Serpa, Model 2000WA, Automatic, continuous motion, stainless steel, wrap around hot melt glue cartoner rated up to 300 cartons per minute – depending on materials and application. single chain unit set on 12" centers with a carton size range of: 1" to 9" in Length; 1 to 3½" in Width; 5" to 9" in Depth. Equipped with 2½" wide x 84" long product in feed conveyor, 48" long powered blank carton magazine, (2) head rotary pic-n-place, 48" dual worm screw infeed, fixed overhead lugged product assembly with wrap plow closers and lugged side chain indexing conveyor, Nordson hot melt glue system, 36" long product discharge side belt conveyor and full access doors for ease in maintenance. Control panel has AB controller with touch screen HMI and light stack.
OAD: 277"L x 64"W x 98"H
Smalley, stainless steel inclined belt conveyor. Equipped with a 12" wide x 280" long food grade blue belt with an infeed height of 37" to 42" and discharge height of 71" to 78". Mounted on locking casters.
OAD: 280"L x 36"W x 76"H
Fitzpatrick, Model JT, 316 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with 12" ID x 3" deep 304 stainless steel feed pan with 2.75" ID product port, (12) swinging knife / impact blades with screen area of 2" wide x 16" long and 8" long x 2" wide bottom product discharge with 35” ground clearance. Push button start /stop controls and mounted on a base with locking casters.
OAD: 35"L x 32"W x 55"H
Morcos Machinery Model RM1000, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 1000 Litres, (35.31 ft³) with minimum mixing capacity of 441 litres (14.51 ft³) and maximum mixing capacity of 833 litres (29.41 ft³). Mixing chamber dimensions: 70" in Length; 34" in Width; 33" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 8" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 2" wide x (1/8)" thick (outer) and 2" wide x (1/8)" thick (inner) stainless steel ribbons (2) levels spirals, (1) internal anticlockwise and (1) external clockwise spiral.powered by 7.3 Hp motor drive. 10 OD center bottom pneumatic discharge gate with 24 ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
Also granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).
OAD: 100" L x 34" W x 782" H
Bosch, Model PACK 102, 2-up, stainless steel, horizontal wrapper with number of packages per minute – depending on materials and application. Product size range: 3" to 9" in Length; 1/2" to 9-3/4" in Width; up to 3-3/4" in Height. Equipped with 72" long lugged product load area, with pop out lugs, adjustable former, 2-up 10-1/2" wide by 3/4" thick serrated knife seal jaws, (2) sets of fin seal wheels (1- heated / 1- cold), film registration and safety guarding. Web specifications up to 26" in width; up to 15.7" OD; on 3" OD core. Control panel has touch pad controller with upper and lower jaw temperature controllers with start, stop and e-stop push buttons. Mounted on stainless steel frame with casters and height adjustable leveling legs.
OAD: 183" L x 52" W x 76" H
E-Pak, 4 head, inline, stainless steel (316 contact, 304 non-contact) gear pump filler. Equipped with 149" long x 4.5" wide Delrin conveyor, bimba indexing system, four gear pumps, four 5/8" OD diving nozzles with positive cut off and product reservoir with float recovery system. safety guarding, A/B PLC with Panel View, NEMA 12 electrics with Ethernet port. Mounted on leveling legs. Rates dependent on materials, application and machine configuration.
OAD: 149" L x 75" W x 75" H Filler
36" L x 18" W x 75" H Control Panel
Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped stainless steel wire mesh product conveyor belt thru the enrober, with star pump, stainless steel product tank, chocolate reservoir, pressure pipe circulation and feed system that also feeds bottom section with separate pipe which enables total control of the bottom wave and blowers adjustments for volume or speed of air and angle of flow. vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. Control panel has touch pad controller with readout and room heat and water temperature controllers, belt and stirrer on / off, chocolate pump, forward and reverse switches, with start, stop and e-stop push buttons. Mounted on heavy duty base frame with height adjustable legs.
Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped stainless steel wire mesh product conveyor belt thru the enrober, with star pump, stainless steel product tank, chocolate reservoir, pressure pipe circulation and feed system that also feeds bottom section with separate pipe which enables total control of the bottom wave and blowers adjustments for volume or speed of air and angle of flow. vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. Control panel has touch pad controller with readout and room heat and water temperature controllers, belt and stirrer on / off, chocolate pump, forward and reverse switches, with start, stop and e-stop push buttons. Mounted on heavy duty base frame with height adjustable legs.
Morcos stainless steel skid mounted melt tank, tempering system with self contained heating system.
Model AWK 1000, 2200 lb, stainless steel , jacketed, self contained chocolate melt tank, with pounds of product per hour – depending on materails and application. Full jacket, with self contained heater with side and top tempature probes and side tempature gauge. Dish bottom has flanged center bottom discharge. Mounted on (4) stainless steel legs.
Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the JK pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.
Morcos stainless steel skid mounted melt tank, tempering system with self contained heating system.
Model AWK 1000, 2200 lb, stainless steel , jacketed, self contained chocolate melt tank, with pounds of product per hour – depending on materails and application. Full jacket, with self contained heater with side and top tempature probes and side tempature gauge. Dish bottom has flanged center bottom discharge. Mounted on (4) stainless steel legs.
Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the JK pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.
Arpac, Model XT18, Convection shrink tunnel with number of product per minute / hour – depending on material and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat chamber, 86" long x 17¼" wide composit conveyor, illuminated shrink chamber and viewing window and blowers. Swivel control panel with variable speed temperature and air velocity controls. Mounted on base frame with casters and leveling legs.
OAD: 88"L x 45"W x 65"H
Tronics Model S30, stainless steel, open frame, stepper driven, pressure sensitive, wrap labeler rated from 100" to 1,200" per minute with number of labels and containers – depending on materials and application. Label size range up to: 10" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement and containers from 5ml vials to 10 gallon containers (with proper change parts). Equipped with 4" wide x 120" long plastic Delrin product in feed conveyor with 32" in feed / discharge height, spacing wheel indexing, adjustable guide rails, no container / no label, single label head with 9-1/2" high peeler plate and 6" high side" 21" long x wrap belt, 13" OD label reel on 1-1/2" OD core and unit is hand crank adjustable. Control panel has touch pad controls with read out and has up to 100 job memory with e-stop. Mounted on stainless steel frame with casters and leveling legs.
OAD: 120" L x 54" W x 56" H
