Lee Machines

Lee Kettle Single Motion 30GAL

• Manufacturer: Lee
• Model Number: 30GAL
• Frain Number: 5G0365

30 Gallon, 316 stainless steel, steam jacketed mixing kettle. Vessel dimensions: 16" inside diameter x 24" in depth product bowl, with top side mounted prop air mixer, jacket rated at MAWP of 90 psi @ 330°F, 1" OD threaded jacket ports and tilting discharge. Mounted on "A" frame base.

OAD: 48" L x 29" W x 53" H

Lee Kettle Double Motion 100CHD9MTI

• Manufacturer: Lee
• Model Number: 100CHD9MTI
• Frain Number: R38760

Lee, 100 gallon, 316 stainless steel, double motion, scrape surface, half jacketed tilt kettle with gallons of product per hour – depending on materials and application. Vessel dimensions: 36" diameter x 37" deep with 18" straight wall, 76" feeding height and 29" discharge height with Tri-Clamp 4½" ID/5" OD discharge port. Equipped with bridge mounted scrape surface pneumatic tilt out agitation and flip top cover. Mounted on (3) leg base frame.

National Board
14468

Side Ports:
(1) 1" NPT
(2) 1½" NPT

Bottom Ports:
(1) 3/8" NPT – Drain Port Outlet

MAWP: 100 PSI @ 338°F

MDMT: -20°F @ 100 PSI

OAD: 100" L x 97" W x 114" H
(With agitation Lifted 121" H)

Lee Kettle Double Motion 100D9MT CART

• Manufacturer: Lee
• Model Number: 100D9MT CART
• Frain Number: R37751

Lee, Model 100D9MT, 316 stainless steel skid mounted jacketed kettle with hot water circulation. Vessel Dimensions: 36" diameter x 28" deep with a 13" straight wall. Equipped with a Mokon DR4018AFW01 water heater, flush mount sensor, tilt out bridge mounted scrape agitator powered by a single 3 Hp drive and 3½" OD / 3"ID tri-clamp style discharge with ball valve with 28" ground clearance. Mounted on stainless steel frame with casters.

Water Supply To Heater: 1" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 15129

OAD: 92"L x 50"W x 80"H

Lee Kettle Double Motion 100D9MT CART

• Manufacturer: Lee
• Model Number: 100D9MT CART
• Frain Number: R37750

Lee, Model 100D9MT, 316 stainless steel skid mounted jacketed kettle with hot water circulation. Vessel Dimensions: 36" diameter x 28" deep with a 13" straight wall. Equipped with a Mokon DR4018AFW01 water heater, flush mount sensor, tilt out bridge mounted scrape agitator powered by a single 3 Hp drive and 3½" OD / 3"ID tri-clamp style discharge with ball valve with 28" ground clearance. Mounted on stainless steel frame with casters.

Water Supply To Heater: 1" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 15128

OAD: 92"L x 50"W x 80"H

Lee Kettle W/O Agitation 150D

• Manufacturer: Lee
• Model Number: 150D
• Frain Number: 5J0818

Lee, 150 gallon capacity, 316 stainless steel jacketed kettle. Vessel dimensions: 42" diameter x 34" deep with a 15" straight wall. Equipped with lift up covers and 2½" OD / 2" ID tri-clamp style bottom discharge with 15" ground clearance.

Jacket Ports:
(2) 1½" NPT

MAWP: 90 PSI @ 350°F

OAD: 47"L x 44"W x 56"H

Lee Kettle Double Motion 15LD9MT

• Manufacturer: Lee
• Model Number: 15LD9MT
• Frain Number: R34992

Lee Model 15LD9MT, 5 gallon, 316 stainless steel, double motion 1/2 jacketed kettle with amount of product per hour – depending on materials and application. Vessel dimensions: 14" diameter x 12" Deep with a 6" straight wall. Equipped with tilt out double motion, counter rotating scrape surface agitation, with bolt down cover and (2) 2-1/2" OD and (1) 2" OD sanitary top ports, Full jacket rated at: MAWP of 60 psi @ 308°F and MDMT of -20°F @ 60 psi with (1) 1-1/2" OD threaded side bottom jacket port. Dish bottom with 3" OD center bottom sanitary discharge with 16" floor clearance and secondary butterfly valvewith temperature senser. Control panel has reset, e-stop buttons with vari speed controller. Mounted on stainless steel frame with push handle and locking casters.

OAD: 60" L x 36" W x 62" H

Lee Kettle Single Motion 20 CHD7T

• Manufacturer: Lee
• Model Number: 20 CHD7T
• Frain Number: R37440

Lee, 20 gallon, 316 stainless steel jacketed kettle. Vessel Dimensions: 22" diameter x 16" deep with a 6" straight wall. Equipped with a tilt out bridge mounted, scrape agitator powered by a 1 Hp drive with variable speed control and tilting discharge with 20" ground clearance. Mounted on stainless steel frame with manual kettle tilting discharge.

Jacket Fittings:
(2) 1" NPT

MAWP: 40 PSI @ 287° F
MDMT: -20°F @ 40 PSI

OAD: 66"L x 44"W x 60"H

Lee Kettle Double Motion 300D9MS

• Manufacturer: Lee
• Model Number: 300D9MS
• Frain Number: R35511

Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.

Jacket Ports:
(2) 1½" NPT

Nat’l Brd: 14823
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 74"L x 59"W x 79"H

Lee Kettle Double Motion 300D9MS

• Manufacturer: Lee
• Model Number: 300D9MS
• Frain Number: R35510

Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.

Jacket Ports:
(2) 1½" NPT

Nat’l Brd: 14822
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 74"L x 59"W x 79"H

Lee Kettle Double Motion 300D9MS

• Manufacturer: Lee
• Model Number: 300D9MS
• Frain Number: 5J0282

Lee, Model 300D9MS, 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted sweep agitator and 4½" OD / 4" ID Tri-Clamp style bottom discharge with 17" ground clearance.

Jacket Ports:
(2) 1½" NPT

Nat’l Brd: 9116
MAWP: 125 PSI @ 353°F
MDMT: -20°F @ 100 PSI

OAD: 71"L x 58"W x 77"H

Lee Kettle Double Motion 150D9MS

• Manufacturer: Lee
• Model Number: 150D9MS
• Frain Number: R35512

Lee, Model 150D9MS 150 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 42" diameter x 39" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.

Jacket Ports:
(2) 1½" NPT

Nat’l Brd: 14717
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 64"L x 48"W x 77"H

Lee Tank Processors 1500U9MS

• Manufacturer: Lee
• Model Number: 1500U9MS
• Frain Number: R36094

Lee, 1500 gallon capacity, 316 stainless steel insulated process tank. Vessel dimensions: 78" diameter with 86" straight wall. Equipped with dome top, 24" OD flip top man way and top mounted 15 Hp / 10 hp double motion scrape surface agitation. Dish bottom has 4½" OD / 4" ID center bottom ball valve discharge with 27" ground clearance.

Top Ports:
(2) 4½"OD / 4"ID Tri-Clamp
(5) 3½"OD / 3"ID Tri-Clamp
(3) 2½"OD / 2"ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp

OAD: 90" L x 84" W x 185" H