Lee, Model 15-20LD12T, 20 liter (5.28 gallon) 316 stainless steel jacketed kettle. Vessel Dimensions: 16¾" ID x 15" deep. Equipped with a tilt out bridge mounted triple motion agitator. Scrape and crossbar powered by a 3 Hp drive, high shear agitator powered by a 5 hp drive, flush mounted sensor and 2" OD / 1½"ID tri-clamp style discharge with penumatic ball valve. Kettle discharges into cart mounted Waukesha model 15 positive displacement pump powered by a 2 hp drive with a 5.79:1 gear ratio for a maximum pumping capacity of 4.32 GPM. Cart mounted system also includes a 1 HP vacuum pump.
Top Fittings:
(1) 3" Sight Glass
(4) 1½" Tri-Clamp
Jacket Fittings: ¾" NPT
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 90"L x 55"W x 105"H
Garvey, Model 9700, Stainless steel, table top belt accumulation conveyor. Equipped with 12" wide x 172" long flat top Intralox product feed conveyor, (1) 12" wide x 96" long and (1) 24" wide x 96" long bi-directional accumulating belts which feed into the product conveyor. Mounted on a stainless steel base frame with height adjustable legs.
OAD: 177" L x 61" W x 52" H
SWF, Model BF400VB, 3-piece bliss case former. Bliss case size range: 9¼" to 24" in Length; 9" to 18" in Width; 4" to 16" in Height. Equipped with 24" long top blank magazine and two 48" long side blank magazines, (6) suction cup vacuum pic n place, friction feed wheel, Nordson hot melt sytem with pattern control and vacuum system. A/B controller with Panel View and safety guarding. Speed dependent on materials, application and machine configuration.
OAD: 82"L x 105"W x 94"H
NSI Newlands, 1,900 gallon, 304 stainless steel, cone top, sprayball, insulated whirlpool tank. Vessel Dimensions: 96" ID x 63" straight wall. Equipped with top 6" ID infeed and 19" ID top manway with bolt down cover, Flat bottom with 60" ground clearance.
Top Port:
(1) 2½" OD x 2" ID Tri-Clamp
(1) 6" ID Infeed
Side Port:
(2) 2.5" OD x 2 ID" Tri-Clamp Draw Off
(2) 3.5" OD x 3 ID" Tri-Clamp
(3) 1½" OD x 1" ID Tri-Clamp Spray Nozzle
(1) 2.5" OD x 2 ID" Tri-Clamp Inlet
Bottom Port:
(1) 3½" OD x 3" ID Tri-Clamp
OAD: 110"L x 100"W x 147"H
NSI Newlands, 40 BBL, 304 stainless steel, cone top insulated tank. Vessel Dimensions: 96" ID x 63" straight wall with a flat bottom. Top 6" Tri-Clamp grist hydrator, (2) 1½" Tri-Clamp ports and spray balls. Equipped with 19" ID top manway with bolt down cover. Bottom draw off 2" Tri-Clamp, under screen 1½" Tri-Clamp, and 12" ID discharge with 16" ground clearance. Bottom mounted double angle & step rake agitation.
Top ports:
(2) 2" OD x 1½" ID Tri-Clamp
(1) 6" ID Tri-Clamp Grist Hydrator
(1) 8" ID Air In/Out to Lower/Lift The Plow
Side Port:
(2) 2" OD x 1½" ID Tri-Clamp
Bottom Port:
(1) 2" OD x 1½" ID Tri-Clamp Under Screen Sprayer
(1) 2½" OD x 2" ID Tri-Clamp Draw Off
(1) 12" ID Discharge
OAD: 120"L x 106"W x 160"H
NSI Newlands, 40 BBL, 304 stainless steel, cone top insulated tank. Vessel Dimensions: 96" ID x 63" straight wall with a flat bottom. Top 6" Tri-Clamp grist hydrator, (2) 1½" Tri-Clamp ports and spray balls. Equipped with 19" ID top manway with bolt down cover. Bottom draw off 2" Tri-Clamp, under screen 1½" Tri-Clamp, and 12" ID discharge with 16" ground clearance. Bottom mounted double angle & step rake agitation.
