Product
Quincy, Model QGSV30 screw compressor rated to 136 ACFM @ 100 PSI with a 120 Gal receiver tank. Includes direct drive transmission for power saver, variable speed controls, and quiet enclosure noise output to as low as 66 dBA . Additional features Air Systems Air/Oil/Water separator.
MDMT: 115°F @ 100 PSI
MAWP: 182 PSI @ 115°F
Nat’l Brd: 53401
OAD: 72" L X 32" W X 72"H
Langen Model B1, Semi-automatic, horizontal, continuous motion, hand load, hot melt glue cartoner, rated from 15 to 80 cartons per minute – depending on materials, application, machine configuration and operator dexterity. Carton size range: 1-3/4" to 12" long x 3/4" to 6" wide x 3-3/4" to 14" deep. Equipped with (4) chains adjustable set on 18" centers and 1" high x 2" long lugs, blank carton magazine, (2) head reciprocating vacuum carton pick n place, 9′ long load area, carton squaring rail, (2) gun hot melt glue systems with pattern controller, compression discharge and vacuum system with pump. Control panel with start machine jog, glue gun carton, vacuum pump, controls with e-stop. Tilt-able frame for gravity assist product loading. Mounted on base frame with barrier guarding and leveling legs.
OAD: 300"L x 58"W x 72"H
New England Model NEHBT750AJ, automatic, stainless steel, plastic bulk bottle unscrambler, rated from 50 to 625 container per minute – depending on materials and application. Container size: 3/4" to 8-1/2" in Diameter; up to 13" in Height and is capable of handling a wide variety of sizes and shapes including round, square, oval, straight wall, and handled containers (with proper change parts). Equipped with 72" OD sorting bowl, non scuffing nylon faced transfer, oritentaion and discharge belts, with clear hinged safety doors. Control panel has A/B CPU controls with start, stop and e-stop push button controls. Stainless steel product feed hopper with 60" long x 57" wide x 36" high product hopper and 93" long x 34" wide inclined feed belt with 4" high cleats on 14" centers.
OAD: 108" L x 90" W x 94" H Unscrambler
108" L x 60" W x 100" H Feed Hopper
Stainless steel, 2 station capper rated from 40 to 120 cpm – speeds depending on materials and application. Cap size range of: 10mm – 70mm. Equipped with a 93"L x 4 1/2"W conveyor, cap hopper, cap sorting disc cap chute and barrier guarding with interlock.
OAD: 98"L x 45"W x 93"H
Low capacity ingredient feeder capable of 80 to 900 gph of ice cream throughput. Has 3/4 cu.ft. stainless steel ingredient hopper with gentle mixing action, 3" dia x 12"H downstream product blender, 2 1/2" threaded O.D. inlet, 2 1/2" threaded I.D. outlet, spinning disc in hopper to meter ingredients into product stream, and rotary disc to mix product in product stream. Mounted on casters. Incorporates exact amounts of wet or dry ingredients into the finished ice cream.
OAD: 31"L x 24"W x 54"H
Low capacity ingredient feeder. Has 1/2 cu.ft. stainless steel ingredient hopper with gentle mixing action, 2 1/2" threaded O.D. inlet, 2" threaded I.D. outlet, spinning discs in hopper to meter ingredients into product stream, and rotary disc to mix product in product stream. Mounted on casters. Incorporates exact amounts of wet or dry ingredients into the finished ice cream.
OAD: 24"L x 32"W x 62"H
SXR, 500 gallon, jacketed mixing tank. 63" diameter x 90" straight wall, domed top, with 21" L x 17" W manway and top mounted prop agitator, has two 3" diameter top inlets with 2-3/4" flange, two 2" diameter top inlet with 3/4" flange and two 1" diameter top inlet with 2" flange. 304 stainless steel shell, full vacuum rated at 200psi @ 300F and carbom steel Jacket rated at 40psi @ 300F. Dish bottom with 3" diameter threaded center bottom discharge with 2-1/4" flange and 20" ground clearance and mounted on four legs.
OAD: 81"L x 81"W x 160"H
SXR, 500 gallon, jacketed mixing tank. 63" diameter x 90" straight wall, domed top, with 21" L x 17" W manway and top mounted prop agitator, has two 3" diameter top inlets with 2¾" flange, two 2" diameter top inlet with ¾" flange and two 1" diameter top inlet with 2" flange. 304 stainless steel shell, full vacuum rated at 200psi @ 300°F and carbon steel Jacket rated at 40psi @ 300°F. Dish bottom with 3" diameter threaded center bottom discharge with 2¼" flange and 20" ground clearance and mounted on four legs.
OAD: 81" L x 81" W x 160" H
28 Head, stainless steel, gravity pressure filler. Containers size: up to 5" in Diameter; up to 10-3/4" in Height. Equipped with screw to star wheel in feed, 5/8" nozzles set on 5-1/2" centers, with centering guides, no bottle / no fill and star wheel discharge. Conveyor track designed to integrate into existing convey system. Speeds dependant on materials and application.
OAD: 76"L x 75"W x 92"H
Stainless steel, inline cleated feeder with hopper. Equipped with 20 cu ft hopper, 14" wide cleated conveyor, 47" discharge, 10 by 1-1/2" cleates on 14 centers. Mounted on stainless steel frame wtih casters.
OAD: 130"L x 43"W x 52"H
Pack West, Automatic, stainless steel, 4-head rotary, chuck-style capper with number of containers per minute – depending on materials and application Cap size range: 10mm to 110mm, with proper change parts. Containers: up to 4-1/2" OD x up to 11" High. 16" pitch, 120" Long x 4-1/2" Wide table top conveyor, with wormscrew to starwheel in feed and discharge, 2 cu.ft. cap hopper with sorting wheel, 17" OD cap transfer disc, barrier guarding with electrical interlock and E-stop. Control panel has programmable controller, touch screen control panel, with neck supports, status indicator lights, no bottle / no cap sensor and individual clutch pressure and jaw pressure adjustments for each chuck. Mounted on stainless steel frame.
OAD: 124" L x 64" W x 96" H
Automatic, stainless steel, 4-head rotary, chuck capper capable of speeds from 40 to 120 caps per minute – depending on cap, container and configuration. Caps size: up to 120mm with correct change parts. Containers: up to 6 1/2" diameter. Equipped with 5" conveyor, worm screw to star wheel in feed, star wheel discharge, cap hopper, cap sorting disc with chute, cap to chuck transfer disc and four chuck stations. Mounted on stainless steel frame with adjustable feet.
OAD: 110"L x 43"W x 85"H