INSITE, Model E30G, automatic, case erector, bottom hot melt glue sealer. Rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 9" to 18" in Length; 5½" to 16" in Width; 6" to 16" in Height. Equipped with servo driven case erecting arm, Nordson hot melt glue system and 45" long x 3" wide dual side belt discharge section with adjustable from 25" to 28" discharge heights. Control panel has PLC controller with panel view touch screen HMI, e-stop and status light bar.
OAD: 115"L x 60"W x 97"H
Patterson Kelley, Model 3 ft³, 304 stainless steel low pressure jacketed twin shell mixer. Equipped with (2) 16" ID product ports, 26" long outer V-Walls and 12" long inner V-Walls and 6"ID discharge with 37" ground clearance. Shell powered by a ¾ Hp motor drive. Requires 81" ceiling clearance with a 27" swing radius / 54" swing diameter. Mounted on painted base frame.
Jacket Access: (2) ¾" NPT
OAD: 83"L x 48"W x 70"H
Stokes, 48" stainless steel, angular shaped, coating pan. Pounds of product per hour – depending on materials, application and operator dexterity. Equipped with 48" diameter x 36" deep coating bowl, 25" diameter product access port with 46" ground clearance and powered by a 2 Hp drive. Mounted on painted base frame.
OAD: 64"L x 48"W x 70"H
Cozzini, Model CBD3080-610, 304 stainless steel construction tote / vat dumper. Equipped with 48" wide x 44" long x 55" high tote chamber. Powered by 3 hp hydraulic pack with push button start / stop for pump and raise / lower for dumper. Requires 183" high ceiling clearance and discharges at a height of 80" at a 45° discharge angle with maximum capacity of 3,000 lbs
OAD: 55"L x 67"W x 104"H (in down position)
Combi, Model TBS-100 FC-XL, automatic, uniform, top flap closer, top and bottom case tape sealer. Rated from 10 to 20 cases per minute – depending on materials, and application. Case size range: 8" to 24" in Length; 6" to 16" in Width; 5" to 18" in Height. Equipped with 72" long x 2-1/4" wide dual side belt case assit conveyors, automatic top flap closer, major / minor flap plows, 2" top and bottom tape heads, hand crank adjustable with interlock lexan safety guarding doors. Control panel has push button start / stop / reset and e-stop push button controls. Mounted on (4) leg height adjustable frame.
OAD: 84" L x 58" W x 69" H
Arpac, Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel. Rated from 0 to 90 linear feet or 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3½" to 60" in Length; 2" to 16" in Width; ¼" to 7½" in Height. Equipped with 112" long lugged product in feed conveyor with lugs set on 15" centers, LDPE seal jaws with next generation side seal with film registration and product discharge conveyor. Film specs: up to 39" wide single wound film on 3" OD core; to 14" OD with pull out film carriage. Control panel has A/B controller, with no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Mounted on (4) leg base frame with interlock safety guarding.
Shrink tunnel: Aperture: 21" in Width; 12" in Height; tunnel 72" in Length. Equipped with 87" long x 18" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg base frame.
OAD: 301"L x 65"W x 68"H
Delkor Model 752, Automatic, dual head, tray former rated up to 150 trays per minte – depending on materials and application. Right to left machine can an handle a varity of size ranges – depending on materials and application. Capable of handling both regular trays to tri-seals.and flat blanks up to (22" W x 30" L) and will form chipboard, corrugated, or poly coated materials.(with proper change parts). Currently set for chipboard tray (8" L x 5-1/2" W x 1 1/4" H). Equipped with dual (30" L x 6"W) powered tray feed magazine, with (2) suction cup vacuum pick-in-place, Nordson IV (4) gun hot melt glue system, (6′ L x 8 1/2" W) product conveyor and Allen bradly controls. Last running in a snack food operation.
OAD: 114"L x 65"W x 78"H
Automatic snap capper capable of 20 to 200 containers per minute. Equipped with 3-1/4" conveyor, cap hopper, pin wheel sorter, air assist cap chute and star wheel container handling components.
OAD = 108" L x 40" W x 96" H
Stainless steel, 3 head rotary capper capable of speeds from 40 up to 105 cpm. Cap range from 15-63mm. Container size range: dia of 85mm (3-3/8) & max ht of 250 (10"). Equipped with screw in feed to star wheel, 3-1/2” wide conveyor with variable speed controls. Screw feed left to right product flow. Available at an additional cost model ECT cap feeder /hopper, 8” (W) x 2 1/2” (H) cleated cap elevator set on 5” centers.
Delkor 752, Automatic, dual head, tray former rated from 60 to 150 trays per minute – depending on materials and application. Blank Tray size: up to 22" in Length; up to 30" in Width. Equipped with two 24" long blank tray magazine, two 2 head vacuum reciprocating pick and places, two shuttle indexing systems, two ram plungers, two tray forming stations, Nordson hot melt glue system, Lexan safety guarding, and push button controls. Mounted on height adjustable legs.
OAD: 106"L x 63"W x 81"H
SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. Equipped with 120" long x 4-1/2" wide stainless steel container conveyor, 21" long x 25" wide x 18" deep (4 ft³) cap hopper, 77" long x 6" wide elevator with 2½" high cleats on 6" centers, 46" long x 5½" wide cap feeding / sorting belt, adjustable cap chute, with 24" long x 1" wide single container gripper belts, (3) hand crank adjustable (6) spindle stations (2) sets of mechanical clutches for increased torque control. Control panel with spindle and gripper control dials, start and e-stop buttons. Mounted on heavy duty stainless steel frame with casters.
OAD: 120" L x 40" W x 63" H
E Pak, Automatic, inline, stainless steel, feeder, spindle capper, conveyor and cap inspection. Rated from 10 to 90 containers per minute – depending on materials, application and machine configuration. Cap size range: 32mm to 130mm in Diameter. Equipped with a waterfall style cap sorter with a 47" long x 37" wide x 22" deep hopper and 9" wide belt with 3/8" high cleats set on 2" centers, adjustable cap chute, 4½" wide x 240" long Delrin belt, 32" long double container gripper belts, 4 station / 8 spindle capper and cap inspection with reject to identify missing, crooked or high caps. Control panel has push button start / stop controls and variable speed controls. Mounted on heavy duty base frame.
OAD: 240"L x 57"W x 71"H (Capper)
50"L x 46"W x 105"H (Feeder)
