Patterson Kelly, 2 ft³, 316 stainless steel, twin shell mixer rated to 60 lbs per ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 14" ID product ports with bolt down covers, (2) 21" long side V-Walls and (2) 8" long inner V-Walls, shell powered by a ¾ hp drive, intensifier bar powered by 2 hp drive, butterly valve discharge with 23" ground clearance. Requires 67" ceiling clearance with 22" swing radius / 44" swing diameter. Has push button start / stop controls and digital timers. Mounted on (4) stainless steel leg frame.
OAD: 56"L x 35"W x 59"H
Greerco, Model W750H, Horizontal high shear colloid mill, rated from 30 to 120 gallons per minute – depending on materials, application and machine configuration. Equipped with 2½" OD / 2" ID Tri-clamp inlet with jacketed stator housing, hand wheel adjustable rotor-stator gap and 2½" OD / 2" ID Tri-Clamp discharge with 10½" ground clearance. Rotor powered by 20 HP drive.
OAD: 44"L x 20"W x 25"H
Adco, model CTF-470V, Automatic, compact, stainless steel, single head hot melt glue tray former with number of trays per minute – depending on materials, application and machine configuration. Tray size range of: 8¼" to 25¾" in Length; 7" to 18" in Width; 1½" to 8" in Height. Flat blank size range of: 16¼" to 36" in Length; 15" to 26" in Width. Equipped with a 55" long blank tray magazine, reciprocating (4) suction cup vacuum pic-n-place, dual automatic belt blank tray assist, adjustable stroke single arm forming mandrel, Nordson ProBlue hot melt glue unit and vacuum system. A/B PLC controller with touch screen HMI. Mounted on a stainless steel frame with casters.
OAD: 82"L x 66"W x 80"H
CMI Equipment, model M1-3.9, inclined belt conveyor. Equipped with a 20" wide x 172" long belt with a 20" infeed height and 76" discharge height.
OAD: 176"L x 33"W x 81"H
Saaz, 2000 gallon, 304 stainless steel, low pressure jacketed and insulated tank. Vessel Dimensions: 70" diameter x 120" straight wall with a dish bottom. Equipped with 15½" x 20½" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2"OD / 1"ID Tri-Clamp fitting, top pressure releif valve and 2"OD / 1½"ID Tri-clamp style bottom fittings with 11" ground clearance.
Side Access:
(1) 3½"OD / 3 "ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp
(1) 1"OD / ½"ID Tri-Clamp
Jacket Access:
(2) 1" NPT
OAD: 82"L x 74"W x 162"H
Saaz, 2000 gallon, 304 stainless steel, low pressure jacketed and insulated tank. Vessel Dimensions: 72" diameter x 108" straight wall with a 35" deep cone bottom. Equipped with 15½" x 20" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2"OD / 1"ID Tri-Clamp fitting, top pressure releif valve and (2) 2"OD / 1½"ID Tri-clamp style bottom fittings with 13" ground clearance.
Jacket Access:
(4) 1" NPT
OAD: 84"L x 74"W x 176"H
Mueller, 5,250 gallon, 304 stainless steel, jacketed and insulated tank. Vessel Dimensions: 96" diameter x 138" straight wall with a cone bottom. Equipped with 15½" x 20½" side manway with bolt down cover, (2) thermowells, top pressure releif valve and 2½"OD / 2"ID Tri-clamp style bottom fittings with 3" ground clearance.
Top Access:
(1) 3½"OD / 3"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp
Jacket Access:
(6) 1½" NPT
MAWP: 14.9 PSI @ 100°F (Vessel)
MAWP: 80 PSI @ 100°F (Jacket)
MDMT: 0°F @ 80 PSI (Jacket)
OAD: 110"L x 101"W x 245"H
Quadro 194 Comil 316L stainless steel with capabilities of 1,800-4000 lb/hr. 8" screen span. Typical applications include: dry milling (to reduce coarse material to a smaller, uniform particle size), controlled grinding, dry mixing dispersion, de-agglomeration and wet material reduction. Unit mounted on casters.
OAD: 64"L x 28"W x 62"H
Canco, Model 422-IE-00, Automatic, single head, can seamer. Rated from 10 to 90 cans per minute – depending on materials, application and machine configuration. Can size range: 202 to 404 in Diameter x 214 to 510 in Height with proper change parts. Equipped with (4) roll, double seam, single seaming head, star wheel in feed, hand crank height adjustable, no-can / no-lid and 3 Hp motor drive. Mounted on cast iron platform style base frame with leveling legs and 34" to 37" high in feed and discharge range. Change parts required to accommodate size range changes..
OAD: 60"L x 51"W x 79"H
Feldmeier, 2000 gallon capacity, stainless steel jacketed and insulated process tank. 316L stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 84" diameter with 84" straight wall. Equipped with dome top, 18" OD flip top man way, top mounted 15 Hp side and bottom scrape surface agitation, CIP spray balls and thermowell. Dish bottom has 3½" OD / 3" ID center bottom ball valve discharge with 8" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 722
MAWP: 150 PSI @ 350°F
MDMT: -20°F @ 150 PSI
Top Ports:
(1) 4½"OD / 4"ID Tri-Clamp
(2) 3½"OD / 3"ID Tri-Clamp
Jacket Ports:
(6) 1½" NPT
OAD: 113" L x 91" W x 157" H
Keyence, Model MK-U6000, ink jet coder with auto-shower self cleaning print head. Capable of running 1 to 6 lines at speed up to 2525 characters at 5-dot 1 line printing and 1-dot character spacing, with number of prints per minute – depending on materials and application. Character types alphbetic, numbers, logotypes and symbols with (vertical) character heights of 1mm to 12mm, 0.04" to 0.47" and dot configurations of 5, 7, 10, 12, 14, 16, 24, 32 dot capable. Fonts original, mincho and gothic with print data registration of 500 settings. Standard black MK-10 ink and print head is capable of printing in all directions with distances of 15mm, 0.59" (24 dots or less) 20mm, 0.79" (25 dots or more) and 35mm or 1.38". Auto calender, counter, expiration date, with 2 to 36 number system counter, automatic operation with character direction settings of 90, 180, 360 degrees. MK-P4 touch panel console, with PC software, MK-HB2 (MK builder2) and USB memory device, with automatic nozzle cleaning, ink draining, internal cleaning, error maintenance display and history. RS-232C ethernet interface, stainless steel housing with ambient operating temperatures of 0 to 45 Deg C or 32 to 95 Deg F. Table, cart mounted or print head stand capable.
OAD: 25" L x 25" W x 62" H
Delkor, Model 751, single head, tray former. Tray size range: 12" to 36" in Length; 6" – 26" in Width; 1/2" – 5" in Height. Flat blank size range: 6" to 24" in Width; 15" to 30" in Length. Equipped with 24" long blank tray magazine, reciprocating vacuum pick-in-place, single forming head, Nordson hot melt glue system and Lexan interlocked guarding. AB PLC with touch screen, safety interlocks and E-stop. Speed dependent on materials, application and machine configuration. Change parts required to accommodate size range.
OAD: 113" L x 80" W x 94" H
