Product
BMI / Benda MFG, stainless steel, inclined cleated conveyor. Equipped with 12" to 15" infeed height, 12" wide conveyor belt with 2" high cleats set on 12" centers. Conveyor has 22" long bottom horizontal run, 41" long incline, 20" long top horizontal run with 33" to 36" discharge range. Powered by ½ Hp motor drive with variable speed. Mounted on stainless steel multi-leg frame with leveling legs.
OAD: 87"L x 30"W x 38"H
Custom Advance, 48" diameter, separation vibratory sifter. Volumes per hour – depending on materials, application and machine configuration. Equipped with (4) 48" OD x 8" High stainless steel seperation sections and (3) screens (change part per application). Each deck has 12" long discharge spout with 8" OD discharge port and (2) 6" OD ports with plugs. Discharge ground clearances; 46" / 38" / 29" / 22". Top cover has 8" OD center product port and (2) 6" OD inspection ports with plugs. Mounted on vibratory pedestal style base.
OAD: 60"L x 60"W x 63"H
CVP Model Mark lll, Semi automatic, modified atmosphere, vacuum and gas flush bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system (50" usable seal area) has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.
OAD: 54" L x 40" W x 58" H
BMI, stainless steel belt conveyor. Equipped with a 24" wide x 96" long belt with a 22" to 38" infeed / discharge range. Powered by a ¾ hp drive with a variable speed controller.
OAD: 96"L x 40"W x 38"H
Arpac, Model 708HBD32, automatic, stainless steel, intermittent motion, shrink bundler and tunnel. Rated from 5 to 30 cycles per minute with number of product – depending on materials, application, pack pattern and machine configuration. Product size range: 1" to 11" in Length; 1" to 32" in Width; up to 8½" in Height. Equipped with 7½" wide x 57" long right angle in feed conveyor with dual pneumatic loading arms, top and bottom film rolls for an up to 36" wide web and 33" wide top and bottom heat seal jaws with product hold down. Integrated shrink tunnel with 20½" high x 33" wide x 60" long heat chamber, 102" long x 34" wide Intralox conveyor and end mounted cooling fan. Control panel has an AB PLC with touch screen HMI. Mounted on heavy duty frame with leveling legs.
OAD: 160"L x 64"W x 94"H
Flexicon, Model 1450, Stainless steel auger feeder with hopper capable of transferring up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with 36” long x 36” wide x 27” deep stainless steel agitated product hopper with cover and ½ Hp agitator drive, with 3" OD x 180" long stainless steel product conveying screw, 4" OD x 180" long flexable poly tube and has top mounted 3 Hp motor drive with 6” ID product discharge port with 120" discharge height. Control panel has start, stop, e-stop controls with VFD vari-speed controller. Mounted on (4) leg stainless steel frame with casters.
OAD: 182"L x 51"W x 152"H
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exterior parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8616
MAWP: 100 PSI @ 350°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(4) 1½" NPT
OAD: 130" L x 130" W x 262" H
Custom Cut Metal, Model CCMM015792, 90° stainless steel frame conveyor. Equipped with a 4½" wide belt, 48" long infeed to 90° right hand turn to a 48" long discharge with a 33" – 38" infeed / discharge height range and powered by a ½ hp drive.
OAD: 72"L x 90"W x 37"H
Unibloc, Model PD550, Positive displacement pump with 316 stainless steel contact parts. Rated from 20 to 225 gallons of product per minute – depending on materials, application and machine configuration. 500 psi maximum working pressure, temperature range of 400° F and capable operating both clockwise, or counter clockwise. Equipped with a 3½" OD / 3" ID Tri-clamp style product charge / discharge with 12" ground clearance and variable speed controller. Powered by a 7½ Hp drive with a 4.43:1 gear ratio for a current maximum rate of 113.8 gallons / minute. Mounted on a 40" long x 16" wide stainless steel cart with casters.
OAD: 57"L x 19"W x 39"H
Quincy, Model QGSV30 screw compressor rated to 136 ACFM @ 100 PSI with a 120 Gal receiver tank. Includes direct drive transmission for power saver, variable speed controls, and quiet enclosure noise output to as low as 66 dBA . Additional features Air Systems Air/Oil/Water separator.
MDMT: 115°F @ 100 PSI
MAWP: 182 PSI @ 115°F
Nat’l Brd: 53401
OAD: 72" L X 32" W X 72"H
Langen Model B1, Semi-automatic, horizontal, continuous motion, hand load, hot melt glue cartoner, rated from 15 to 80 cartons per minute – depending on materials, application, machine configuration and operator dexterity. Carton size range: 1-3/4" to 12" long x 3/4" to 6" wide x 3-3/4" to 14" deep. Equipped with (4) chains adjustable set on 18" centers and 1" high x 2" long lugs, blank carton magazine, (2) head reciprocating vacuum carton pick n place, 9′ long load area, carton squaring rail, (2) gun hot melt glue systems with pattern controller, compression discharge and vacuum system with pump. Control panel with start machine jog, glue gun carton, vacuum pump, controls with e-stop. Tilt-able frame for gravity assist product loading. Mounted on base frame with barrier guarding and leveling legs.
OAD: 300"L x 58"W x 72"H
New England Model NEHBT750AJ, automatic, stainless steel, plastic bulk bottle unscrambler, rated from 50 to 625 container per minute – depending on materials and application. Container size: 3/4" to 8-1/2" in Diameter; up to 13" in Height and is capable of handling a wide variety of sizes and shapes including round, square, oval, straight wall, and handled containers (with proper change parts). Equipped with 72" OD sorting bowl, non scuffing nylon faced transfer, oritentaion and discharge belts, with clear hinged safety doors. Control panel has A/B CPU controls with start, stop and e-stop push button controls. Stainless steel product feed hopper with 60" long x 57" wide x 36" high product hopper and 93" long x 34" wide inclined feed belt with 4" high cleats on 14" centers.
OAD: 108" L x 90" W x 94" H Unscrambler
108" L x 60" W x 100" H Feed Hopper