Product
NSI Newlands, 2000 gallon, 304 stainless steel, low pressure jacketed and insulated tank. Vessel Dimensions: 65" diameter x 124" straight wall with a dish bottom. Equipped with 14" x 17" side manway with bolt down cover, (2) thermowells, top pressure releif valve and 2"OD / 1½"ID Tri-clamp style bottom fittings with 6" ground clearance.
Top Access:
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
Side Access:
(2) 2"OD / 1½"ID Tri-Clamp
Jacket Access:
(2) 1" NPT
OAD: 75"L x 70"W x 165"H
NSI Newlands,2,300 gallon, 304 stainless steel, low pressure jacketed and insulated tank. Vessel Dimensions: 80" diameter x 84" straight wall with a 38" deep cone bottom. Equipped with 16" x 20" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2"OD / 1½"ID Tri-Clamp fitting, top pressure releif valve and (2) 2"OD / 1½"ID Tri-clamp style bottom fittings with 12" ground clearance.
Jacket Access:
(4) 1" NPT
OAD: 86"L x 84"W x 155"H
Patterson Kelly, 5 ft³, 304 stainless steel, contact parts, twin shell mixer rated to 95 lbs per cubic foot with amount of product per hour – depending on materials and application. Equipped with (2) 19½" ID product ports with bolt down covers, (2) 32" long side V-Walls, (2) 12" long inner V-Walls, 6" ID butterly valve discharge with 34" ground clearance. Shell powered by ¾ Hp drive. Requires 88" ceiling clearance with 28" swing radius and 56" swing diameter. Mounted on (4) leg frame with locking casters.
OAD: 82"L x 72"W x 77"H
Bandrite Model 6000 RTL, Automatic, continuous motion, band style bag sealer rated from 250 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled, tilt away sealing head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600°F, bag trim station, 1 line coder and hand crank height adjustable for different size bags. Mounted over 6" wide x 100" long stainless steel conveyor with variable speed controller powered by ¼ Hp drive.
OAD: 108" L x 36" W x 59" H
Loma, Model IQ4, Automatic, in line, stainless steel, metal detector with number of product per minute – depending on materials and application. Total Aperture: 12" in Height; 21½" in Width. Working Aperture: 10½" in Height; 19½" in Width. Equipped with 20" wide x 72" long Intralox product conveyor belt and is 34" to 38" adjustable in feed and discharge height, with ram arm reject, 7" color touch screen controller with user interface, start, stop, e-stop push button controls and signal tower. Sensitivities: depending on product, container and environment being run in. Temperature range: -10 to +40 Deg C, 14 to 104 Deg F. Ethernet and USB capable. Mounted on stainless steel frame with height adjustable legs.
OAD: 72"L x 64"W x 50"H
Loma, Model IQ4, Automatic, in line, stainless steel, metal detector with number of product per minute – depending on materials and application. Total Aperture: 12" in Height; 21½" in Width. Working Aperture: 10½" in Height; 19½" in Width. Equipped with 20" wide x 72" long Intralox product conveyor belt and is 34" to 38" adjustable in feed and discharge height, with ram arm reject, 7" color touch screen controller with user interface, start, stop, e-stop push button controls and signal tower. Sensitivities: depending on product, container and environment being run in. Temperature range: -10 to +40 Deg C, 14 to 104 Deg F. Ethernet and USB capable. Mounted on stainless steel frame with height adjustable legs.
OAD: 72"L x 64"W x 50"H
FBF Italia, Model 2.50 Lab size, two stage, homogenizer. Rated output capacity of 50 liters per hour – depending on materials, application and machine configuration. Maximum operating pressure up to 8700 psi. Equipped with manual homogenizing valve actuator assembly and a 3¼" diameter x 12" deep pressurized hopper, ¼" OD discharge port and digital pressure gage. Mounted on (4) legs.
OAD: 32"L x 18"W x 30"H
Carle Montanari Model Nanoflex 275/205 is a intermittent motion chocolate loose mold plant. 5 up to 15 molds per minute and 600 to 700 kg per hour depending on material and application. Currently set with 275mm × 205mm molds but non standard sizes are also available as an option. Equipped with Carle Montanari OPM 5,500 lb and Carle Montanari OPM 3,000 lb water jacketed and agitated, electrically heated and stainless steel chocolate tanks with thermostats and is one shot capable with one split hopper included and one shot depositing plates. Continuous mixer above depositor hopper with flex screw conveyor feeder, depositor, vibration section. cross conveyor, tower cooling tunnel and has a 8+8, demoulding section, cross conveyor mold heater with scraping roller and inspection station to check for clean mold. If not clean, it is rejected. Control panel with touch pad contoller has readout and statis light bar. Mounted on heavy duty stainless steel frame.
NANO can easily handle all types of production: solid, solid with inclusions, one shot and filled products this versatility allows manufacturers to exploit the full range of available technologies (traditional shell and fast-shell)..
CBE, Model 205, Auger fed, valve bag filler capable of handling a varity of powders, flakes and granular products rated from 1 to 6 bags per minute – depending on materials, application and operator dexterity. All 304 stainless steel contact parts. Fill range: 20 to 110 lbs (9-50KG) with typical scale weight accuraies + / – .5% of target weight. Equipped with 16" long x 13" wide x 32" deep product hopper with 12" OD top port and auger feeder with 5 Hp belt motor drive, to stainless steel 2-1/2" OD filling tube with adjustable bag rest, with working temperatures 40 to 90 Deg F. Control panel has DBE filler controller with touch pad controls and start, stop, e-stop push buttons. Mounted on heavy duty steel frame.
OAD: 69" L x 32" W x 76" H
Morcos, Model RM1000, 40 ft³, (35 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 316L stainless steel contact parts. Inner mixing chamber dimensions of 76" in Length; 30" in Width; 33" in Depth. Equipped with flip up cover, lift out safety screens, 2¾" OD motor shaft, 2" wide x ¼" thick (outer) and 2½" wide x (¼)" thick (inner) stainless steel ribbons. 11" OD center bottom discharge with 50" floor clearence and 14.75 Hp motor. Mounted on stainless steel (4) leg frame with 41" wide x 143" long stainless steel platform set 70" off the ground with 36" high rails and a 7-step staircase.
OAD: 146"L x 109"W x 114"H
Intralox, Model ARB. stainless steel, activated roller belt conveyor enables accurate and reliable aligning of products with number of product per minute – depending on materials and application. Equipped with (2) 12" wide x 58" long activated rollers belts powered ½ Hp motor drive with safety guarding has 34" in feed and discharge height. Angled rollers embedded in the belt surface gently align products parallel along the length of the conveyor.
OAD: 60" L x 36" W x 36" H
Stein, Model APB, stainless steel overflow batter applicator. For use with conventional pumpable batters. Products per minute – dependant on materials and application. Equipped with a 35" wide x 63" long stainless steel wire belt, 35" wide batter double curtain to coat top and sides of product, lowered belt section to coat bottom of product and batter pump. Mounted on a stainless steel base with casters.
OAD: 37"L x 50"W x 44"H