Powell Systems, Model PSI-320, automatic, stainless steel, continuous motion, vertical form, fill, seal machine. Rated from 20 to 90 bags per minute – depending on materials, application and machine configuration. Bag size range: 2″ to 7″ in Width; 2″ to 8″ in length with proper change parts. Equipped with 9″ long vertical seal jaws, 8″ wide horizontal seal jaws, dual side film assist belts, film detection and tracking, registration film advance, and servo drive motors. Maximum film roll size: 12″ OD x 15″ Wide. Control panel has touch screen HMI controller with power on / off switch start and e-stop push buttons. Mounted on stainless steel base frame with interlocking Lexan guarding and leveling legs.
OAD: 49″L x 42″W x 48″H
Feldmeier, model EPC, 1,150 gallon total (1000 gallon working) capacity, stainless steel, scrape agitated, insulated and jacketed tank. Vessel dimensions: 72″ ID with a 60″ straight wall. Equipped with bridge mounted scrape agitation powered by a 5 Hp drive on a 3″ diameter shaft, top mounted 17″ diameter manway with flip up bolt down lid, no foam product entry mounted on a 3″ Tri-clamp fed by a 2″ Tri-clamp, thermowell, top mounted “N” shaped adjustable and removable baffle, bottom mounted instrumentation on a 2″ Tri-clamp, 3″ Tri-clamp discharge with 17½” ground clearance. Mounted on (4) legs.
Top ports:
(1) 3″ Tri-clamp (covered vent)
Jacket ports:
(6) 2″ NPT
Jacket MAWP: 100 PSI @ 350°F
Jacket External MAWP: FV PSI @ 350°F
Jacket MDMT: -20°F @ 100 / FV PSI
OAD: 77″ L x 77″ W x 130″ H
Ross, Model 42N-25S, 30 ft³ total (25 ft³ workable), 316 stainless steel, double ribbon mixer with amount of product per hour – depending on materials and application. Inner mixing chamber dimensions of: 60" in Length; 29" in Width; 33" in Depth. Equipped with flip up cover, flip cover has a 18" x 10" hatch and a 12" diameter open vent, 89" infeed height, 3½" OD mixing shaft with 28½" diameter x ½" thick stainless steel ribbons powered by 10 Hp variable speed drive, 4" diameter Tri-clamp center bottom discharge with slide gate valve and 50" ground clearance. Mounted on 45" high leg extensions.
OAD: 94"L x 48"W x 99"H
PSI-RP10SS SYS Powell Systems complete form, fill and seal bagging line. Bag size range: 6″ to 10″ in Width; 8″ to 14″ in length with proper change parts. Equipped with a dimpled vibratory feed hopper with 31″ long x 31″ wide x 16″ deep hopper, 10¾” wide x 27½” long bed with 4″ high side walls and 19″ discharge height. Bucket elevator with white plastic product buckets with inside dimensions of 15″ long x 4½” wide x 4″ deep, 36″ long horizontal floor run with a 17″ long load area, 18″ feed height, 124″ vertical lift with 18½” wide frame, 65″ overhead horizontal top run with 8″ diameter discharge funnel with a 123″ discharge height. 14 head combination scale capable of up to 140 weighs per minute from 14g to 2700g with an accuracy of ± 0.1grams. 8-station, pre-made pouch filler and sealer, equipped with 52″ long automatic (2) belt pre-made pouch magazine, reciprocating suction cup pic-n-place, 8 stations for pouch loading, hot stamp date coder, zipper open, bag open, bag filling, spare station, pouch heat sealing, pouch cooling and discharge, with 43″ long x 12″ wide discharge belt conveyor.
