Alfa Laval Machines


Alfa Laval Machines In Stock

Alfa Laval Heat Exch Scrape Surface 6 X 6

  • Manufacturer: Alfa Laval
  • Model Number: 6 X 6
  • Frain Number: 5G9747

Alfa Laval, Model Contherm, (2) vertical, scrape surface heat exchangers with amount of product per hour – depending on materials and application. Equipped with 6 ft² of heat transfer area each cylinder, (2) 10 hp drives, 2½"OD / 2"ID I-Line style product connections and 1½" NPT media connections each cylinder.

MAWP: 300 psi @ 300°F (Product)
MAWP: 250 psi @ 300°F (Media)

OAD: 53"L x 48"W x 133"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Pump Positive GHP220

  • Manufacturer: Alfa Laval
  • Model Number: GHP220
  • Frain Number: 5B0702

GH Products Corp, Model GHP-220, positive displacement pump with stainless steel contact parts. Rated up to ___ gallons of product per minute – depending on materials, application and machine configuration. Equipped with 2" OD / (7/8)" ID Tri-clamp style product charge / discharge with 12" ground clearance. Powered by a 1 hp drive with a 20.59:1 gearbox and variable speed control for a rate of ___ to ___ GPM. Unit mounted on push cart base with locking casters.

OAD: 54" L x 28" W x 41" H

Get a Free Quote Call: 630-629-9900

Alfa Laval Homogenizer 2 Stage 2500GPH

  • Manufacturer: Alfa Laval
  • Model Number: 2500GPH
  • Frain Number: 5H3606

Alfa Laval, stainless steel (2) stage, homogenizer. Rated output capacity up to 2500 gallons per hour – depending on materials, application and machine configuration. Maximum operating pressure up to 3,000 psi. Equipped with 2 stage hydraulic homogenizing valve actuator assembly and pressure gauge up to 10,000 psi.

OAD: 60"L x 50"W x 55"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Heat Exch Scrape Surface 6X9

  • Manufacturer: Alfa Laval
  • Model Number: 6X9
  • Frain Number: 5H3310

Alfa Laval, Model 6 x 9 Contherm, vertical, scrape surface heat exchanger system has (3) 72" x 9" stainless steel tubes, with amount of product per hour each tube – depending on materials and application. Equipped with 9 ft² of heat transfer area each tube, with a working temperature range of -30 to +300 Deg F, with top mounted motor drives and 2-1/2"OD / 1-3/4" ID product inlet and outlet ports each cylinder. Main top mounted control panel and individual controllers for each tube has motor, speed and temperature start, stop controls with readout and also CIP system controller with start, stop, and e-stop controls. Each mounted on individual pedistal style stainless steel stands. Product enters the cylinder through the lower port and flows upwards through cylinder simultaneously, and media travels in a countercurrent flow through the narrow channel and rotating blades remove product from cylinder wall to ensure uniform heat transfer to the product and is ideal for food products as well as other applications.

Product Chamber: MAWP: 300 psi @ 300°F
Media Chamber: MAWP: 250 psi @ 300°, MDMT: -30°F @ 100 psi

OAD: 80" L x 72" W x 209" H

Get a Free Quote Call: 630-629-9900

Alfa Laval Pump Centrifugal 9634080623

  • Manufacturer: Alfa Laval
  • Model Number: 9634080623
  • Frain Number: 5H1694

Alfa Laval, Model 9634080623, stainless steel centrifugal pump. Rated from 50 to 600 gallons per minute with a head of 45 to 100 feet – depending on materials, application and machine configuration. Pump head equipped with a 4¾"OD / 3¾"ID Tri-clamp style suction infeed and a 3½"OD / 3" ID Tri-clamp style delivery discharge. 250mm diameter impeller is driven by a 20 hp motor.

OAD: 33"L x 21"W x 21"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Heat Exch Plate M10

  • Manufacturer: Alfa Laval
  • Model Number: M10
  • Frain Number: 5H1177

Alfa Laval, Model M10, stainless steel, plate and frame heat exchanger. Approx 350 total ft² heat transfer area with a flow rate of 1 to 45 gallons per minute – depending on materials, application and machine configuration. Equipped with (105) plates 35" in Length; 14" in Width; in (1) zone. (4) 4¾" OD / 3¾" ID Tri-clamp style transfer ports with a maximum working pressure of 87 psi and a maximum operating temperature of 230° F – depending on gasket material. Mounted on stainless steel base frame.

