304 S/S, scrape surface heat exchanger with 7.8 sq. ft. of heat transfer area rated to 250psi @ 100F. Dual jacketed (jackets on both the inner and outer walls) design for cooling with direct expansion refrigerant, chilled water, or water / glycol mixture. Has 5/8" wide product annulus, 7" diameter x 40" high chamber, pump recirculated refrigeration system, Fischer actuator, insulated recirculation tubing, No. 4 sanitary finish on contact parts, automatic temperature controller, Moore valve service transducer, and variable speed rotor.
OAD: 44"L x 39"W x 95"H
ETC RM4000410, Double door, stainless steel, Hi-vacuum, air over pressure steam sterilizer, with amount of product per hour – depending on materials and application. 316L stainless steel contact parts, with internal chamber dimensions of: 96" in Length x 48" in Width x 54" in Height and has double, flow thru pneumatic powered, swing open locking chamber doors and capable of handling multiple product carts. 304 stainless steel outer shell and jacket rated to maximum 40psi @ 300 Deg F and minimum of -20 Deg F @ 82.5 psi and compressed air of 15scfm @ 100 psi internal steam and 15 gpm water used at 30 – 50 psi and steam at 850 lbs / hour @ 50 – 80 psi. Control panel has A/B PLC controller with touch pad controls and readout with push button controls. Mounted on heavy duty (4) leg frame.
OAD: 123" L x 88" W x 124" H
Automatic, stainless steel, 32-head, rotary, gravity / pressure filler rated 80 to 320 bottles per minute, depending material and application. Has 4 1/2" pitch, 5/8" diameter fill-to-level nozzles, wormscrew infeed, starwheel infeed / discharge, neck centering bells, 4"L x 4 3/8"W container platforms, and 100 gallon product hold tank. Mounted on stainless steel frame with height adjustable legs.
OAD: 57"L x 75"W x 80"H
Continental Can Model 450HCM-8, automatic, continous motion, 8 head can seamer rated from 100 to 600 cans per minute – depending on materials and application. Can size range: 202 to 404 in Diameter x 200 to 708 in Height, with proper change parts. Equipped with lugged chain in feed set on 5-1/4" centers, starwheel discharge, low lid sensor, no can sensor, no lid sensor, jam detection, driven rollers and steam injection. Mounted on common base frame. Change parts required to accommodate size range. Currently set for 208 diameter can.
OAD: 70" L x 58" W x 94" H
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, sweep arm reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
BTB Solutions LLC, Model REAPR, (rapidly employed palletizing system) with 6 axis, articulated, rotary joint, robotic, pic-n-place arm. The system has a Kawasaki RS080N robot arm with 24" long (4) suction cup end effector and has a stack height up to 79" with a maximum reach of 82" and maximum pick-up weight of 160 lbs. Capable of 3 pallet positions. Product infeed roller conveyor is 22" wide x 118" long with 2" diameter rollers set on 4" centers. Control panel has A/B PLC with A/B HMI panelview with step by step setup. (3) 2D area scanners provide 360 degree safety protection with (2) configurable zones (warning zone – slows the robot’s motion and stop zone – stops all motion). Mounted on heavy duty frame. Rates dependent on materials, application, environment, pattern configuration and type of end effector.
OAD: 74" L x 67" W x 80" H (Robot)
: 123" L x 34" W x 32" H (Conveyor)
Custom Powder Systems, 316 stainless steel, 336 liter tote / bin. Equipped with a 46" ID x 30" deep vessel, 46" diameter manway with clamp down cover, 10" diameter discharge with butterfly valve and 6" ground clearance. Mounted on heavy duty stainless steel forklift base.
Top Port:
(1) 2½"OD / 2"ID Tri-Clamp
Side Port:
(1) 4½"OD / 4"ID Tri-Clamp
OAD: 45"L x 54"W x 41"H
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8617
MAWP: 100 PSI @ 350°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(4) 1½" NPT
OAD: 130" L x 130" W x 262" H
DCI, 7,000 Gallon, 316 stainless steel, jacketed and insulated tank. Vessel Dimensions: 107" diameter x 184" straight wall. Equipped with dome top, slant bottom with bottom prop agitation powered by 2 Hp motor drive, 16" x 20" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2½" OD / 2" ID Tri-Clamp, 3" OD vent line, 3" OD / 2½" ID Tri-clamp style bottom side inlet and bottom side discharge.
Jacket Access:
(2) 2" SW Union Flange
MAWP: 150 PSI @ 100°F
MDMT: -20°F @ 150 PSI
OAD: 138" L x 115" W x 242" H
DCI, 7,000 Gallon, 316 stainless steel, jacketed and insulated tank. Vessel Dimensions: 107" diameter x 184" straight wall. Equipped with dome top, slant bottom with bottom prop agitation powered by 2 Hp motor drive, 16" x 20" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2½" OD / 2" ID Tri-Clamp, 3" OD vent line, 3" OD / 2½" ID Tri-clamp style bottom side inlet and bottom side discharge.
Jacket Access:
(2) 2" SW Union Flange
MAWP: 150 PSI @ 100°F
MDMT: -20°F @ 150 PSI
OAD: 138" L x 115" W x 242" H
DCI, 7,000 Gallon, 316L stainless steel, jacketed and insulated vessel. Vessel Dimensions: 107" ID / 114" OD: 184" straight wall. Equipped with dome top, 16" x 20" side bottom manway, side bottom prop agitation and slant bottom. Additionally features (2) thermowells, CIP spray ball supplied by a 2½" OD / 2" ID Tri-Clamp, 3" OD vent line, 3" OD / 2½" ID Tri-clamp style bottom side inlet and bottom side discharge.
Jacket Access:
(2) 2" SW Union Flange
MAWP: 150 PSI @ 100°F
MDMT: -20°F @ 150 PSI
OAD: 138" L x 115" W x 242" H
Mokon, Model DR4018AFW, 18 Kw, circulating water control system. Rated up to 300°F and 40 gallons per minute at 32 psi. Equipped with push button on / off, digital temperature control, 1" NPT inlet for water supply and 1½" NPT connections to and from process.
OAD: 36"L x 17"W x 28"H
