Fanuc, Model M-410IC/110, bag palletizer, 4 axes, articulated rotary joint, servo driven, robotic, pic-n-place arm capable of palletizing and depalletizing and rated from 5 to 15 cycles per minute with number of product – depending on materials, application, machine configuration and pack pattern. Unit is capable of moving product from floor level up to 88" in height, and has range of motion of 720 degrees, rated up to maximum pick-up weight of 110 Kg. Equipped with forked vacuum bag head mounted on robotic arm with 94.6" maximum horizontal reach and has vacuum pump. Remote control panel has Fanuc R30iB controls with digital hour counter and auto / manual switch, fault, fault reset, power and e-stop push button controls, also has hand held, touch pad controller with display. Mounted on platform style base.
OAD: 94"L x 60"W x 101"H (Robot)
600 gallon capacity, 316 stainless steel single wall tank. Vessel dimensions: 66" diameter with 36" straight wall and 20" deep cone bottom. Equipped with dome top, 18" OD flip top man way, top mounted 2 Hp prop agitation, flush mounted sensor and CIP spray ball supplied by 2"OD / 1½"ID tri-clamp fitting. Cone bottom has 2½" OD / 2" ID tri-clamp discharge with 15" ground clearence.
Top Ports:
(2) 3½" OD / 3"ID Tri-clamp
OAD: 76"L x 76"W x 107"H
Tronics, Model S30, stainless steel, open frame, stepper driven, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute with number of containers – depending on materials and application. Label size range up to: 8¾" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement. Equipped with 4½" wide x 116" long plastic Delrin product conveyor and has 32" in feed and discharge height, with pneumatic gate indexing and adjustable guide rails, no container / no label, single label head with 9½" high peeler plate and 5" high x 18" long wrap belt, 3-sided container trap and wrap, 12" OD label reel on 3" OD core and is hand crank adjustable. Control panel has touch pad controls with read out and up to 100 job memory with start and e-stop push buttons. Mounted on stainless steel frame with casters and leveling legs.
OAD: 120" L x 54" W x 56" H
Ferrell Ross, Model 18 x 12 Flakemaster, flaking mill. Rated up to 150 lbs per hour – depending on materials, application and machine configuration. Equipped with an 11½" wide x 16" long vibratory feed pan, (2) 12" wide x 18" diameter jacketed compression rollers each powered by a 7½ drive, air over hydraulic pump, pneumatic scrapers and 30" ground clearance from the frame.
OAD: 74"L x 61"W x 85"H
APV, Model Paraflow, stainless steel, plate and frame heat exchanger. Approx 120 total ft² heat transfer area with a flow rate of 1 to 45 gallons per minute – depending on materials, application and machine configuration. Equipped with (60) plates 32" in Length; 9" in Width; in (3) zones. (16) 2½" OD / 2" ID seated bevel style transfer ports. Mounted on stainless steel base frame.
OAD: 67"L x 24"W x 61"H
Stainless steel, two tier, pack off conveyor. Equipped with (1) 12" wide x 280" long belt with 2" high cleats on 16" centers and an infeed and discharge height of 31" to 36" and (1) 12" wide x 192" long belt with an infeed and discharge height of 39" to 44". Both belts independently powered by drives each with variable speed controls.
OAD: 293"L x 35"W x 55"H
Tri-Mach stainless steel frame belt conveyor. Equipped with 13" wide x 206" long table top product conveyor belt with ¾" high cleats set on 12" centers, 35" to 39" in feed and discharge height range. Mounted on stainless steel leg frame with locking casters.
OAD: 212"L x 35"W x 48"H
Stainless steel frame belt indexing conveyor. Equipped with 7½" wide x 183" long table top product conveyor belt with 2" high cleats set on 11½" centers, 37" to 44" in feed and discharge height range. Mounted on stainless steel leg frame with locking casters. Control panel with push button start / stop and index / continuous switch.
OAD: 192"L x 27"W x 55"H
Stainless steel frame belt conveyor. Equipped with variable speed controler, 15¾" wide x 203" long table top product conveyor belt with 36" to 42" in feed and 40" to 45" discharge height range. Mounted on stainless steel leg frame with locking casters.
OAD: 215"L x 34"W x 46"H
Fitzmill, Model D6A, 316 stainless steel construction, hammer mill. Pounds of product per hour – depending on materials and application. Equipped with 12" long x 12" wide x 10" deep stainless steel product feed hopper, 3" diameter feed auger, (16) fixed stainless steel knife / impact blades and 19” long x 9½” wide product discharge with 35” floor clearance. Control panel has speed adjust dials and start, stop buttons for mill and feed screw.
OAD: 51"L x 44"W x 64"H
Lee, model 100CHD9MSI, 100 gallon, 316 stainless steel, slanted double motion scrape surface agitation, half jacketed tilting kettle. Vessel dimensions: 36" diameter x 36" deep with 20" straight wall, 60" feeding height and 2½" OD/2" ID bottom tri-clamp discharge port with 18" ground clearance. Equipped with bridge mounted scrape surface agitation and lift off cover. Mounted on (4) leg base frame.
National Board: 10190
Jacket Access: (2) 1½" NPT
MAWP: 100 PSI @ 338°F
MDMT: -20°F @ 100 PSI
OAD: 91"L x 60"W x 82"H
Arpac, Model 708HBD32, Automatic, stainless steel, intermittent motion, shrink bundler and tunnel. Package size range: 1" to 10" in Length; 3.5" to 10.5" in Width; up to 8" in Height. (Specifications and product size capabilities will vary depending on application.) Equipped with 7½" wide x 57" long right angle in feed conveyor with dual pneumatic loading arms, top and bottom film rolls for an up to 32" wide web and 33" wide top and bottom heat seal jaws with product hold down. Integrated shrink tunnel with 12" high x 36" wide x 60" long heat chamber, 96" long x 34" wide Intralox conveyor and end mounted cooling fan. Control panel has an AB PLC with touch screen HMI. Mounted on leveling legs. Rates / speed dependent on materials, application, pack pattern and machine configuration.
OAD: 160"L x 70"W x 95"
