Unitrak Corp, Model "S2" Tip Trak, Z style bucket elevator. Bucket speeds rated from 0 to 150 feet per minute. Equipped with plastic product buckets with inside dimensions of 10½" long x 4½" wide x 5" deep, 50" long horizontal floor run at 22" in feed height, 128" vertical lift, 50" overhead horizontal top run, 129" discharge height and a 1 Hp drive. Mounted on A-frame base with casters. Volume of product dependant on materials, application and machine configuration.
OAD: 177" L x 90" W x 157" H
Axon, Model EZ-48-14W11-13, dual zone, stainless steel, over the conveyor convection air sleeve shrink tunnel. Number of containers per minute – depending on materials, application and machine configuration. Total Aperture: 13" in Height; 13½" in Width. Tunnel: 24" in Length each chamber (48" total length). Equipped with hand crank height adjustable heat chambers with (2) top mounted (1/3) hp recirculating blowers, on / off power switches with digital temperature controllers, heat up/cool down switch each chamber. Mounted on common base stand.
OAD: 48"L x 44"W x 76"H
10 ft³, (7 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of 43" in Length; 18" in Width; 22" in Depth. Equipped with flip up cover, lift out safety screen, 1½" OD motor shaft, 1" wide x ¼" thick (outer) and 1(1/8)" wide x ¼" thick (inner) stainless steel ribbons. 3" OD center bottom discharge with slide gate valve and 49" floor clearence. Powered by a 1½ Hp motor. Mounted on stainless steel (6) leg frame with a 40" x 32" standing platform.
OAD: 91"L x 63"W x 87"H
Smalley Mfg Co, stainless steel, trough style vibratory feed conveyor with (12) product lanes and 2" wide troughs, with amount of product per hour – depending on materials and application. Equipped with 24" wide x 112" long conveying bed and has 12" high infeed side wall / 7" high discharge side wall, with open end discharge and 31" ground clearance. Mounted on heavy duty stainless steel frame.
OAD: 118" L x 30" W x 44" H
Model MB-23-60, 304 stainless steel, 48 ft³ total (32 ft³ workable), dual shaft mixer with pounds of product per hour – depending on materials and application. Inner chamber dimensions: 60" in Length; 46" in Width; 32" in Depth. Equipped with pneumatic lifting safety grate, (2) 4" OD shafts with 8¾" x 9" stainless steel paddles independently powered by 7½ Hp motor drives, (2) 19" wide x 7" high end discharges with pneumatic covers and 27" ground clearance. Control panel has push button start / stop, door open / close switches, digital timer and variable speed controls. Mounted on stainless steel (4) leg base frame.
OAD: 93"L x 70"W x 66"H
Vemag, model R500, continuous, twin screw, vacuum stuffer. Rated from 500 to 2,500 Kg’s of product per hour with portion weights from 5 to 30,000 grams – depending on materials, application and machine configuration. Equipped with 37" OD x 32" deep stainless steel, tilt back product hopper with auger, twin screw product feed system (change part per application), vacuum pressure gauge, oil-less vacuum pump and discharge port with 4½"OD / 4"ID Tri-Clamp discharge. Control panel has touch pad controller with start / stop push buttons. Mounted on (4) leg frame with locking casters.
OAD: 43"L x 29"W x 73"H
Pack West, Model CESF, Automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials, application and machine configuration. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 10½" wide cleated cap conveyor belt with ¾" high cleats on 3" centers, 33" long x 30" wide x 32" deep stainless steel bulk product hopper, 33" long discharge chute with 64" discharge height. Mounted on a stainless steel base frame with leveling pads.
OAD: 63"L x 60"W x 101"H
Pack West, model CESF, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials, application and machine configuration. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 10½" wide cleated cap conveyor belt with ½" high cleats on 7½" centers, 33" long x 30" wide x 33" deep stainless steel bulk product hopper, 32" long discharge chute with 69" discharge height. Mounted on a stainless steel base frame with leveling pads.
OAD: 63"L x 57"W x 103"H
Pack West, model CESF, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials, application and machine configuration. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 10½" wide cleated cap conveyor belt with ½" high cleats on 4½" centers, 33" long x 30" wide x 33" deep stainless steel bulk product hopper, 32" long discharge chute with 65" discharge height. Mounted on a stainless steel base frame with leveling pads.
OAD: 60"L x 58"W x 99"H
Pfening, high pressure, in-line sifter. Rated from 125 lbs to 500 lbs of product capacity per minute – depending on materials, application and machine configuration. 304 stainless steel housing with cast iron drive and base. Equipped with 36" OD x 18" straight wall, (4) decks each with 7 square feet of screen sifting area and has 4" infeed / outfeed pneumatic conveying ports, with tailing container. Mounted on heavy duty frame.
OAD: 63"L x 44"W x 88"H
Pfening, high pressure, in-line sifter. Rated from 125 lbs to 500 lbs of product capacity per minute – depending on materials, application and machine configuration. 304 stainless steel housing with cast iron drive and base. Equipped with 36" OD x 18" straight wall, (4) decks each with 7 square feet of screen sifting area and has 4" infeed / outfeed pneumatic conveying ports, with tailing container. Mounted on heavy duty frame.
OAD: 63"L x 44"W x 88"H
Hamer Fischbein complete bag filling line. Equipped with a 83" long x 78" wide 100 FT³ product hopper, Hamer model 600NW+ gravity servo bagging scale with an 8" long x 6" wide bag clamp, Fischbein model B2600 poly bag sealer mounted above a 12" wide x 132" long belt conveyor, 36" wide x 93" long bag orientation conveyor, 24" wide x 89" long bag compression conveyor, 24" wide x 72" long gravity roller conveyor and 27" wide x 58" long stainless steel top table. Control panel with an AB controller and touch screen HMI. Speed dependent on materials, application, machine configuration and operator dexterity.
OAD: 504"L x 105"W x 240"H
