Cleaner Machines
Used Cleaner Equipment
Cleaner Equipment – Equipment related to the cleaning of equipment, or the cleaning of packaging such as containers and bottles. Cleaner equipment is designed to clean the interior or exterior of container or bottles prior to filling, or after filling and before labeling. Cleaner equipment can use air, de-ionized air, water, brushes, or a combination of methods to clean the interior or exterior of containers. Cleaner equipment is used to clean the interior of containers prior to filling them to eliminate contaminants. Cleaner equipment is used to clean the exterior of containers prior to labeling to remove any foreign matter from the container that would interfere with the adhesion of the label to the container.
Related Categories
Cleaner Equipment In Stock
Vector Cleaner CIP/COP WIP SYSTEM
- Manufacturer: Vector
- Model Number: WIP SYSTEM
- Frain Number: 5H0715
Vector, Model WIP System, portable, stainless steel, single tank, clean in place system Rated up to 0 to 20 gallons per minute – depending on materials and application. Equipped with 16" ID x 30" Deep, 25 gallon stainless steel, single wall holding tank with removable cover. Dish bottom has (1) 2" OD sanitary center bottom discharge with 16" floor clearance. System also includes Waukesha Model 20, 2 Hp product transfer pump with 1-1/2" OD top and 1-1/2" OD center in/outlet ports with cleaner and rinse flow meters. Control Panel has A/B controller with Panel view and start / e-stop controls. Mounted on 42" long x 32" wide stainless steel base frame with casters.
OAD: 42" L x 32" W x 57" H
Get a Free Quote Call: 630-629-9900
A K Robbins Cleaner Washer HYD
- Manufacturer: A K Robbins
- Model Number: HYD
- Frain Number: 5G2540
A.K. Robins, Model HYD, product hydrator and washer with amount of product per hour – depending on materials and application. Equipped with 144" long x 48" wide x 51" deep hydrator tank with 36" OD x 125" long perforated reel with 3/8" holes and powered by 1 Hp drive, 26" x 16" product charge, surface spray bar to move contaminates toward overflow, 9"OD / 4"ID 8-bolt flange overflow discharge, 21" wide x 14" long product discharge chute with 70" ground clearance, (1) 7½"OD/3"ID 4-bolt water supply, (1) 6"OD / 2"ID 4-bolt flange water supply, (2) 3½" od bottom side drains and (4) 12" x 12" manway access panels. Mounted on (8) leg frame.
Can be used to hydrate products or separate undersize buoyant particles.
OAD: 188"L x 60"W x 98"H
Get a Free Quote Call: 630-629-9900
A K Robbins Cleaner Washer FLOODWASH
- Manufacturer: A K Robbins
- Model Number: FLOODWASH
- Frain Number: 5G2539
A.K. Robbins, Flood style, agitated washing segment. Unit designed to e ffectively wash sand, dirt and other debris from buoyant products. 48" wide x 150" long x 14" deep wash bin equipped with removable bottom screens with ¼" diameter holes, (6) top mounted spray bars, (8) bottom mounted spray bars, (11) horizontal spray nozzles on the infeed end, 2¼ " piped water infeed to sprayers, (6) 6" high agitation paddles, (2) 3" bottom ports and (1) 11"OD/6"ID 8-bolt pattern flange fitting for flood overflow. Product removed by a 47½" wide x 145" long incline cleated belt with 2" high cleats on 12" centers and a discharge height of 100".
OAD: 284"L x 73"W x 138"H
Get a Free Quote Call: 630-629-9900