Arpac Model TS37 / XT18, continuous motion, side seal shrink wrapper and tunnel. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with lugged product in feed conveyor, next generation side seal and film registration. Additionally features A/B controller, no product detection, perf and scrap removal wheels, temperature controllers, E-stop and interlock safety guarding. Film specs: up to 39" wide Single Wound film; 3" core; to 14" OD. Speeds dependent on materials, application and machine configuration.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, with illuminated shrink chamber and chamber viewing window. top mounted blower with variable speed and temperature controls. Mounted on height adjustable legs.
OAD: 251" L x 63" W x 61" H
Arpac, Model XT18, Convection shrink tunnel with number of product per minute and hour – depending on materials and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat chamber, 86" long x 17¼" wide product conveyor. Has illuminated shrink chamber with viewing window and top mounted blowers. Swivel head control panel with variable speed temperature and air velocity controls. Mounted on frame with casters and leveling legs.
OAD: 88" L x 45" W x 65" H
Stein, Heritage model, breader for applying flour and fine granular free flowing coating materials. Equipped with a 36" wide x 36" long product in feed conveyor belt with 27" wide top applicator and bottom breading reservoir to cover belt and fully coat product, 30" wide x 35" long stainless steel wire product discharge belt with hooded 3 hp blower for excess breading removal. Coating material is transferred from filling station to top applicator by a 7½" diameter x 65" long stainless steel screw conveyor and further transferred to bottom station with a 3" diameter x 28" long stainless screw conveyor. Unused breading from conveyor belt is returned to the filling station by a 6½" diameter x 50" long stainless steel screw conveyor. Mounted on stainless steel base frame with casters.
OAD: 86" L x 62" W x 86"H
Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 22" in Length; 6" to 15½" in Width; 5" to 15¾" in Height. Equipped with Belcor Model 505 manual case erector top case packer and Model 252 top and bottom case taper with side snap flap folders, 58" long x 3" wide side case transfer belts, top and bottom 2" tape heads, hand crank height and width adjustable. Control panel with start, stop, e-stop push button controls. Mounted on (4) leg height adjustable frame.
OAD: 103" L x 35"W x 65" H
Loma, Model IQ4, Automatic, inline, stainless steel, metal detector with number of product per minute – depending on materials and application. Working Aperture: 6" in Height; 17" in Width. Equipped with 15¾" wide x 70" long Intralox product conveyor with push arm reject and variable speed controls. Sensitivities: depending on product, container and environment being run in. Temperature range: -10 to +40 Deg C, 14 to 104 Deg F. Ethernet and USB capable. Touch pad controls with display. Mounted on (4) leg base frame.
OAD: 72"L x 56"W x 49"H
Fischbein Model DRC 500, right to left, double roll glue bag sealer. Rated from 0 to 110 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Minimum bag face width: 5". Minimum bag free top: 6". Filled bag weight from 1 lbs to 50 lbs, will run most gusseted and flat bags. Equipped with bag trimmer, single fold before glue application, second final fold and Nordson hot melt system. Mounted above a 12" wide x 170" long belt conveyor.
OAD: 170"L x 56"W x 68"H
Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel – speed dependent on materials, application and machie configuration. Equipped with 70" long x 24" wide in feed conveyor, 29" wide seal jaw with 12" vertical travel, side mounted film racks and splice station, 66" long x 17" wide transfer conveyor through seal and into single zone shrink tunnel with 29" wide flex link conveyor and 28” in width x 16" in height aperture and 70" long chamber, top mounted blower motor and cooling blower at discharge. Allen-Bradley controller with PanelView operator interface and color touch screen, message display and self-diagnostics, low film alert, bypass mode – allows product to pass through the machine without being wrapped and without heating the tunnel. Film rolls up to 28" in width; and 14" OD on 6" core. Mounted on heavy duty frame with status light bar and interlocked safety guarding.
OAD: 262"L x 80"W x 88"H
PE USA, Model Modular SL, 2 head front and back, pressure sensative, rotary labeler. Rated up to 250 containers per minutre depending on materials, application and machine configuration. Label head spead: up to 90m/min. Reel size: up to 355mm diameter x 200mm high. Label size from 15mm to 480mm long. Equipped with a 3¼" wide conveyor through labeler, dual worm screw into star wheel indexing, 6 plate rotary table set on 11½" centers, (2) M60 SX 200 label heads and star wheel discharge. Control panel has PLC with a touch screen HMI.
OAD: 187"L x 112"W x 102"H
PE USA, Model Modular SL768-10-4P, 2 head front and back, pressure sensitive, rotary labeler. Rated up to 250 containers per minutre depending on materials, application and machine configuration. Label head spead: up to 90m/min. Reel size: up to 355mm diameter x 200mm high. Label size from 15mm to 480mm long. Equipped with a 3¼" wide conveyor through labeler, dual worm screw into star wheel indexing, 10 plate rotary table set on 9¼" centers, (2) M90 DX 200 label heads and star wheel discharge. Control panel has PLC with a touch screen HMI.
OAD: 262"L x 130"W x 104"H
Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped with stainless steel wire mesh product conveyor belt thru the enrober, star pump, stainless steel product tank, chocolate reservoir and pressure pipe circulation. Feed system also feeds bottom section with separate pipe which enables total control of the bottom wave. Blower adjustment for volume or speed of air and angle of flow, along with vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. The control panel has a touch pad controller with readout, chocolate pump, room heat with water temperature controllers, belt and stirrer on / off, forward / reverse switches, start, stop and e-stop push buttons. Mounted on stainless steel frame with height adjustable legs.
Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped with stainless steel wire mesh product conveyor belt thru the enrober, star pump, stainless steel product tank, chocolate reservoir and pressure pipe circulation. Feed system also feeds bottom section with separate pipe which enables total control of the bottom wave. Blower adjustment for volume or speed of air and angle of flow, along with vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. The control panel has a touch pad controller with readout, chocolate pump, room heat with water temperature controllers, belt and stirrer on / off, forward / reverse switches, start, stop and e-stop push buttons. Mounted on stainless steel frame with height adjustable legs.
Morcos stainless steel skid mounted melt tank and tempering system with self contained heating system.
Model AWK 1000, 2200 lb., stainless steel , jacketed, self-contained chocolate melt tank, with pounds of product per hour – depending on materials and application. Full jacket, with self-contained heater with side and top temperature sensor. Slant bottom discharge to transfer pump.
Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the jacketed pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.
OAD: 128"L x 64"W x 102"H
