Crepaco Machines


Crepaco Machines In Stock

Crepaco Heat Exch Plate

  • Manufacturer: Crepaco
  • Model Number:
  • Frain Number: 5E0871

Plate and frame, S/S, heat exchanger. Has 80 plates measuring (14"W x 48"L). Equipped with (4) 3" OD triclover product ports and (8) 3" OD threaded media ports.

OAD: 42"L x 32"W x 64"H

Get a Free Quote Call: 630-629-9900

Crepaco Homogenizer 2 Stage 5DL425

  • Manufacturer: Crepaco
  • Model Number: 5DL425
  • Frain Number: 5H3880

APV Crepaco Multi-Flo, Model 5DL425, two stage, stainless steel, homogenizer rated at 2,500 gallons per hour – depending on material, application and machine configuration. Maximum operating pressure:1,800 psi. Two stage unit equipped with (5) stellite seat ball valves. 2-1/2"OD / 1-3/4"ID Seated bevel sanitary charge port and discharge port.

OAD: 70" L x 48" W x 69" H

Get a Free Quote Call: 630-629-9900

Crepaco Feeder

  • Manufacturer: Crepaco
  • Model Number:
  • Frain Number: 5D9453

Low capacity ingredient feeder. Has 1/2 cu.ft. stainless steel ingredient hopper with gentle mixing action, 2 1/2" threaded O.D. inlet, 2" threaded I.D. outlet, spinning discs in hopper to meter ingredients into product stream, and rotary disc to mix product in product stream. Mounted on casters. Incorporates exact amounts of wet or dry ingredients into the finished ice cream.

OAD: 24"L x 32"W x 62"H

Get a Free Quote Call: 630-629-9900

Crepaco Mixer Liquid Liquefier 50 GAL

  • Manufacturer: Crepaco
  • Model Number: 50 GAL
  • Frain Number: 5H2810

Crepaco, 50 gallon, 304 stainless steel jacketed and insulated liquefier. Chamber dimensions: 26" x 26" with 20" straight wall. Equipped with 18" diameter top man way with flip up bolt down cover, bottom 6 hole / 3 wing general purpose impeller, CIP spray ball supplied by a 2"OD / 1½"ID Tri-Clamp fitting, 2½" OD / 2" ID Tri-Clamp side bottom discharge with 25" floor clearance and bottom 20 Hp motor drive. Mounted on stainless steel (4) leg tubular frame with leveling pads.

Top Access:
(1) 3"ID Seated Bevel
(2) 2"ID Seated Bevel

Jacket Access:
(2) 1½" NPT

MAWP: 75 PSI

OAD: 36"L x 33"W x 60"H

Get a Free Quote Call: 630-629-9900

Crepaco Tank Processors 350 GALLON

  • Manufacturer: Crepaco
  • Model Number: 350 GALLON
  • Frain Number: 5F6753

Crepaco, 350 Gallon, jacketed, 304 stainless steel mix tank. Vessel Dimensions: 48" ID; 44" straight wall. Full side and bottom dimpled jacket rated at MAWP of 75 psi @ 350 Deg F; MDMT of -20 Deg F @ 75 psi. Equipped with dual hinged covers, bridge mounted side & bottom sweep agitator, 2" OD threaded jacket in/outlets, dish bottom with 3" OD center bottom discharge at 24" clearance. Mounted on four legs. National Board # 7375

OAD: 52" L x 48" W x 100" H

Get a Free Quote Call: 630-629-9900

Crepaco Tank Processors 300 GAL

  • Manufacturer: Crepaco
  • Model Number: 300 GAL
  • Frain Number: 5D3272

Crepaco, 300 gallon 316 stainless steel jacketed mix tank. 50" ID x 39" straight wall. Dome top has a 18"diameter man way.with sweep agitation, side baffle and CIP spray ball. Fully dimpled side / bottom low pressure jacket. Cone bottom with 3" center bottom discharge equipped with manual ball valve, and a 34 1/2" discharge height. Mounted on (4) stainless steel legs. Equipped with Dodge Hydraulic Motor.

OAD: 54" L x 54" W x 130" H

Get a Free Quote Call: 630-629-9900

Crepaco Mixer Paste Horizontal 42

  • Manufacturer: Crepaco
  • Model Number: 42
  • Frain Number: 5D0426

316 stainless steel 42 cu ft (2,650 lb or 320 gallons) USDA jacketed blender / cooker. Designed for gentle mixing and blending of delicate food products with the ability to heat or cool and direct pump out. Mixing chamber dimmensions of: 59" Long x 47" Wide x 47" Deep with a filp up counter balanced cover for easy opening and closing. 6" and 1-1/2" Diameter sanitary threaded top inlets and (2) side 2" dia tri clamp inlets and a 3" Diameter tri clamp sanitary center bottom discharge. Vessel can be used for batch processing or incorporated into continuous process system. Last used in the food industry.

OAD: 80" H x 60" W x 87" L
Aprox Shipping weight 1500 lbs

Get a Free Quote Call: 630-629-9900