Product
Anritsu, Model M6, automatic, inline, metal detector with number of product per minute – depending on materials and application. Working Aperture: 7" in Height; 11½" in Width. Equipped with 10" wide x 31" long product conveyor with stop belt reject. Sensitivities: depending on product, container and environment being run in. Mounted on (4) adjustable leg base frame.
OAD: 32" L x 26" W x 51" H
OrangeWorks, 20,000 lbs, 292 ft³, 304 stainless, horizontal, jacketed, chocolate melting and mixing tank, with pounds of product per hour – depending on materials and application. Inner chamber dimensions: 68" diameter x 139" long. Equipped with 24" boltdown manway, 4" diameter center shaft powered by a 10 hp drive, (4) 33" long x 6" wide paddles, front mounted 4" Tri-clamp discharge with butterfly valve and 12" ground clearance, rear mounted 4" Tri-clamp discharge with butterfly valve and 14" ground clearance, 1" ID / 4¼" OD flange with sample valve and drip tray, flush mounted sensor.
Top Ports:
(4) 4½" ID / 9" OD Flange
(1) 4" Tri-clamp
(5) 2" Tri-clamp
Jacket Ports:
(1) 1" ID 4¼" / OD Flange
(3) ¾" ID / 4" OD Flange
MAWP: 149 PSI
OAD: 175" L x 75" W x 90" H
Sollich, Model TT 6400HD, 12 plate, chocolate tempering system. Rated up to 6400 kg (14109 Lbs) per hour – depending on materials, application and machine configuration. Equipped with (12) plate tempering chamber, water jacketed, scrape surface agitated zones, top and side 4½"OD / 4"ID Tri-clamp product ports and modular water flow system. Control panel with A/B controller and A/B PanelView controls. Mounted on (4) leg stainless steel base frame.
OAD: 85" L x 75" W x 116" H
MGS, Model TLC, automatic, intermittent, top load auto cartoner and packer with hot melt glue sealer. Rated up to 40 CPM – depending on materials and application. Tray size range: 2" to 9" in Length; 1¾" to 6" in Width; 2" to 8" in Height. Equipped with 32" long blank tray magazine, (2) 6 suction cup vacuum blank pic n place, single tray forming head, Nordson hot glue melt system, 156" long (2) chain lugged tray conveyor set on 12" centers running through glue systems, (4) 4¼" Long x 1¼" wide x ½" deep 6 pocket shuffle bucket indexing on 68" dual belt conveyor, quick change tooling. Single head, 2 Axis robotic product pick n place, leaflet feeder. Control panel has AB PLC with touchscreen HMI. Mounted on leveling legs with kleen top design safety guarding.
OAD: 228" L x 108" W x 87" H
Optional date coder available for additional cost.
Latini, model MPS 2/42, 304 stainless steel, coating pan station with working volumes per hour – depending on materials and application. Equipped with (2) 42" diameter x 38" deep apple shaped coating bowls, each bowl has a 24" diameter access port with an infeed height of 39", powered by (2) 1½ hp drives. Mounted on painted frame.
OAD: 93" L x 75" W x 72" H
Latini, model MPS 2/42, 304 stainless steel, coating pan station with working volumes per hour – depending on materials and application. Equipped with (2) 42" diameter x 38" deep apple shaped coating bowls, each bowl has a 24" diameter access port with an infeed height of 39", powered by (2) 1½ hp drives. Mounted on painted frame.
OAD: 93" L x 75" W x 72" H
Holloway America, 20 Liter, 5.2 gallon, 316L stainless steel, internal vacuum, insulated jacket, process tank. Vessel dimensions: 12" ID with a 18" straight wall. Equipped with bolt down lid, (1) thermowell, 1" Tri-clamp discharge with 23" ground clearance. Mounted on portable cart with castors.
Top Ports:
(1) 3" Tri-clamp
(1) 2" Tri-clamp
(4) 1½" Tri-clamp
(1) 1" Tri-clamp
Jacket ports:
(3) 1" Tri-clamp
Vessel:
MAWP: 50 PSI @ 300°F
MAEWP: 15 PSI @ 300°F
MDMT: -20°F @ 50 PSI
Jacket:
MAWP: 150 PSI @ 300°F
MAEWP: 15 PSI @ 300°F
MDMT: -20°F @ 150 PSI
Nat’l Brd: 3303
OAD: 45" L x 30" W x 55" H
Egan Food Technologies, model Slabform Duo, 304 stainless steel, slab former and guillotine. Rated up to 100 bars per minute (based on standard bar size of 3.5" x 1.25"). Equipped with (2) sets of (2) 10" diameter x 3" wide top compression rollers with a height range of 0" to 3¾" for both sets of rollers with hand crank adjustment, each set of rollers is powered by a 0.125 hp drive, each roller set has (3) adjustable laner blocks, each block is 20" long x 2" wide x 2½" high, 14" wide x 97" long neoprene conveyor with an infeed height of 41" goes through compression rollers and enters guillotine chamber powered by a ¼ hp drive, guillotine chamber has a 2" high x 14" wide aperture, 14" long guillotine powered by a 2½ hp drive, 14" wide x 35" long neoprene discharge conveyor with a discharge height of 41" powered by a 0.125 hp drive. Mounted on a stainless steel frame.
OAD: 132"L x 46"W x 71"
Latini, model MPS 2/42, 304 stainless steel, coating pan station with working volumes per hour – depending on materials and application. Equipped with (2) 42" diameter x 38" deep apple shaped coating bowls, each bowl has a 24" diameter access port with an infeed height of 39", powered by (2) 1½ hp drives. Mounted on painted frame.
OAD: 93" L x 75" W x 72" H
Latini, model MPS 2/42, 304 stainless steel, coating pan station with working volumes per hour – depending on materials and application. Equipped with (2) 42" diameter x 38" deep apple shaped coating bowls, each bowl has a 24" diameter access port with an infeed height of 39", powered by (2) 1½ hp drives. Mounted on painted frame.
OAD: 93" L x 75" W x 72" H
10 gallon, 316 stainless steel, low pressure jacket, process tank. Vessel dimensions: 14" ID x 16½" total depth with a 14" straight wall. Equipped with bolt down lid, magnetic prop agitation powered by a .33 hp drive, 1" Tri-clamp discharge with 30½" ground clearance. Mounted on stainless steel frame with locking castors.
Top Ports:
(1) 2" Tri-clamp
(1) 1½" Tri-clamp
(1) 1" Tri-clamp
Jacket Fittings:
(2) 1" NPT
OAD: 35" L x 28" W x 59" H
Holloway America, 20 Liter, 5.2 gallon, 316L stainless steel, internal vacuum, insulated jacket, process tank. Vessel dimensions: 12" ID with a 18" straight wall. Equipped with bolt down lid, (1) thermowell, 1" Tri-clamp discharge with 23" ground clearance. Mounted on portable cart with castors.
Top Ports:
(1) 3" Tri-clamp
(1) 2" Tri-clamp
(4) 1½" Tri-clamp
(1) 1" Tri-clamp
Jacket ports:
(3) 1" Tri-clamp
Vessel:
MAWP: 50 PSI @ 300°F
MAEWP: 15 PSI @ 300°F
MDMT: -20°F @ 50 PSI
Jacket:
MAWP: 150 PSI @ 300°F
MAEWP: 15 PSI @ 300°F
MDMT: -20°F @ 150 PSI
Nat’l Brd: 3307
OAD: 45" L x 30" W x 55" H