Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Wexxar, Model WF-20T, Automatic, inline case erector, bottom tape sealer. rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Blank size range: 11¼" to 38" in length; 10" to 40" in height. Case size range: 6¼" to 24" in Length; 5" to 18" in Width; 6" to 41" in Height (with top open). Equipped with 132" long powered blank case magazine with recipicating pin and dome case forming plates, pneumatic case squareing device, minor and major flap closers, case pusher bar and 6" Dekka flip up tape head with 32" long dual side belt discharge section and is hand crank height and width adjustable with Siko gages. Control panel has an AB controller touch screen HMI.
OAD: 225"L x 64"W x 90"H
Nita, Model Joust SSK, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Garvey, model GRX, low pressure looping belt accumulation table. Equipeed with a 8¾" wide belt with an approximate run of 260" long powered by a 1 hp drive with variable speed control. Conveyor has a 46" to 49" infeed / discharge range.
OAD: 125"L x 41"W x 50"H
Nita, Model Joust, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Nita, Model Joust, top pressure sensetive labeler. Equipped with (2) parallel 6" wide x 60" long stainless steel container conveyors and servo driven pressure sensitive label applicator with label range of ½" to 6" wide and ½" to unlimited in length. Swing arm touch screen controls. Mounted on stainless steel and anodized aluminum frame with leveling legs and casters. Speed dependant on materials, application and machine configuration.
OAD: 77"L x 55"W x 77"H
Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel with number of product and bundles per minute – depending on materials and application. Equipped with 27" long x 17" wide in feed conveyor, 29" wide seal jaw with 13" vertical travel, side mounted film racks and splice station, 37" long x 17" wide transfer conveyor and into single zone shrink tunnel with 29" wide flex link conveyor and has 28” in width x 16" in height aperture and 70" long chamber, top mounted blower motor and cooling fan at discharge and film rolls up to 28" in width; and 14" OD on 6" core. Control panel has Allen-Bradley controller with touch screen HMI. Mounted on heavy duty frame with status light bar and interlocked safety guarding.
OAD: 192"L x 80"W x 90"H
Arpac Model TS-2200, Automatic continous motion, servo driven, tray former, loader and hot melt glue sealer rated from 20 to 50 trays per minute – depending on materials and application. Trayer: Size range: 9" to 30" in Length; 7" to 18" in Width; 1½" to 4" in Height with proper change parts. Equipped with 27" wide x 154" long flexlink product in feed conveyor with lane dividers, rotary flight bar indexing feed system with 26" wide flight bar set on 36" centers. 120" long x 16½" wide extended powered blank tray feed conveyor has end lift section to side mounted blank tray magazine with vacuum suction cup pick n place, 96" long lugged tray forming, sealing, discharge conveyor, Nordson hot melt glue system, major / minor flap closers and side rail compression section. Control panel with AB controller and touch screen HMI. Mounted on heavy duty frame with safety door guarding and statis light.
OAD: 432"L x 151"W x 113"H
Patterson Kelly, 2 ft³, 316 stainless steel, twin shell mixer rated to 60 lbs per ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 14" ID product ports with bolt down covers, (2) 21" long side V-Walls and (2) 8" long inner V-Walls, shell powered by a ¾ hp drive, intensifier bar powered by 2 hp drive, butterly valve discharge with 23" ground clearance. Requires 67" ceiling clearance with 22" swing radius / 44" swing diameter. Has push button start / stop controls and digital timers. Mounted on (4) stainless steel leg frame.
OAD: 56"L x 35"W x 59"H
Greerco, Model W750H, Horizontal high shear colloid mill, rated from 30 to 120 gallons per minute – depending on materials, application and machine configuration. Equipped with 2½" OD / 2" ID Tri-clamp inlet with jacketed stator housing, hand wheel adjustable rotor-stator gap and 2½" OD / 2" ID Tri-Clamp discharge with 10½" ground clearance. Rotor powered by 20 HP drive.
OAD: 44"L x 20"W x 25"H
Adco, model CTF-470V, Automatic, compact, stainless steel, single head hot melt glue tray former with number of trays per minute – depending on materials, application and machine configuration. Tray size range of: 8¼" to 25¾" in Length; 7" to 18" in Width; 1½" to 8" in Height. Flat blank size range of: 16¼" to 36" in Length; 15" to 26" in Width. Equipped with a 55" long blank tray magazine, reciprocating (4) suction cup vacuum pic-n-place, dual automatic belt blank tray assist, adjustable stroke single arm forming mandrel, Nordson ProBlue hot melt glue unit and vacuum system. A/B PLC controller with touch screen HMI. Mounted on a stainless steel frame with casters.
OAD: 82"L x 66"W x 80"H
