ABC Machines


ABC Machines In Stock

ABC Case Erector Tape 330T

  • Manufacturer: ABC
  • Model Number: 330T
  • Frain Number: 5H6440

ABC, Model 330T, automatic case erector and bottom tape sealer with number of cases per minute – depending on materials and application. Case size range; 7" to 22" in Length; 5¾" to 16" in Width; 7" to 22" in Height. KD dimmensions: 12" to 38" in Length; 8" to 29¼" in Width both (RSC) and (HSC) cases. Equipped with 64" long (2) belt easy load automatic blank case magazine, suction cup case pick and place with suction cup case erector, major and minor flap closers, walking beam case transfer, 48" long x 2½" wide dual upper and lower case belt drive transports thru 2" tape head. Control panel has A/B Micrologix controller with A/B panelview touch pad controls, statis light bar, light curtain and e-stop push buttons. Mounted on heavy duty frame with flip-up safety guarding.

OAD: 154" L x 60" W x 72" H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Glue 500

  • Manufacturer: ABC
  • Model Number: 500
  • Frain Number: 5F4100

ABC Model 500, automatic, continuous motion, hot glue, case erector and bottom sealer, rated from 20 to 55 cases per minute – speeds depending on materials and application. Knock down case size: 14-1/4" to 29-3/4" in Length; 12-1/4" to 26" in Width. Equipped with a 32" long blank case magazine, reciprocating vacuum pick and place, lugged chain carrier system set on 32" centers, top squaring conveyor, minor and major flap closers, two compressing rams, hot melt glue system, and interlocking Lexan guarding.

OAD: 180" L x 84" W x 68" H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 436

  • Manufacturer: ABC
  • Model Number: 436
  • Frain Number: R30520

ABC Model 436, automatic, continuous motion, top case closer and sealer can be used with hot melt glue and is rated from 10 to 75 cases per minute – depending on materials and application. Capable of handling both RSC, CSSC cases. Case size range: 8" to 24" in Length; 6" to 17" in Width; 4" to 17" in Height (glue), 16" in Height (tape). Equipped with 112" long x 8" wide belt case transfer conveyor with rotary top flap closers and currently set up with Nordson ProBlue hot melt glue systemand has 52" long top, dual side x side 2" wide roller no crush compression section. Remote control panel has A/B servo drive controls with A/B powerflex vari-speed controller, glue / tape and on / bypass / off switches with start / restart and e-stop push buttons. Mounted on stainless steel base frame, with flip up interlock safety door guarding and statis light bar.

OAD: 168" L x 80" W x 72" H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Taper 30T

  • Manufacturer: ABC
  • Model Number: 30T
  • Frain Number: R14811

Fully Automatic s/s tape -Top & Bottom Case Sealer Is Capable Of Up To 35 Cases Per Minute. Has A Fully Adjustable Case Size Range: (Length) 8"- 25-1/8" (Width) 6"- 16"; (Height) 4-1/2"- 18". Includes Plexiglass Enclosures, Indexer, power infeed belt and adjustable rollers.

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Taper 36T

  • Manufacturer: ABC
  • Model Number: 36T
  • Frain Number: 5B8294

Fully Automatic Tape Top Case Sealer Is Capable Of Up To 35 Cases Per Minute. Has A Fully Adjustable Case Size Range: (Length)10" – 22" (Width) 6"- 17"; (Height) 4"- 17". Includes Plexiglass Enclosures, Manual Hand Crank, Powered Infeed Belt, Stainlees Steel Construction And Adjustable Rollers.

Get a Free Quote Call: 630-629-9900

ABC Case Erector Glue 230HM

  • Manufacturer: ABC
  • Model Number: 230HM
  • Frain Number: 5H2942

ABC, Model 230HM, automatic, case erector, hot melt glue, bottom sealer. Rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 22¾" in Length; 5¾" to 16" in Width; 3" to 15" in Height. Equipped with 60" long automatic blank case magazine, suction cup pick and place, lugged walking beam case in feed and suction cup case erector, lugged walking beam case transfer with Nordson hot melt glue system, major and minor flap closers and single ram arm compression section. Control panel has start / e-stop push buttons controls and vacuum on / off switch. Mounted on heavy duty base frame.

