Meat Machines

Carruthers Equipment Co Meat Equipment 5100-1D

• Manufacturer: Carruthers Equipment Co
• Model Number: 5100-1D
• Frain Number: R30649

Marlen Meat Equipment Stuffer 629 1042

• Manufacturer: Marlen
• Model Number: 629 1042
• Frain Number: 5H4677

Marlen Model 629, stainless steel, twin piston pump capable of pumping up to 12,000 lbs of products per hour – depending on materials and application. Equipped with twin pistons 6" OD x 14" stroke with flip up safety guarding and dual 5" OD, 4" ID discharge ports to single outlet discharge head. Stainless steel 46" ID x 40" Deep flip open product hopper. Control panels have A/B PLC with speed, high pressure and pump pressure controls with system guages and cylinder lift up / down, product open, pressure speed continous meter and high, low mode control switches with open, start, stop, and e-stop push buttons. Mounted on stainless steel base frame with casters.

OAD: 103" L x 48" W x 70" H

Marlen Meat Equipment Stuffer 629 1042

• Manufacturer: Marlen
• Model Number: 629 1042
• Frain Number: 5H4671

Marlen Model 629, stainless steel, twin piston pump capable of pumping up to 12,000 lbs of products per hour – depending on materials and application. Equipped with twin pistons 6" OD x 14" stroke with flip up safety guarding and dual 5" OD, 4" ID discharge ports to single outlet discharge head. Stainless steel 46" ID x 40" Deep flip open product hopper. Control panels have A/B PLC with speed, high pressure and pump pressure controls with system guages and cylinder lift up / down, product open, pressure speed continous meter and high, low mode control switches with open, start, stop, and e-stop push buttons. Mounted on stainless steel base frame with casters.

OAD: 103" L x 48" W x 70" H

Marlen Meat Equipment Stuffer 670 RBLD

• Manufacturer: Marlen
• Model Number: 670 RBLD
• Frain Number: 5H4673

Marlen Model 670, stainless steel, twin piston pump capable of pumping up to 18,000 lbs of products per hour – depending on materials and application. Equipped with twin pistons 7" OD x 14" stroke with flip up safety guarding and dual 5" OD, 4" ID discharge ports to single outlet discharge head. Stainless steel 46" ID x 40" Deep flip open product hopper. Control panels have A/B PLC with speed, high pressure and pump pressure controls with system guages and cylinder lift up / down, product open, pressure speed continous meter and high, low mode control switches with open, start, stop, and e-stop push buttons. Mounted on stainless steel base frame with casters.

OAD: 103" L x 48" W x 70" H

Marlen Meat Equipment Stuffer

• Manufacturer: Marlen
• Model Number:
• Frain Number: 5H4676

Famco Meat Equipment Linker JY

• Manufacturer: Famco
• Model Number: JY
• Frain Number: 5H4720

Famco Model " JY " natural case linker rated from 0 to 75 feet per minute with number of product – depending materials, application and size of product being run. Product size range: twist links from 4" to 14" in Length (with proper change parts) Currently set for 6" links and adjusts automatically to different casing diameter up to 35mm. Continuous motion, chain driven, machine with roller mechanism and pincher assembly to hold fed stuffed casings thru load end and pincher closing assembly. Heavy duty, no-corrosive construction, for easy cleaning and is wear resistant. Mounted on (4) leg base frame with casters.

OAD: 70" L x 40" W x 48" H

Famco Meat Equipment Linker JY

• Manufacturer: Famco
• Model Number: JY
• Frain Number: 5H4721

Famco Model " JY " natural case linker rated from 0 to 75 feet per minute with number of product – depending materials, application and size of product being run. Product size range: twist links from 4" to 14" in Length (with proper change parts) Currently set for 6" links and adjusts automatically to different casing diameter up to 35mm. Continuous motion, chain driven, machine with roller mechanism and pincher assembly to hold fed stuffed casings thru load end and pincher closing assembly. Heavy duty, no-corrosive construction, for easy cleaning and is wear resistant. Mounted on (4) leg base frame with casters.

