Product
Stainless steel, Curved 90°, 9-7/8" wide x 126" long, Intralox conveyor. Product travels 70" into a 90° curve then travels another 56" before discharging. Equipped with 34" to 40" infeed / discharge range. Powered by a 1 hp drive and mounted on (6) legs.
OAD: 100"L x 90"W x 65"H
Hughes, Model 16×48, rotary, blancher, with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Equipped with 48" OD x 187" Long perforated drum powered by a 3 HP drive, 16" diameter charge and 16" diameter end discharge with 46" discharge height. Mounted on heavy duty stainless steel base frame.
OAD: 242"L x 82"W x 90"H
DCI, 6000 gallon, 304 stainless steel insulated horizontal tank. Vessel Dimensions: 85" diameter x 243" straight wall with dish ends. Equipped with a 20" x 16" front end man way with flip open cover, (2) ¾ Hp top mounted prop style mixers, CIP spray balls, thermowell and a 3" OD / 2½" ID Tri-clamp style discharge fitting with 12" ground clearance.
Front Ports:
(1) 3½"OD / 3" ID Tri-clamp
(1) 3" Diameter Open Vent
OAD: 270"L x 94"W x 121"H
DCI, 4,000 Gallon, 304 stainless steel, horizontal single wall tank. Vessel Dimensions: 78¼" diameter x 200" deep with a 192" straight wall. Equipped with 16" x 20" diameter side bottom bolt down man way, 3½"OD / 3"ID Tri-clamp fitting infeed and 3½"OD / 3"ID Tri-clamp fitting discharge with 7" ground clearance.
Top Access:
(1) 3½" NPT
(1) 4½"OD / 4"ID Tri-Clamp
Side Access:
(1) 5"OD / 4½"ID Tri-Clamp
(1) 2"ID Flare Out
OAD: 124"L x 80"W x 100"H
DCI, 4,000 Gallon, 304 stainless steel, horizontal single wall tank. Vessel Dimensions: 78¼" diameter x 200" deep with a 192" straight wall. Equipped with 16" x 20" diameter side bottom bolt down man way, 3½"OD / 3"ID Tri-clamp fitting infeed and 3½"OD / 3"ID Tri-clamp fitting discharge with 7" ground clearance.
Top Access:
(2) 3½" NPT
(1) 4½"OD / 4"ID Tri-Clamp
Side Access:
(1) 5"OD / 4½"ID Tri-Clamp
(1) 2"ID Flare Out
OAD: 124"L x 80"W x 100"H
Mueller, 4,000 Gallon, 304 stainless steel, single wall tank. Vessel Dimensions: 92" diameter x 160" deep with a 128" straight wall. Equipped with dome top, sight glass, 3½"OD / 3"ID Tri-Clamp infeed, 16" x 20" side bolt down manway with 1"OD / ½"ID Tri-Clamp opening on door and 2½"OD / 2"ID Tri-clamp fitting discharge with 18" ground clearance.
Top Access:
(1) 7"OD / 4"ID Flanged
(1) 3½"OD / 3"ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp
OAD: 105"L x 110"W x 178"H
Lyco, 36" wide, stationary-screen dewatering separator. Unit rated up to 375 GPM depending on materials, application, environment and machine configuration. Equipped with a 5"OD/4"ID I-Line style product feed, 36" wide x 11" long x 30" deep resivoir with (2) 2½"OD/2"ID tri-clamp style drains, 36" wide x 28" long screen with .080" gaps, and (1) 5"OD/4"ID I-Line style water discharge.
OAD: 60"L x 43"W x 50"H
Fitzmill, Model L1A, lab size stainless steel reduction hammer mill. Equipped with fixed knife / impact hammers, 4" diameter product funnel with a 1" diameter gravity feed throat, 4½"OD tri-clamp discharge, product containment system and touch pad controls with e-stop and frequency speed controls from 300 to 9000 rpm. Screens required per application. Mounted on a 24" x 20" table.
OAD: 24"L x 20"W x 51"H
Stainless steel belt conveyor with double sided platform. Equipped with a 36" wide x 144" long belt with an infeed height of 55½" and (2) 23" wide x 132" long platforms with 42" high guard rails.
OAD: 152"L x 107"W x 85"H
SWF, Model 1T6K, Tray former hot melt glue sealer with number of trays per minute – depending on materials and application. Tray size range: 11¾" to 38" in Length; 9" to 23" in Width; 2" to 10" in height, Flat blank size range: 16" to 28" in Length; 13" to 40" in Width. Equipped with 16" tray magazine, vacuum pick off station, friction blank wheel feed, Nordson hot melt glue system. Control panel has AB PLC and push button start / stop. Mounted on heavy duty frame.
OAD: 88"L x 74"W x 95"H
Smalley, stainless steel inclined belt conveyor. Equipped with a 12" wide x 280" long food grade blue belt with an infeed height of 37" to 42" and discharge height of 71" to 78". Mounted on locking casters.
OAD: 280"L x 36"W x 76"H
Smalley, Stainless steel incline cleated belt conveyor with amount of product per minute and hour – depending on materials and application. Equipped with 135" long x 48" wide belt with 3" high cleats set on 8" centers, 27" to 34" high infeed and 78" to 85" discharge. Mounted on stainless steel frame with casters.
OAD: 128" L x 71" W x 83" H