OAD: 187" L x 86" W x 75" H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 36

  • Manufacturer: ABC
  • Model Number: 36
  • Frain Number: 5F6774

ABC Model 36, automatic, hot melt glue, top case sealer rated from 10 to 35 cases per minute – depending on materials and application. Case size range: 10" to 22" in Length; 6" to 17" in Width; 4" to 17" in Height. Equipped with 120" long x 28" wide belt and roller case transfer conveyor with top flap closing plows and rear flap tuckers, hot melt glue system, 24" long top and bottom compression discharge and lexan saftey guarding.

OAD: 132" L x 48" W x 65 "H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 36

  • Manufacturer: ABC
  • Model Number: 36
  • Frain Number: 5F6775

ABC Model 36, automatic, hot melt glue, top case sealer rated from 10 to 35 cases per minute – with speeds depending on materials and application. Case size range: 10" to 22" in Length; 6" to 17" in Width; 4" to 17" in Height. Equipped with 120" long x 28" wide belt and roller case transfer conveyor with top flap closing plows and rear flap tuckers, hand crank adjustable, with hot melt glue system (needs hot melt) 24" long top and bottom compression discharge, start / stop buttons and is mounted on painted steel base frame, with flip up lexan saftey door guarding.

OAD: 120" L x 48" W x 65 "H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Tape 130T

  • Manufacturer: ABC
  • Model Number: 130T
  • Frain Number: 5F6772

ABC Model 130T, automatic, case erector, bottom tape sealer. Case size range: 7" to 22-3/4" in Length; 5-3/4 – 16" in Width; 3 to 22" in Height. Knockdown size range: 12" to 38" in Length; 8" to 29-1/4" in Width for both RSC and HSC cases. Equipped with 72" long large capacity, easy load automatic blank case magazine, suction cup gripper case erector, major and minor flap closers, walking beam case transfer, 48" long x 2-1/2 wide dual upper and lower case belt drive transports through tape head. Control panel with A/B PLC and Electro Cam 5000 touch pad controller with readout, e-stop buttons and interlock safety guarding. Speeds dependant on materials, application and machine configuration.

OAD: 192" L x 60" W x 80" H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Glue 130

  • Manufacturer: ABC
  • Model Number: 130
  • Frain Number: 5F6773

ABC, Model 130, automatic case erector bottom sealer rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 22¾" in Length; 5¾ – 16" in Width; 3 to 22" in Height. Knockdown size range: 12" to 38" in Length; 8" to 29½" in Width for both RSC and HSC cases. Equipped with automatic blank case magazine, suction cup pick and place, self-adjusting, spring loaded suction cup gripper case erector, hot melt glue system, major and minor flap closers, walking beam case transfer, 48" long x 2-1/2 wide dual upper and lower case belt drive.

OAD: 140"L x 52"W x 75"H

Get a Free Quote Call: 630-629-9900

ABC Case Packer Side Load Caser SP19

  • Manufacturer: ABC
  • Model Number: SP19
  • Frain Number: 5G7774

ABC, Model SP19, semi-automatic, case packer. Case size range: 7" to 19.5" in Length; 6" to 16" in Width; 4.5" to 18" in Height. Equipped with 8" wide powered in feed conveyor, carton accumulation section, up stack, pneumatic product transfer and automatic full case lowering onto integrated take away conveyor. Mounted on casters. Rate / Speed dependant on materials, application, machine configuration and operator dexterity.

OAD: 102"L x 60"W x 74"H

Get a Free Quote Call: 630-629-9900

ABC Case Erector Tape 330T

  • Manufacturer: ABC
  • Model Number: 330T
  • Frain Number: R26920

ABC, Model 330T, automatic case erector and bottom tape sealer. Rated from 10 to 30 cases per minute – depending on materials and application. Case size range; 7" to 22¾" in Length; 5¾" to 16" in Width; 7" to 22" in Height, with KD dimmensions of: 12" to 38" in Length; 8" to 29¼" in Width both (RSC) and (HSC) cases. Equipped with a 64" long x 13" wide easy load automatic blank case magazine, suction cup pick and place with self-adjusting spring loaded suction cups, suction cup case erector, major and minor flap closers, walking beam case transfer, 45" long x 2½" wide dual upper and lower case belt drive transports thru 2" tape head and Siko gages. Control panel with Koyo controller, touch screen controls and e-stop buttons with interlock gull-wing safety guarding.

OAD: 200" L x 70" W x 76" H

Get a Free Quote Call: 630-629-9900