Stainless Fabrication Inc, 100 Gallon Dual Compartment, 316 stainless steel, insulated flavor tank. Each chamber is 100 gallons with inner dimension of 28" x 34" x 33" Deep. Equipped with lift up covers, 16" diameter manway, top mounted prop agitation powered by ½ Hp motor drive and CIP spray balls supplied by 2½"OD / 2"ID Tri-Clamp fittings. Slant bottom has 2½" OD / 2" ID Tri-Clamp side bottom discharge with 8" floor clearance.
Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (Left Compartment)
(1) 4½"OD / 4"ID Tri-Clamp
(1) 3"OD / 2½"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
Top Access Ports (Right Compartment)
(2) 4½"OD / 4"ID Tri-Clamp
(1) 3"OD / 2½"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
OAD: 81"L x 48"W x 81"H
Cherry Burrell, model BC, 3- Compartment, 304 stainless steel, low pressure jacketed and insulated flavor tank. Each chamber is 150 gallons with inner dimension of 28" x 34" x 39" Deep. Equipped with lift up covers, 28" x 12" manway, top mounted prop agitation powered by ½ Hp motor drive. Slant bottom has 2" OD / 1½" ID Tri-Clamp side bottom discharge with 10½" floor clearance.
Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (each compartment)
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
Jacket Ports
(2) ¾" NPT
OAD: 97"L x 41"W x 75"H
Cherry Burrell, model BC, 2-Compartment, 304 stainless steel, low pressure jacketed and insulated flavor tank. Left chamber is 100 gallons with inner dimension of 24" x 29" x 39" Deep. Right chamber is 200 gallons with inner dimension of 44" x 29" x 39" Deep. Equipped with lift up covers, top mounted prop agitation powered by ¾ Hp motor drive. Slant bottom has 2½" OD / 2" ID Tri-Clamp side bottom discharge with 13½" floor clearance.
Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (each compartment)
(2) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
Jacket Ports
(2) ¾" NPT
OAD: 78"L x 38"W x 65"H
American Food Equipment Company, 304 stainless steel, 80 ft³ total (50 ft³ workable), dual shaft mixer with pounds of product per hour – depending on materials and application. Inner chamber dimensions: 89" in Length; 49" in Width; 36" in Depth. Equipped lift up safety grate, (2) 3" OD shafts with 8" x 13" stainless steel paddles independently powered by 10 Hp motor drives, (2) 22" wide x 8½" high end discharges with pneumatic covers and 29" ground clearance. Control panel has push button start / stop, and forward / reverse switch. Mounted on stainless steel (4) leg base frame.
OAD: 123"L x 74"W x 69"H
Urschel, Model M, stainless steel, belt fed, dicer, shredder and strip cutter. Capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 29" x 9½" load area on feed belt and 11½" x 16" discharge chute with 16" ground clearance. Control panel with start and stop push buttons controls. Mounted on (4) leg stainless steel frame with casters.
Change parts are needed to accommodate size range changes.
OAD: 106"L x 43"W x 55"H
Stainless steel table top conveyor. Equipped with a 23½" wide x 168" long belt with a 35" to 39" infeed / discharge height. Control panel with push button start / stop and variable speed control.
OAD: 180"L x 53"W x 55"H
Two stage, single plunger, laboratory homogenizer capable of 15 gph and minimum sample size of one pint. All 316 S/S contacts, sub micron dispenser has 8,000 psi continuous operating pressure, 10,000 psi intermittent operating pressure (20 minute maximum), 2 1/8" stroke, ball valve cylinder, and 3-way valve and bypass with S/S tubing. Equipped with pressure gauge. Mounted on stainless steel frame with casters.
OAD: 36"L x 30"W x 60"H
Texwrap Model ST-3322 /1322, automatic L-Bar sealer and shrink tunnel. Package size range: 2" to 32" in Length; 2-3/4" to 19.5" in Width; to 10.5" in Height. Equipped with 46" long x 19" wide in feed conveyor, 22" wide cross seal bar, 33" long side seal bar, closing conveyor with 3 neoprene belt (each 49" long x 6" wide), perf wheel, scrap re-wind and safety guarding. MicroLogix 1400 with swing arm touch pad and E-Stop. Film specifications: center fold film 6" to 28" in Width; to 15" in diameter
Texwrap Model T-1322 single zone shrink tunnel. Total aperture: 13-1/2" in Height; 22" in Width; 42" tunnel Length. Equipped with 15-1/2" wide x 66" long stainless steel mesh conveyor and top mounted blower. Controls for temperature (up to 400° F), conveyor speed and variable velocity air flow.
Speed dependent on materials, application, machine configuration and operator dexterity.
OAD Sealer: 100" L x 60" W x 69" H
OAD Tunnel: 66" L x 44" W x 80" H
Mokon Model DR Series DR4018AFW, 9kW – 18kW circulating water control system rated from 40°F to 250°F and up to 40 gallons per minute at 32 psi. Equipped with stainless steel pump housing, impeller and shaft with a silicon-carbide seal, 1.5 Hp ODP motor, controller with LCD indication of set point and process fluid temperature and automatic air purge, helps reduce air from the processing lines and system during start-up to prevent potentially harmful air pockets from forming with 10 foot power cord and Epoxy powder coated cabinet provides internal component protection Mounted on removable casters for ease of mobility.
OAD: 36" L x 20" W x 24" H
Nita, Model XP100, stainless steel, wrap around pressure sensitive labeler rated from 100" to 1570" on wrap labels per minute with number of containers – depending on materials and application. Label size range: 1" to 9" in Height. Equipped with 116" long x 4" wide plastic Delrin product in feed conveyor with adjustable guide rails, aligning belts for container squaring, label head with 10" high peeler plate and 16" long x 6" high side wrap conveyor all hand crank adjustable. Control panel has touch screen HMI. Mounted on stainless steel base frame with casters and leveling legs.
OAD: 142"L x 60"W x 73"H
Dorner, Model 2200, aluminum frame belt conveyor. Equipped with a 12" wide x 144" long belt with a 29" to 38" infeed / discharge range and variable speed controller.
OAD: 144"L x 18"W x 30"H
Arpac, Model 708HBD32, automatic, stainless steel, intermittent motion, shrink bundler and tunnel. Package size range: 1" to 10" in Length; 3.5" to 10.5" in Width; up to 8" in Height. (Specifications and product size capabilities will vary depending on application.) Equipped with 7½" wide x 57" long right angle in feed conveyor with dual pneumatic loading arms, top and bottom film rolls for an up to 36" wide web and 33" wide top and bottom heat seal jaws with product hold down. Integrated shrink tunnel with 14" high x 36" wide x 60" long heat chamber, 102" long x 34" wide Intralox conveyor and end mounted cooling fan. Control panel has an AB PLC with touch screen HMI. Mounted on leveling legs. Rates / speed dependent on materials, application, pack pattern and machine configuration.
OAD: 160"L x 64"W x 94"H
