Product
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Mokon, model Full Range 311708, combination heater and chiller. Temperature range of 35°F to 200°F depending on materials, application and machine configuration. Rated up to 40 GPM at 32 PSI. Equipped with a single zone 9kW heater, 5 HP compressor, ¾ hp chiller supply pump and 1½ HP process pump. Process, supply and drain fittins are 1" FNPT and has a ½" FNPT system drain with ball valve.
OAD: 60"L x 38"W x 48"H
Lee, Model 125LD12T, 125 liter (33 gallon) 316 stainless steel jacketed kettle. Vessel Dimensions: 25½" ID x 30" deep. Equipped with a tilt out bridge mounted triple motion agitator. Scrape and crossbar powered by a 5 Hp drive, high shear agitator powered by a 7½ hp drive, flush mounted sensor and 2" OD / 1½"ID tri-clamp style discharge with 15" ground clearance.
Top Fittings:
(1) 6" Tri-Clamp
(2) 3" Tri-Clamp
(3) 2" Tri-Clamp
(3) 1½" Tri-Clamp
Jacket Fittings: ¾" NPT
Nat’l Brd: 12861
MAWP: 150 PSI @ 366° F (jacket)
MDMT: -20°F @ 150 PSI (jacket)
MAWP: 50/FV PSI @ 300° F (vessel)
MDMT: -20°F @ 50/FV PSI (vessel)
OAD: 84"L x 50"W x 109"H
Bosch Model SVE 3800, automatic, stainless steel, vertical form fill and seal machine. Rated from 20 to 100 packages per minute – depending on materials, application and machine configuration. Package size range: 3.2" to 20" in Length; 3.2" to 14.2" in Width. Equipped with powered film unwind, film registration, 10" vertical lap seal, dual side belt film assist, 15½" wide seal jaws and mechanical bag gusset. Film specifications: up to 30" in Width; up to 15" in Diameter; 3" Core. Control panel with AB controller and touch screen HMI.
OAD: 96"L x 78"W x 78"H
Pasteurizing system with a 30 Gallon, stainless steel, tank and heat exchange system. Vessel dimensions: 25½" diameter with a 17" straight wall, dome top and slant bottom. Equipped with a 7½ HP Ampco centrifugal pump, APV plate heat exchange and 2"ID x 500" long holding tube. System mounted on a stainless steel frame. Control panel with AB controller, touch screen HMI and chart recorder.
OAD: 72"L x 48"W x 89"H – HTST Skid
72"L x 17"W x 67"H – Control Cabinet
CES, model CES-LT-LIN-50FTx38IN-HOTL liquid nitrogen freeze tunnel with amount of product per hour – depending on materials and application. Equipped with 38" wide x 713" long stainless steel mesh belt with 38" to 42" infeed and discharge height powered by 1½ Hp motor drive, 640" long cooling chamber with 10" high aperture, (2) 15"OD / 12"ID flanged exhaust connections, (18) 1 HP motor circulation fans and lifting hood. Control panel has A/B controller with touch screen HMI. Mounted on multi-leg frame.
OAD: 723"L x 88"W x 76"H
Serpa, Model 2000WA, Automatic, continuous motion, stainless steel, wrap around hot melt glue cartoner rated up to 300 cartons per minute – depending on materials and application. single chain unit set on 12" centers with a carton size range of: 1" to 9" in Length; 1 to 3½" in Width; 5" to 9" in Depth. Equipped with 2½" wide x 84" long product in feed conveyor, 48" long powered blank carton magazine, (2) head rotary pic-n-place, 48" dual worm screw infeed, fixed overhead lugged product assembly with wrap plow closers and lugged side chain indexing conveyor, Nordson hot melt glue system, 36" long product discharge side belt conveyor and full access doors for ease in maintenance. Control panel has AB controller with touch screen HMI and light stack.
OAD: 277"L x 64"W x 98"H
Smalley, stainless steel inclined belt conveyor. Equipped with a 12" wide x 280" long food grade blue belt with an infeed height of 37" to 42" and discharge height of 71" to 78". Mounted on locking casters.
OAD: 280"L x 36"W x 76"H
Fitzpatrick, Model JT, 316 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with 12" ID x 3" deep 304 stainless steel feed pan with 2.75" ID product port, (12) swinging knife / impact blades with screen area of 2" wide x 16" long and 8" long x 2" wide bottom product discharge with 35” ground clearance. Push button start /stop controls and mounted on a base with locking casters.
OAD: 35"L x 32"W x 55"H