Product
Pace incline cleated stainless steel feeder and hopper with amount of product per hour – depending on materials and application. Equipped with 38" wide x 44" long x 28" deep product hopper, 12" wide cleated belt conveyor with 2" high cleats set on 12" centers, 60" long incline section, 20" long top horizontal run, 12" x 12" discharge chute with 50" discharge height.
OAD: 101"L x 44"W x 73"H
Bivans, model Vertuck, semi-automatic, continuous motion, vertical, hot melt glue cartoner. Rated up to 120 cartons per minute – depending on materials application and operator dexterity. Equipped with (3) chains adjustable set on 6" centers, carton size: 7/8" to 5" in length x ¾" to 3½" in width x 2¼" to 10" in depth. Equipped with 24" long blank carton magazine with recipacting single arm vacuum pick and place, Nordson hot melt glue system, 24" long load area each side, 36" long x 3" wide discharge conveyor. Control panel with touch screen HMI.
OAD: 124"L x 65"W x 85"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Nita, Model Joust SSK, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Garvey, model GRX, low pressure looping belt accumulation table. Equipeed with a 8¾" wide belt with an approximate run of 260" long powered by a 1 hp drive with variable speed control. Conveyor has a 46" to 49" infeed / discharge range.
OAD: 125"L x 41"W x 50"H
Nita, Model Joust, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Nita, Model Joust, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel with number of product and bundles per minute – depending on materials and application. Equipped with 27" long x 17" wide in feed conveyor, 29" wide seal jaw with 13" vertical travel, side mounted film racks and splice station, 37" long x 17" wide transfer conveyor and into single zone shrink tunnel with 29" wide flex link conveyor and has 28” in width x 16" in height aperture and 70" long chamber, top mounted blower motor and cooling fan at discharge and film rolls up to 28" in width; and 14" OD on 6" core. Control panel has Allen-Bradley controller with touch screen HMI. Mounted on heavy duty frame with status light bar and interlocked safety guarding.
OAD: 192"L x 80"W x 90"H
Arpac Model TS-2200, Automatic continous motion, servo driven, tray former, loader and hot melt glue sealer rated from 20 to 50 trays per minute – depending on materials and application. Trayer: Size range: 9" to 30" in Length; 7" to 18" in Width; 1½" to 4" in Height with proper change parts. Equipped with 27" wide x 154" long flexlink product in feed conveyor with lane dividers, rotary flight bar indexing feed system with 26" wide flight bar set on 36" centers. 120" long x 16½" wide extended powered blank tray feed conveyor has end lift section to side mounted blank tray magazine with vacuum suction cup pick n place, 96" long lugged tray forming, sealing, discharge conveyor, Nordson hot melt glue system, major / minor flap closers and side rail compression section. Control panel with AB controller and touch screen HMI. Mounted on heavy duty frame with safety door guarding and statis light.
OAD: 432"L x 151"W x 113"H