Top ports:
(2) 2" OD x 1½" ID Tri-Clamp
(1) 6" ID Tri-Clamp Grist Hydrator
(1) 8" ID Air In/Out to Lower/Lift The Plow
Side Port:
(2) 2" OD x 1½" ID Tri-Clamp
Bottom Port:
(1) 2" OD x 1½" ID Tri-Clamp Under Screen Sprayer
(1) 2½" OD x 2" ID Tri-Clamp Draw Off
(1) 12" ID Discharge
OAD: 120"L x 106"W x 160"H
California Pellet Mill, Model 75C, pellet mill with amount of product per hour – depending on materials and application. Equipped with 24" long x 13" wide receiving port, 36" long auger feeder and powered by 2 HP drive into 38" long x 20" diameter continuous paddle mixer and conditioner powered by 25 hp drive and pellet mill chamber powered by 100 hp drive with 16" ID die with 226 in² working area.
OAD: 90"L x 50"W x 105"H
Resina, Model S30, Automatic single head chuck capper. Cap size range: 13mm to 70mm. Containers size range: up to 6" in Diameter and 6" to 15" in Height. Equipped with 96" long x 4½" wide stainless steel container conveyor, cap elevator, cap hopper with disc pin sorter, cap chute, transfer shoe with cap button, dual container grippers and single head chuck style cap tightner. Touch screen HMI. Speed dependent on materials, application and machine configuration. Change parts required to accommodate size range.
OAD: 100"L x 52"W x 102"H
Lee, Model 250D9MS, 250 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 52" diameter x 39" deep. Equipped with lift up covers, 3 Hp bridge mounted scrape agitator, flush mounted sensor and 3" Tri-Clamp style bottom discharge with ball valve and 18" ground clearance. Mounted on (3) leg frame.
Jacket Ports:
(2) 1½" NPT
Nat’l Brd: 12035
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI
OAD: 70"L x 55"W x 80"H
Fanuc, 4 axes, servo driven, robotic case palletizing, automatic pallet stretch wrapper system, with number of cases per minute – depending on materials and application. Capable of moving product from floor level up to 123" in height, and has range of motion of 720 degrees, rated to maximum pick-up weight of 185 Kg. Equipped with vacuum pic-n-place head mounted on robotic arm with 123.72". maximum horizontal reach and has vacuum pump. Remote control panel has Fanuc R30iB controls with digital hour counter and auto / manual switch, fault, fault reset, power and e-stop push button controls, also has hand held, touch pad controller with display.
PMI, Model VXL2-15, automatic, inline, servo driven, case packer. Rated from 5 to 13 cases per minute with number of product – depending on materials, application and pack pattern. Case size range: 5" to 10" in Length x 4" to 7" in Width x 3" to 6" in Height. Equipped with product infeed conveying section, 64" long blank case magazine, fixed case pockets set on 7½" centers, hot melt glue system, bottom case sealer with bottom compression, 12" x 10" product accumulation table with sweeping arm loader, top case sealer and 8" wide x 58" long discharge conveyor. Control panel with AB PLC and touch screen HMI.
OAD: 180"L x 137"W x 94"H
Inline, rotary drop roll die former, hard candy forming machine with amount of product per hour – depending on materials and application. All stainless steel contact parts. Equipped with 6" OD x 10" wide adjustable gap pre-compression forming drums powered by a 1 Hp drive and 8" diameter x 10" wide (8¾" wide tooled) fixed jacketed forming dies powered by a 5.4 Hp drive with a variable speed gearbox. Mounted on a painted base frame.
OAD: 73"L x 48"W x 63"H (On Base)
