loading, hot stamp date coder, zipper open, bag open, bag filling, spare station, pouch heat sealing, pouch cooling and discharge, with 43″ long x 12″ wide discharge belt conveyor.
OAD: 182″ L x 84″ W x 143″ H
