See us at the PMCA Show in Lancaster, PA on 4/15
Home » Cleaner » Page 2
Cleaner Equipment – Equipment related to the cleaning of equipment, or the cleaning of packaging such as containers and bottles. Cleaner equipment is designed to clean the interior or exterior of container or bottles prior to filling, or after filling and before labeling. Cleaner equipment can use air, de-ionized air, water, brushes, or a combination of methods to clean the interior or exterior of containers. Cleaner equipment is used to clean the interior of containers prior to filling them to eliminate contaminants. Cleaner equipment is used to clean the exterior of containers prior to labeling to remove any foreign matter from the container that would interfere with the adhesion of the label to the container.
Vanmark 6 roller, stainless steel, abrasive, scrubber, peeler rated up to 10,000 lbs of patatos per hour – depending on machine configuration. All stainless steel construction. Equipped with 68" long x 48" wide inner stainless steel product chamber has top flip-up cover and 36" long product in feed chute with (6) 68" long x 4" OD, abrasive and bristle type scrub brushes and water spray valves and is rated up to 27 gallons of water per minute maximum with roller speed of 100 rpm to 550 rpm. Cone bottom has 6" OD center bottom port with 12" floor clearence. Mounted on (4) leg stainless steel frame.
OAD: 108" L x 48" W x 65" H
Abec, 304 stainless steel Clean-in-place tank. Equipped with one tank measuring 21" L x 25" W x 16" H (35 gallons), level detector and 1½ hp centrifugal pump. Unit mounted on stainless steel platform with AB touch screen HMI
OAD: 77"L x 30"W x 74"H (tank cart) 50"L x 32"W x 93"H (HMI)
Ladish, Model 48-2412, (2) tank stainless steel CIP system. Equipped with (2) 38" OD x 48" High approx 230 gallon, single wall tanks. (1) for detergent, (1) for rinse and both have 18" ID top manways with flip up covers, bottoms have 3½" OD / 3"ID Tri-Clamp bottom discharges with 16" floor clearence, tube and shell heat exchanger, stainless steel piping with sanitary couplings flow and pressure control valves, (1) 7½ HP tri-clover centrifugal pump and (1) 1 HP Tri-Clover centrifugal pump. Control Panel has A/B PLC controller with A/B touch screen HMI. Mounted on stainless steel frame.
OAD: 134"L x 75"W x 84"H
Sani-Matic, Model (2) tank, Stainless steel, CIP system. Equipped with (2) 30" OD x 48" High (125 gallon), stainless steel, single wall tanks, (1) for detergent, (1) for rinse and both have 17" ID top manways with flip up covers, flat tops with (1)" and (2) 2-1/2" sanitary top ports, slant bottoms with 3" OD side bottom discharges with 17" floor clearance 6-1/2" OD x 64" long stainless steel tube and shell heat exchanger with MAWP of 130 psi shell and 150 psi tube @ 375°F and MDMT of shell and tube -20°F @ 150 psi and has a flanged front port with (8) 3/8" bolt holes on 3-1/4" centers, stainless steel piping with sanitary couplings flow and pressure control valves, side mounted centrifugal pump with 2" OD top and 3-1/4" OD front product ports. A/B PLC with touch pad. Mounted on (8) leg stainless steel frame.
OAD: 120" L x 48" W x 82" H
Vanmark 304 stainless steel hydrolift, destoner and rinser. Rated from 1,000 lbs/Hr to 25,000 lbs/Hr – depending on application and machine configuration. (2) function operation (1) to rinse product and remove sand, stone, or any other non-floatable materials, and (2) to elevate product using a vertical auger which creates constant speed and water turbulance. Equipped with 31" long x 48" wide x 26" deep stainless recieving hopper with 4" NPT bottom drain and (2) 4" NPT overflow ports, 15" diameter auger and 36" long discharge chute with 16" x 15" discharge port and 72" discharge height. Mounted on stainless steel base frame.
OAD: 60"L x 52"W x 114"H
CMI Equipment & Engineering Co. Model MNL stainless steel, trough style, high powered, multi noozle vegetable spray washer with pounds of product per hour – depending on materials and application. Equipped with 180" long x 32" wide x 28" deep slant bottom wash trough with 135" long x 3-1/2" OD threaded side water supply pipe and 1-1/2" end bottom drain port. (16) top, (11) on one side, (6) on the other side and (4) end, 2" wide high power spray noozles each with its own individual adjustment control lever. bottom recirculation basin and 67" long x 30-1/2" wide incline dewatering conveyor belt with 10 Hp centrifugal pump. Controll panel has start, stop, push buttons and speed control dial. Mounted on stainless steel base frame. Perfect way to wash fruits, radishes and leafy salad greens such as celery, broccoli, cauliflower, spinach, radicchio, romaine and spring mix.
