See us at the PMCA Show in Lancaster, PA on 4/15
Home » Lee » Page 3
Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Jacket Ports: (2) 1½" NPT
Nat’l Brd: 14856MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 74"L x 59"W x 79"H
Nat’l Brd: 14854MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Lee, Model 150D9MS 150 gallon capacity, 316 stainless steel, jacketed double motion kettle. Rated to 150,000 cps. Vessel dimensions: 42" diameter x 39" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Nat’l Brd: 14852MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 64"L x 48"W x 77"H
Lee, Model 50U75, 50 gallon capacity, 316 stainless steel jacketed and vacuum process tank. Vessel dimensions: 30" diameter x 28" deep with a 16" straight wall and cone bottom. Equipped with a 2 Hp top mounted sweep agitator, 1 HP Prop agitator, 1½ hp high shear agitator and 2½" OD / 2" ID Tri-clamp style bottom discharge with pneumatic plug valve and 55" ground clearance. Mounted on (3) tube legs.
Top Ports:(1) 8½" OD / 7¾"ID Tri-Clamp(2) 4" OD / 3½" ID Tri-Clamp(6) 2" OD / 1½: ID Tri-Clamp
MAWP: 100 PSI @ 338°F (Jacket)MDMT: -20°F @ 150 PSI (Jacket)Nat’l Brd: 11178
Internal full vacuum rated
OAD: 48"L x 45"W x 90"H
Lee, Model 55 DP, 55 gallon total capacity, 316 stainless steel jacketed mixing tank with gallons of product per hour – depending on materials and application. Vessel dimensions: 20" ID x 40" deep straight wall. Equipped with flat top with clamp down cover, 0.33 hp prop agitation, side and bottom jacket. Dish bottom has 2" OD / 1½"ID Tri-Clamp style discharge with 18" ground clearance. Mounted on (4) stainless steel legs with locking casters.
Nat’l Brd: 11708MAWP: 100 psi @ 338°FMDMT of -20°F @ 100 psi.
Jacket Ports: (2) ¾" NPT
OAD: 40"L x 38"W x 83"H
Lee Model 50U7S, 316 stainless steel, 50 gallon, full jacketed, Internal vacuum rated, triple motion kettle with gallons of product per hour – depending on materials and application. Equipped with bolt down top cover with (1) center top mounted anchor style agitator and (1) off center top mounted turbine agitator and (1) off center top mounted prop agitator with full side and bottom jacket. Dish bottom has 6" OD sanitary center bottom discharge with 60" floor clearance. Mounted on (3) stainless steel legs.
Vessel Dimensions: 38" OD; 28" Deep
Jacket rated: MAWP 100psi @ 338°F; MDMT of -20°F @ 100psi.
Top Ports:(5) 2" OD Sanitary Ports(2) 3" OD Sanitary Ports(1) 8" OD Sanitary Manway
Bottom Port:(1) 6" OD Sanitary Discharge Port
Jacket Ports: (2) 1-1/2" OD Threaded Side Ports(2) 1-1/2" OD Threaded Bottom Ports
National Board: # 9798
OAD: 38" L x 38" W x 120" H
National Board: # 11177
Lee, Model 25D9MT, 25 gallon, 304 stainless steel jacketed kettle with amount of product per hour – depending on materials and application. Vessel Dimensions: 23" diameter x 20" deep with 10" straight wall. Equipped with tilt out bridge mounted scrape agitator powered by single ¾ Hp motor drive and 2½"OD / 2"ID Tri-Clamp discharge with 16" clearance to frame. Control panel with start, stop push buttons.
Jacket Fittings:(2) ¾" NPT
MAWP: 40 PSI @ 287° F Nat’l Brd: 3214
OAD: 60"L x 30"W x 68"H
Lee, 1000 gallon capacity, 316 stainless steel single wall mixing tank. Vessel dimensions: 66" diameter x 70" straight wall with dish style bottom. Equipped with 15" diameter top manway, paddle agitator and has 20" x 15" side bottom manway with flip open cover. Mounted on (4) legs with 3½" OD / 3" ID bottom discharge with butterfly valve and 15" ground clearance.
Top Ports:(1) 10" diameter open vent
OAD: 75"L x 68"W x 144"H
Lee, Model 55 CBT, 55 Gallon capacity, 316 stainless steel, single wall vacuum tank. Equipped with 28" ID x 28" deep vessel with 21" straight wall and has pneumatic tilt up cover. Cone bottom has 2"OD / 1½"ID tri-clamp style discharge with 17" ground clearance. Mounted on (4) stainless steel legs with casters.
Top Ports:(1) 10½"OD / 9¾" ID Tri-Clamp(1) 6½"OD / 5¾" ID Tri-Clamp(3) 3½"OD / 3" ID Tri-Clamp(2) 2"OD / ¾" ID Tri-Clamp
MAWP: 5 PSI / FV @ 227°F (Vessel)MDMT: -20°F @ 5 PSI / FV
OAD: 55"L x 50"W x 55"H
Lee, Model 100D7T, 100 gallon, 316 stainless steel jacketed and insulated double motion kettle. Vessel Dimensions: 36" diameter x 30" deep with 15" straight wall. Equipped with tilt out bridge mounted scrape surface agitation powered by a 1 hp drive and prop agitation powered by a ¼ hp drive, fixed baffle, 2"OD / 1½"ID Tri-clamp bottom discharge with 15" ground clearance. Mounted on (3) stainless steel legs.
MAWP: 90 psi @ 332°FMDMT: -20°F @ 90 PSINational Board: 12231
Top Access Ports:(3) 2½"OD / 2"ID Tri-clamp
Jacket Ports:(2) 1" NPT(1) ¾" NPT
OAD: 62"L z 43"W x 75"H
Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with stainless steel mezzanine, tilt out bridge mounted double motion scrape agitator powered by 30 Hp drive, high shear agitator powered by 60 Hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.
Jacket Fittings: 2" NPT
Nat’l Brd: 7577MAWP: 90 PSI @ 332° F (jacket)MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 118"L x 76"W x 202"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.