OAD: 55"L x 18"W x 39"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Heat Exch Scrape Surface 6X9

  • Manufacturer: Alfa Laval
  • Model Number: 6X9
  • Frain Number: 5G8002

Alfa Laval, Model Contherm 6 x 9, stainless steel scrape surface heat exchanger with lbs of product per hour – depending on materials and application. Equipped with vertical mounting post, hydraulic tube lift, 6" diameter x 72" long stainless steel product chamber (9 ft²) of heat transfer area, stainless steel scraper blades powered by a 7½ hp drive, (2) 2½" OD / 2"ID tri-clamp style sanitary product connections and (2) 2" NPT media connections.

Product Chamber: MAWP: 300 psi @ 300°F
Media Chamber: MAWP: 250 psi @ 300°F
MDMT: -30°F @ 100 psi

OAD: 42"L x 16"W x 138"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Centrifuges WSB103B-34-60

  • Manufacturer: Alfa Laval
  • Model Number: WSB103B-34-60
  • Frain Number: R24270

Alfa Laval Model WSB purifier, is a continuous, solid retaining centrifuge, separator capable of doing up to 900 liters or 225 gallons of product per hour – depending on materials and application. Machine is set up to separate two liquid phases with the solids remaining inside the bottom of the bowl. Equipped with three 10-1/4" ID by 2" H separation discs with a top 1-1/2" OD and a 1" ID threaded light and heavy product intakes ports, and 3/4" OD product separation outlet, each disc, this design of disc stack is the heart of the separator, and the centrifugal force separates the fluid / particles both are then discharged through separate outlets.

OAD: 22" L x 22" W x 30" H

Get a Free Quote Call: 630-629-9900

Alfa Laval Centrifuges MAB 103B24

  • Manufacturer: Alfa Laval
  • Model Number: MAB 103B24
  • Frain Number: R24220

Solids-retaining centrifugal continuous separator capable of up to 1150 liters/hr (300 gal/hr). Capable of seperating out solids, liquids, and sediments. Has 1hp drive and is mounted on a S/S frame with control box.

OAD: 52"L x 40"W x 68"H

Get a Free Quote Call: 630-629-9900

Alfa Laval Centrifuges NX20731S60HZ

  • Manufacturer: Alfa Laval
  • Model Number: NX20731S60HZ
  • Frain Number: 5E8987

Horizontal, solid bowl, decanter centrifuge rated up to 60 gph – depending on materials, application and machine configuration. All stainless steel sanitary wetted parts, 6" Diameter by 12" L bowl, pitched inner product scroll with flip up bolt down cover, 2-1/4" OD, 2" threaded ID front product feed port, 4900 rpm bowl speed, 7.5 Hp v-belt main drive, and 2 Hp variable speed back drive both with safety guarding, control panel. Mounted on a 54" long by 60" wide by 30" high base frame.

OAD: 60" L x 72" W x 62" H

Get a Free Quote Call: 630-629-9900

Alfa Laval Pump Centrifugal LKH45M160F4E25AAN

  • Manufacturer: Alfa Laval
  • Model Number: LKH45M160F4E25AAN
  • Frain Number: 5F8533

Alfa Laval Model LKH45M, all 316L stainless steel contact parts, large bore, horizontal, centrifuge pump rated from 125 to 1000 to gallons per minute – depending size motor, materials and application. Currently equipped with 20 Hp motor drive rated from 100 to 375 gallons per minute. Equipped with 7" diameter impeller with (5) 316L stainless steel compound curved vane blades, front 4-3/4" OD, 3-3/4" ID in feed port and top 3-1/2" OD, 2-3/4" ID adjusting angle discharge product port and is ideal for all types of applications with a wide range of temperatures from 14 to 284 Deg F, up to 145 psi maximum inlet pressures and designed for cleaning in place (CIP).

OAD: 32" L x 18" W x 15" H

Get a Free Quote Call: 630-629-9900

Alfa Laval Pump Centrifugal LKH45M160F4E25AAN

  • Manufacturer: Alfa Laval
  • Model Number: LKH45M160F4E25AAN
  • Frain Number: 5F8532

Alfa Laval Model LKH45M, 316L stainless steel contact parts, large bore, horizontal, centrifuge pump rated from 125 to 1000 to gallons per minute – depending size motor, materials and application. Currently equipped with 20 Hp motor drive rated from 100 to 375 gallons per minute. Equipped with 7" diameter impeller with (5) 316L stainless steel compound curved vane blades, front 4-3/4" OD, 3-3/4" ID in feed port and top 3-1/2" OD, 2-3/4" ID adjusting angle discharge product port and is ideal for all types of applications with a wide range of temperatures from 14 to 284 Deg F, up to 145 psi maximum inlet pressures and designed for cleaning in place (CIP).

OAD: 32" L x 18" W x 15" H

Get a Free Quote Call: 630-629-9900