OAD: 182″ L x 84″ W x 143″ H
PSI-620 SYS Powell Systems complete form, fill and seal bagging line. Bag size range: 3.5″ to 11.8″ in Width; 2″ to 15.75″ in length with proper change parts. Equipped with a dimpled vibratory feed hopper with 31″ long x 31″ wide x 16″ deep hopper, 10¾” wide x 27½” long bed with 4″ high side walls and 19″ discharge height. Bucket elevator with white plastic product buckets with inside dimensions of 15″ long x 4½” wide x 4″ deep, 36″ long horizontal floor run with a 17″ long load area, 18″ feed height, 124″ vertical lift with 18½” wide frame, 65″ overhead horizontal top run with 8″ diameter discharge funnel with a 123″ discharge height. 14 head combination scale capable of up to 140 weighs per minute from 14g to 2700g with an accuracy of ± 0.1grams. Vertical bagger with 16″ long vertical seal jaws, 12″ wide horizontal seal jaws, dual side film assist belts, film detection and tracking, registration film advance, hot stamp coder and servo drive motors, maximum film roll size: 12″ OD x 24.4″ Wide. Cleated take away conveyor with 17¾” wide x 72″ long belt with 1¼” high x 14″ wide cleats set on 12″ centers with 12″ long horizontal run has 9″ in feed height, 60″ long incline section with 36″ discharge height and variable speed controller.
OAD: 182″ L x 84″ W x 143″ H
P E Labellers, Model Futura SL 576, 2 head front and back, glue, rotary labeler. Rated up to 180 containers per minute depending on materials, application and machine configuration. Label head spead: up to 90m/min. Label size: 35mm to 180mm high x 160mm to 420mm long. Equipped with a 3¼” wide conveyor through labeler, dual worm screw into star wheel indexing, 10 plate rotary table set on 9¼” centers, (2) M90 DX 200 label heads and star wheel discharge. Control panel has PLC with a touch screen HMI.
OAD: 125″L x 87″W x 106″H
PDC Intl. Corp., model KST80-712, 304 stainless steel, dual zone steam shrink tunnel and conveyor with self-contained steam generators and number of containers per minute – depending on materials and application. Total aperture: 7″ wide x 9¾” high. Equipped with 4½” wide x 187″ long through conveyor with an infeed and discharge range of 32″ to 36″ powered by a 1 Hp drive, (2) 7″ wide x 48″ long drip trays at infeed and discharge, removable guide rails with a maximum width of 5¼”, (2) zone 110″ long tunnel, (2) 40 Hp (30 Kw) steam generators, steam manifold with adjustable flow controls, steam vents with adjustable flow control connected to a 12″ diameter blower powered by a ½ Hp drive. Belt and blower controlled by devoted VFD , control panel with On/Off and touchpad HMI for heat control. Mounted on stainless steel frame.
OAD: 194″ L x 60″ W x 78″ H
Pacific Packaging, model SL-7408-M-WB, 8 head, inline, continuous motion, servo driven, mass flow meter filler. Rated up to 200 containers per minute – depending on materials, application and machine configuration. Container size range up to 4½” in diameter and 18″ in height. Equipped with a 4½” wide x 175″ long product conveyor with 33″ infeed and discharge height, 102″ long worm screw, (8) ½” diameter x 12″ long bottom up fill nozzles, (8) Endress + Hauser Dosimass coriolis mass flow meters, 42″ long nozzle bank on walking beam with 43″ of travel, reciprocating drip tray, 40 gallon product supply tank, SPX model 040-U1positive displacement pump powered by a 3 Hp drive, No bottle/No Fill, and Seko gauges. Control panel with AB PLC and touch screen HMI. Mounted on stainless steel frame with leveling feet and lexan guarding.
OAD: 178″ L x 81″ W x 94″ H
Jones, Model Alterion CL-170, automatic, horizontal, continuous motion, hot melt glue cartoner, rated from 40 to 170 cartons per minute – depending on materials and application. Carton size range: 5″ to 10″ in Length; 1″ to 6.5″ in Width 4.25″ to 14″ in Depth. Equipped with (4) adjustable chains set on 12″ centers. 127″ long hand load area, 72″ long automatic blank carton magazine, rotary pic n place carton feeder with pre-break and top squaring device, Nordson Problue hot melt glue system, digital Siko adjustment gauges, no product / no carton and no carton / no load sensors, major and minor flap closers, vacuum pump. Control panel has PLC controller and touch screen HMI.
OAD: 573″ L x 88″ W x 104″ H
Texwrap, Model DX-130, inline, intermittent motion, bundler and integrated shrink tunnel rated up to 25 bundles per minute – depending on materials and application. Equipped with in feed conveyor, hot impulse seal jaw, side mounted film racks and splice station, with film rolls up to 30″ in width; and 14″ OD on 3″ core. transfer conveyor into single zone shrink tunnel.
