See us at the PMCA Show in Lancaster, PA on 4/15
Home » Breddo » Page 2
Breddo, Model LDT, 50 gallon 304 stainless steel single wall liquefier. Chamber dimensions: 24" x 24" with a 22" straight wall. Equipped with an 18" diameter top man way with flip up bolt down cover, bottom 6 hole / 3 wing general purpose impeller and 3" OD / 2½"ID Tri-Clamp side bottom discharge with 29" floor clearence with bottom 10 Hp motor drive. Mounted on stainless steel (4) leg tubular frame.
OAD: 34"L x 26"W x 82"H
Breddo Model LOR, 100 gallon, stainless steel, jacketed, high shear liquefier with amount of product per hour – depending on materials and application. Equipped with 42" ID x 21" straight wall with 22" OD man way with flip top bolt down cover, (2) 2-1/4" OD threaded top sanitary ports. Full side and bottom jacket rated to 125 psi and has a temp rating up to 350 Deg F with (3) 2-1/2" OD threaded jacket ports. Bottom 10" OD 6 hole / 3 wing impeller with inside baffle and side mounted 50 Hp motor belt drive with bottom belt guarding and latch handles. Cone bottom has 2-1/2" OD / 2" ID side bottom butterfly discharge valve with 23" ground clearence. Control panel has a A/B Powerflex vari freqency controller with touchpad and temperature controls, start and e-stop push buttons. Mounted on stainless steel tubular style frame with casters.
OAD: 77" L x 60" W x 66" H
Breddo, Model LDT, 200 gallon 304 stainless steel liquefier. Chamber dimensions: 40" x 40" with 33" straight wall. Equipped with 24" OD top man way with flip up bolt down cover, (1) CIP spray ball supplied by a 2"OD / 1½"ID Tri-clamp fitting, bottom 6 hole / 3 wing general purpose impeller and 3" OD / 2½" ID sanitary side bottom discharge with 24" floor clearence, bottom 25 Hp motor drive. Mounted on stainless steel (4) leg tubular frame.
Top Access:(5) 2½"OD / 2"ID Tri-Clamp
OAD: 40"L x 40"W x 75"H
Breddo, Model LDDW, 250 gallon 304 stainless steel jacketed and insulated liquefier. Chamber dimensions: 45" x 45" with a 32" straight wall. Equipped with a 23" x 23" top man way with flip up cover, CIP spray ball supplied by a 2"OD / 1¼"ID Tri-clamp fitting, bottom 6 hole / 3 wing general purpose impeller, 2½" OD/2"ID Tri-Clamp side bottom discharge with 34" floor clearance and bottom two speed 25/12 Hp motor drive. Mounted on stainless steel (4) leg tubular frame.
Top Access:(1) 2½"OD / 2"ID – Tri-clamp(2) 2"OD / 1¼"ID – Tri-clamp
Jacket Rating:90 PSI @ 350 F
Jacket Access:(2) 1½" NPT
OAD: 59"L x 52"W x 90"H
Breddo, Model LDD, 250 gallon 304 stainless steel single wall liquefier. Chamber dimensions: 43" x 43" with 34" straight wall. Equipped with 18" diameter top man way with flip up bolt down cover, (3) 2½" OD / 2" ID and (1) 3½" OD / 3" ID tri-clamp style top inlet ports, (1) CIP spray ball, bottom 6 hole / 3 wing general purpose impeller and 3" OD / 2½" ID sanitary side bottom discharge with 20" floor clearence, bottom 25 Hp motor drive. Mounted on stainless steel (4) leg tubular frame.
OAD: 45" L x 45" W x 73" H
Breddo Model LORW, 50 gallon, 316L stainless steel, high shear, jacketed liquefier with amount of product per hour – depending on materials and application. Equipped with 32" ID x 20" straight wall with 13" sloped bottom, 18" ID man way with flip top bolt down cover, (2) 2-1/2" OD / 2" ID and (1) 2"OD / 1-1/2" ID top sanitary ports. 90 psi jacket with (2) 2" OD / 1-1/2" ID threaded jacket ports and side temperature gauge with 10" OD bottom 6 hole / 3 wing impeller and side mounted belt motor drive. Cone bottom has 3" OD / 2-1/2" ID side bottom discharge with 25" ground clearance. Control panel has speed pot dial, mixer start, stop and e-stop push buttons. Mounted on tubular style base frame.
OAD: 48" L x 36" W x 64" H
Breddo, Model LOR, 100 gallon, 316 stainless steel, single wall liquefier. Chamber dimensions: 41" OD with 24" straight wall. Equipped with 24" diameter top man way with flip up bold down cover, (3) 2½" OD / 2" ID tri-clamp style top inlet ports, bottom 6 hole / 3 wing / 6 blade impeller and 3½" OD / 3"ID tri-clamp style side bottom discharge with 17" floor clearence, side 40 Hp motor drive and mounted on stainless steel (6) leg tubular frame.
OAD: 75" L x 43" W x 65" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.