Shuttle Machines

Used Shuttle Equipment

Shutter blister machines are designed to seal a blister card to a blister. Blisters are plastic depressions that have been designed and formed to hold a product. Shuttle blister machines use tooling (shuttle) designed for the blister and blister card to shuttle the blister and card below the blister card sealing head. When the tooling for the blister shuttle machine is out from under the blister card sealing head, an operator can easily unload a sealed blister card and load the blister, product, and blister card into the tooling.

The operator then activates the blister card machine cycle, which shuttles the blister card tooling below the blister card sealing head where the blister card is sealed to the blister. Shuttle blister machines tend to be the simplest blister sealing machines, but generally have the lowest output.

Contact Us

Shuttle Equipment In Stock

Atlas Vac Blister Shuttle 1830

  • Manufacturer: Atlas Vac
  • Model Number: 1830
  • Frain Number: 5G5610

Atlas Vac, semi automatic, single shuttle blister sealer. Rated from 2 to 4 cycles per minute with number of product – depending on materials application and operator dexterity. Equipped with 18" x 30" sealing area and has sealing pressure up to 10,000 lbs at 80 psi. Control panel with platen seal heat, seal time and seal pressure controls, heat on / off switch and e-stop. Mounted on 4 leg base frame.

OAD: 53"L x 55"W x 58"H

Get a Free Quote Call: 630-629-9900