OAD: 247" L x 54" W x 62" H
CMI Equipment & Engineering Co. Model MNL stainless steel, trough style, high powered, multi noozle vegetable spray washer with pounds of product per hour – depending on materials and application. Equipped with 180" long x 32" wide x 28" deep in feed to 3" deep discharge, slant bottom wash trough with 135" long x 3-1/2" OD threaded side water supply pipe and 1-1/2" end bottom drain port. (16) top, (11) on one side, (6) on the other side and (4) end, 2" wide high power spray noozles each with its own individual adjustment control lever. 67" long x 30-1/2" wide flex-link incline cleated dewatering conveyor belt with 1/2" high cleats set on 6" centers to a bottom 93" long x 35" wide x 26" deep stainless steel reculation basin with 10 Hp centrifugal pump. Controll panel has start, stop, push buttons and speed control dial. Mounted on stainless steel base frame. Perfect way to wash fruits, radishes and leafy salad greens such as celery, broccoli, cauliflower, spinach, radicchio, romaine and spring mix.
TS design Inc, Model Jetted Flume Washer is a stainless steel, jet spray destoner designed to wash and remove stones and sand from leafy product with pounds of product per hour – depending on materials and application. All 304 stainless steel construction with hydrosieve water filtration system that filters out particles 1/32" and larger. Equipped with 106" long x 32" wide x 22" deep wash trough with (7) 1/2" OD side mounted water jet spray nozzles set on 6" centers (7) each side and has 2-1/2" OD end bottom port. 64" long x 23" wide incline cleated product discharge conveyor with 20" wide x 1" high cleats set on 10" centers and 3/4 Hp top mounted motor drive with vari-speed controller and 71" discharge height. 68" long x 32" wide x 29" deep bottom solution trough with 2-1/2" OD end bottom port. Stainless steel 3 Hp centrifugal circulation pump with Pulse Instruments monitor and control sanitizer system for monitoring the Iwaki cleaning solution metering pumps, water faults and statis light with 3-1/2" / 2-1/2" PVC and 2-1/2" stainless steel piping. Mounted on all stainless steel base frame with start and stop push buttons. Operation: The product is placed into the washer trough and the spray jets force the produce forward and down into the water and hydrosieve filter removes unwanted particles from the circulating water in trough and product exits on incline cleated conveyor.
OAD: 192" L x 54" W x 82" H
Feldmeier, platform mounted, stainless steel, CIP system. Equipped with 36" OD x 45" Deep 200 gallon single wall 316 stainless steel holding tank with 2"ID overflow connection and 2½"OD / 2"ID Tri-clamp style water charge. Vessel discharges into Ampco, Model LCV520-252-21, centrifugal recirculation pump powered by 10 Hp motor drive. The pump brings fluid through a tube in shell heat exchange before discharging to a 3½" ID / 3" OD Tri-clamp CIP supply line. Control panel with an A/B PLC and PanelView touch screen HMI. Mounted on stainless steel platform style base.
Nat’l Brd: 4003MAWP: 150 PSI @ 350°F (Vessel)MDMT: -20°F @ 150 PSI (Vessel)MAWP: 150 PSI @ 350°F (Jacket)MDMT: -20°F @ 150 PSI (Jacket)
OAD: 96"L x 65"W x 108"H
Franken, stainless steel, rotary dewatering screen, with amout of product per hour – depending on materials and application. Equipped with 36" ID x 31" long stainless steel rotary drum with dewatering screen and flip-up cover has 54" drum inlet and outlet height with stainless steel trough on stand. Side bottom Tri-Clamp style discharge with 2½" OD / 2" ID with 27" ground clearence. Mounted on (4) leg base frame.
OAD: 109" L x 85" W x 76" H
Franken, stainless steel, perforated rotary washer, with amount of product per hour – depending on materials and application. Equipped with 31" ID x 54" long stainless steel rotary drum section with 1" ID perforations and top spray bar supplied by a 1" NPT fitting. Mounted on 4 leg base frame with a 81" infeed and 63" discharge.
OAD: 73" L x 60" W x 108" H
C. A. Neubecker, Model Versorgungseinheit, 3 tank, 304 stainless steel, CIP system. Equipped with (3) 39" long x 27" wide x 20" deep stainless steel 90 gallon tanks, (1) for caustic, (1) for acid and (1) for sanitizer. All have 22" long x 18" wide top lift off covers, flat tops and slant bottoms, side bottom discharges, top return ports, (3) 3 Hp centrifugal pumps, 1½" OD / 1¼" ID stainless steel piping with sanitary couplings, and metering pumps. Mounted on heavy duty stainless steel base frame.
OAD: 98" L x 55" W x 67" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.