OAD: 70" L x 40" W x 48" H

Stephan Machinery Corp Meat Equipment Emulsifier HCHD30

• Manufacturer: Stephan Machinery Corp
• Model Number: HCHD30
• Frain Number: 5H2580

Stephan Machinery, Model HCHD30-II, stainless steel Mikrocut emulsifying processor. Rated from 2,645 to 9,920 lbs per hour – depending on materials, application and machine configuration. Equipped with 37" long x 28" wide x 15" deep product hopper, feed auger into cutting set and a 3¾" OD / 2¾" ID seated bevel discharge. Knives and auger powered by 40 Hp drive. Mounted on a stainless steel pull cart base with casters.

OAD: 80"L x 44"W x 47"H

Nothum Meat Equipment Batter, Breader machine FD24

• Manufacturer: Nothum
• Model Number: FD24
• Frain Number: 5H3784

Nothum, Model FD-24, stainless steel, rotary barrel breader with number and pounds of product per hour – depending on materials and application. Equipped with a 26" wide x 45" long wire infeed belt with waterfall breadding applicator, 32" in diameter x 48" long tumbler, 26" wide x 64" long shaker discharge conveyor and 12" wide clump sifting conveyor. Complete with quick-connect hose for the supply-side hydraulic header and is setup to receive hydraulics from a plant power pac and distribute to various hydraulic motors. Mounted on stainless steel base frame.

OAD: 165"L x 60"W x 81"H

Formax Meat Equipment POWERMAX 4000

• Manufacturer: Formax
• Model Number: POWERMAX 4000
• Frain Number: 5H3927

Formax Model Powermax 4000, high speed, all stainless steel, 4 cavity, bulk product slicer capable of slicing, shaving, shingling and stacking meat productcs up to 1440 slices per minute (4 lanes) or 360 slices per lane – depending on materials, application and operator dexterity. Equipped with (4) 40" long bulk product holders / feeders that can be run with a back clamp or loaded continuously while machine is in operation. Blade speeds from 700 rpm round blade to 1500 rpm involute blade and has a loaf slicing throat of 8" high x 18-1/2" in width and slice thickness from .010" to 3" depending on blade speed. Control panel has 15" touch pad controller with start / stop and e-stop and (4) independent product holder drives, scales and classifiers, tooless disassembly and easy clean up. Mounted on all stainless steel base frame with height adjustable legs and 74" long x 48" wide (4) belt discharge conveyor.

OAD: 156" L x 67" W x 91" H Formax Slicer
74" L x 48" W x 43" H Discharge Conveyor

Nothum Meat Equipment Batter, Breader machine FD24

• Manufacturer: Nothum
• Model Number: FD24
• Frain Number: 5H3783

Nothum, Model FD-24, stainless steel, rotary barrel breader with number and pounds of product per hour – depending on materials and application. Equipped with a 26" wide x 45" long wire infeed belt with waterfall breadding applicator, 32" in diameter x 48" long tumbler, (2) 26" wide x 24" long flipping conveyors, 26" wide x 50" long shaker discharge conveyor and 12" wide clump sifting conveyor. Complete with quick-connect hose for the supply-side hydraulic header and is setup to receive hydraulics from a plant power pac and distribute to various hydraulic motors. Mounted on stainless steel base frame.

OAD: 180"L x 60"W x 80"H

Stephan Machinery Corp Meat Equipment Emulsifier MCH20

• Manufacturer: Stephan Machinery Corp
• Model Number: MCH20
• Frain Number: 5H2581

Stephan Machinery, Model MCH20, stainless steel Microcut emulsifying processor. Rated from 0 to 2645 lbs per hour – depending on materials, application and machine configuration. Equipped with 5"OD / 3¾"ID I-Line style charge port, feed auger into cutting set and a 2½" OD / 1¾" ID I-Line discharge. Knives and auger powered by a 20 hp drive with on / off switch.

OAD: 37"L x 25"W x 46"H