Ross, 7½ gallon capacity (5 gallon working capacity), 316 stainless steel insulated and jacketed tank. Vessel dimensions: 13½" ID with 12" straight wall. Equipped with a clamp down cover, top mounted ½ HP prop agitator and self contained heated jacket. Dish bottom with 1½" tri-clamp discharge with 29" ground clearance. Control panel with heater on / off switch, digital readout for product / jacket temperatures and touch screen HMI for mixer.
Top Ports:
(1) 2½"OD / 2"ID Tri-clamp
OAD: 40"L x 24"W x 68"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 60" ground clearance. Change parts required to accomodate application range.
OAD: 47"L x 45"W x 101"H
Urschel, Model CC-D, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3¾" in any dimension. Equipped with stainless steel feed hopper with 8" feed throat and discharge chute with 43" ground clearance. Change parts required to accomodate application range.
OAD: 60"L x 46"W x 72"H
Lee, model 10CHD9MT, 10 gallon, 316 stainless steel, open top, variable speed, double motion, jacketed kettle. Vessel dimensions: 17" diameter x 14½" deep with a 48½" infeed height. Equipped with hydraulic tilt up bridge mounted double motion scrape and counter rotation agitation (powered by 1½ Hp drive), 1½" Tri-clamp discharge with a butterfly valve at 26" ground clearance and vessel tilt out with a 30" discharge height. AB PLC with touchscreen HMI, and chart recorder. Mounted on stainless steel tubular frame on castors.
Jacket Fittings:
(2) 1" NPT
(1) 1" NPT drain
National Board: 4885
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI
OAD: 83" L x 52" W x 68" H
Silverson, Multimill (multishear mill), 316 stainless steel, inline, high shear mixer. Rates dependant on materials, application and machine configuration. 4 zone stator dimensions: 1st zone has 5" ID, 2nd zone has 7" ID, 3rd zone has 9" ID, 4th zone has 11" ID. Equipped with 3" ID / 7¼" OD flange infeed, 3" ID / 7¼" OD flange discharge, powered by a 100 hp drive. Mounted on a painted base.
OAD: 72" L x 48" W x 35" H
Patterson Kelley, Model 50 ft³, 304 stainless steel, twin shell mixer. Rated up to 55 lb/ft³. Equipped with (2) 17½" bolt down manways each with a 2½" Tri-clamp, (2) 62" long side V-walls and (2) 24" long inner V-walls with (2) 42" diameter chambers, 12" butterfly valve discharge with 53" ground clearance, shell rotation powered by a 5 hp drive. Requires 180" ceiling clearance with 63" swing radius / 126" swing diameter and 116" high swing axis. Mounted on painted base.
OAD: 157" L x 50" W x 152" H
J.C. Pardo & Sons, 30 gallon working capacity (40 gallon capacity total), 304 stainless steel, variable speed, triple motion, jacketed kettle. Vessel dimensions: 24" diameter x 24" deep with a 61" infeed height. Equipped with hydraulic tilt up bridge mounted triple motion scrape, paddle, and high shear agitators, scrape and paddle agitators powered by 7½ hp drive, high shear powered by 3 hp direct drive, lift up cover attached to tilt up bridge, hydraulic tilt up powered by 1 hp drive, 1½" Tri-clamp discharge with 17" ground clearance. Mounted on movable base with castors.
Side Ports:
(1) ½" Tri-clamp
Jacket Fittings:
(4) 1" NPT
Nat’l Brd: 580
MAWP: 45 PSI @ 293°F
OAD: 68" L x 42" W x 101" H
Cornell, Model D-8, 316 stainless steel, variable speed, versator. Rated from ¼ to 2 gallons per minute and disc rotation from 2000 to 6000 rpm – depending on materials and application. Equipped with 8" OD disc and has ¾" ID Tri-Clamp product in / outlet, top vacuum port, and bottom drain, clear glass quick release cover. Product flows through a film-forming ring out and over the surface of the rotating disc at which time the dispersion / deaeration action occurs. Control panel has mixer and vacuum controls with e-stop. Mounted on painted cart.
OAD: 50"L x 31" W x 41" H
Ross, model HSM-410, 304 stainless steel, inline, high shear mixer. Rated up to 240 GPM. Rates dependant on materials, application and machine configuration. Equipped with 2" Tri-clamp infeed, 2" Tri-clamp discharge and powered by a 10 hp drive.
OAD: 38" L x 17" W x 32" H
A&B Process systems, model 100 Gallon, 316 stainless steel, double motion, jacketed processor tank. Vessle Dimensions: 30" ID x 40" deep with a 64½" infeed height. Equipped with bridge mounted double motion scrape and paddle agitator, scrapers powered by a 1 HP drive and paddles powered by a 1 HP drive, lift up manway, 1" tri-clamp style discharge with butterfly valve and 18½" ground clearance. Control panel with AB PLC and touchscreen HMI.
Top Fittings:
(1) 1½" Tri-Clamp
Jacket Fittings:
(2) 1¾"ID 5"OD flange
Nat’l Brd: 10444
MAWP 150 PSI @ 366°F (jacket)
MDMT: -20°F @ 150 PSI (jacket)
OAD: 69" L x 32" W x 89" H
Patterson Kelley, model 1 ft³, 316 stainless steel, jacketed, vacuum, twin shell mixer/dryer. Rated up to 100 lb/ft³. Equipped with (2) 11" boltdown manways, (1) manway lid with vacuum gauge , (2) 17" long side V-walls, (2) 8" long inner V-walls, (2) 11" diameter mixing chambers, 6" butterfly valve discharge with 34" ground clearance, liquid/solids bar powered by a 5 hp drive, shell rotation powered by a ¾ hp drive. Requires 72" ceiling clearance with a 19" swing radius / 38" swing diameter and 51½" high swing axis.
Jacket ports:
(1) ¾" NPT
(2) 1" NP
Nat’l Brd: 63247
MAWP(vessel): Full Vac PSI @ 250°F
MDMT (vessel): 20°F @ F / V
MAWP (Jacket): 30 PSI @ 250°F
MDMT (Jacket): 20°F @ 30 PSI
OAD: 78" L x 45" W x 70" H
MGS, model Topserter ll, 304 stainless steel, high speed, 2 head rotary, pick and place coupon feeder rated up to 120 cycles per minute in random mode – depending on materials and application. Product size range: 1.12" to 2" in Width; 1.12" to 2" in Height and 0.06" to 1" thick with 2 heads. Equipped with 98" long x 1½" wide x 1" high single coupon magazine, 2-head rotary vacuum suction cup pick n place, Nordson H/M, vacuum pump, siko guages and is hand crank adjustable. Control panel with on/off and e-stop push button controls. Mounted on "H" style base frame with safety guarding, casters and leveling legs.
OAD: 129" L x 45" W x 76" H
