Doering, Model 3PFL, 304 stainless steel, variable speed, twin screw pump feeding system. Product viscosity: up to 1,000,000 CPS. Rates dependent on materials, application and machine configuration. Pump rates of between 11.1 GPM to 54.9 GPM depending on RPM. Equipped with a stainless steel product hopper (Hopper dimensions: Top 30½" x 21"; Bottom 20½" x 11"; 5½" Deep) with an infeed height of 72", (2) 5½" diameter x 25" long stainless steel feeding screws and transition rotors powered by a common 1½ hp drive with variable speed gearbox. Discharge is through a 1½ hp lobe pump with a variable speed gerarbox with a 3" ID seated bevel port with 54¾" discharge height. Mounted on stainless steel frame with locking casters.
OAD: 74"L x 59"W x 72"H
Kent, model 4" x 8", 3 roll, piped, variable speed, roller mill. Roll dimensions: 4" diameter x 8" long. Estimated production rate of between 1 and 5 gallons per hour. Equipped with 1½ hp drive, lift up safety grate, 8" wide apron with a 2" wide discharge, 15" long x 10" wide under roller tray. Control panel with AB PLC and touchscreen HMI. Mounted on portable base with castors.
Roller Fittings:
(1) 1" NPT
(1) ½" NPT
OAD: 40" L x 24" W x 68" H
Cornell, Model D16, 304 stainless steel, Versator and vacuum pump. Rated from 1 to 20 gallons of product per minute – depending on materials and application. Equipped with 16" ID product rotating disc, 1" Tri-clamp infeed, 1½" Tri-clamp discharge, 2" Tri-clamp vacuum port. Boltdown door has 4" OD sight port. Versator powered by 7½ Hp, vacuum pump powered by 7½ hp drive. Mounted on portable base with castors.
OAD: 71"L x 61"W x 70"H
Mokon, model Full Range 311349, heater. Temperature range of up to 250°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 18kW heater, 2 hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittings are 2" ID 5" OD flange.
OAD: 82"L x 40"W x 66"H
Pacific Packaging, model V-16-B-22.000, 16 head, 316 stainless steel, rotary, volumetric filler rated between 30 and 360 CPM – depending on materials, application and machine configuration. Fill size range: From 8 oz to 128 oz. Equipped with 96" long x 4½" wide through container conveyor with 24" long worm screw to star wheel indexing, SPX model 060U2 pump, bottom up filling and (16) 0.87" ID / 1.25" OD nozzles set on 4¼" centers. Control panel with A/B PLC controller and touch screen HMI controls on swing arm. Mounted on heavy duty stainless steel frame.
OAD: 96"L x 66"W x 102"H
Jones, model CMV, semi-automatic, continuous motion, vertical, tuck cartoner rated up top 120 cartons per minute – depending on materials, application, machine configuration and operator dexterity. Carton size range: 1" to 4¼" in Length; ¾" to 4¼" in Width; 2½" to 9" in Depth. Equipped with 3 chains with adjustable lugs set on 5" centers, 30" long carton magazine, reciprocating carton pick-n-place, 11" long x 4½" wide bottom compression belt, (2) 105" long product load zones, 11" long x 4½" wide top compression belt, 56" long x 4½" wide discharge conveyor with a discharge height of 32".
OAD: 252" L x 69" W x 80" H
Emboss coder available for additional cost
Pacific Packaging, model 10V00, 10 head, 316 stainless steel, rotary, volumetric filler rated between 30 and 360 CPM – depending on materials, application and machine configuration. Fill size range: From 8 oz to 128 oz. Equipped with 184" x 4½" wide through container conveyor with 24" long worm screw to star wheel indexing, 16" diameter x 19½" straight wall product hopper, Waukesha model 130 pump, and (10) 0.87" ID positive cut off fill nozzles set on 8" centers. Control panel with A/B PLC controller and touch screen HMI controls on swing arm. Mounted on heavy duty 304 stainless steel frame.
OAD: 184"L x 68"W x 83"H
US bottlers, model PGE-60, automatic, 60 head, stainless steel, rotary, gravity / overflow filler. Bottles per minute – depending on materials, application, size container and fill. Container size range: up to 3" in diameter, 4" to 12½" in height, capable of handling glass, plastic and metal containers with proper change parts. Equipped with 96" long x 4½" wide belt through conveyor, 36" long worm screw to star wheel indexing, 75" OD turret with 60 filling stations with ¾" OD nozzles set on 3¼" centers.
OAD: 109"L x 96"W x 95"H
Fitzmill, Model L1A, lab size stainless steel reduction hammer mill. Equipped with fixed knife / impact hammers, 4" diameter product funnel with a 1" diameter gravity feed throat, 4½"OD tri-clamp discharge, product containment system and touch pad controls with e-stop and frequency speed controls from 300 to 9000 rpm. Screens required per application.
OAD: 20"L x 12"W x 21"H
Breddo, Model LOR, 200 gallon, 316 stainless steel, single wall liquefier. Chamber dimensions: 50" diameter with a 25" straight wall. Equipped with 24" diameter top man way with flip up bolt down cover, CIP spray ball fed by a 1½" Tri-clamp, 12" daimeter bottom 6 hole / 3 wing / high shear impeller, 3" tri-clamp side bottom discharge with 18½" floor clearence, side 40 Hp motor drive and mounted on stainless steel (6) leg tubular frame.
Top Ports:
(1) 3" Tri-Clamp
(2) 2" Tri-Clamp
OAD: 79" L x 55" W x 85" H
Ishida, model DACS-GN-S015-22/SS-I-S, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 9½" in Length; 9½" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 9½" long x 9½" wide neoprene weighing conveyor with load cell, 21½" long by 10" wide neoprene discharge conveyor with push arm reject. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
Patterson Kelley, model 3 ft³, 304 stainless steel, jacketed, vacuum, twin shell mixer. Rated up to 100 lb/ft³. Equipped with (2) 16" boltdown manways, (2) 27" long side V-walls, (2) 12" long inner V-walls, (2) 16" diameter mixing chambers, 6" butterfly valve discharge with 27" ground clearance, liquid/solids bar powered by a 2 hp drive, shell rotation powered by a ¾ hp drive with variable speed gearbox. Requires 81" ceiling clearance with a 27" swing radius / 54" swing diameter and 54" high swing axis.
Jacket ports:
(2) 1" NP
Nat’l Brd: 51987
MAWP(vessel): Full Vac PSI @ 250°F
MAWP (Jacket): 30 PSI @ 250°F
OAD: 84" L x 48" W x 70" H
