Morcos Machines

Morcos Candy Chocolate Enrober COVER620PR

• Manufacturer: Morcos
• Model Number: COVER620PR
• Frain Number: R37151

Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped with stainless steel wire mesh product conveyor belt thru the enrober, star pump, stainless steel product tank, chocolate reservoir and pressure pipe circulation. Feed system also feeds bottom section with separate pipe which enables total control of the bottom wave. Blower adjustment for volume or speed of air and angle of flow, along with vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. The control panel has a touch pad controller with readout, chocolate pump, room heat with water temperature controllers, belt and stirrer on / off, forward / reverse switches, start, stop and e-stop push buttons. Mounted on stainless steel frame with height adjustable legs.

Morcos Candy Chocolate Tempering AWK1000/SK200

• Manufacturer: Morcos
• Model Number: AWK1000/SK200
• Frain Number: R37150

Morcos stainless steel skid mounted melt tank and tempering system with self contained heating system.

Model AWK 1000, 2200 lb., stainless steel , jacketed, self-contained chocolate melt tank, with pounds of product per hour – depending on materials and application. Full jacket, with self-contained heater with side and top temperature sensor. Slant bottom discharge to transfer pump.

Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the jacketed pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.

OAD: 128"L x 64"W x 102"H

Morcos Candy Chocolate Enrober COVER620PR

• Manufacturer: Morcos
• Model Number: COVER620PR
• Frain Number: R36213

Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped with stainless steel wire mesh product conveyor belt thru the enrober, with star pump, stainless steel product tank, chocolate reservoir, pressure pipe circulation and feed system that also feeds bottom section with separate pipe which enables total control of the bottom wave and blowers adjustments for volume or speed of air and angle of flow. vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. Control panel has touch pad controller with readout and room heat and water temperature controllers, belt and stirrer on / off, chocolate pump, forward and reverse switches, with start, stop and e-stop push buttons. Mounted on heavy duty base frame with height adjustable legs.

Morcos Candy Chocolate Tempering AWK1000/SK200

• Manufacturer: Morcos
• Model Number: AWK1000/SK200
• Frain Number: R36210

Morcos stainless steel skid mounted melt tank and tempering system with self contained heating system.

Model AWK 1000, 2200 lb, stainless steel , jacketed, self contained chocolate melt tank, with pounds of product per hour – depending on materails and application. Full jacket, with self contained heater with side and top tempature probes and side tempature gauge. Dish bottom has flanged center bottom discharge. Mounted on (4) stainless steel legs.

Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the JK pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.

Morcos Candy Chocolate Tempering AWK1000/SK200

• Manufacturer: Morcos
• Model Number: AWK1000/SK200
• Frain Number: R36211

Morcos stainless steel skid mounted melt tank and tempering system with self contained heating system.

Model AWK 1000, 2200 lb, stainless steel , jacketed, self contained chocolate melt tank, with pounds of product per hour – depending on materails and application. Full jacket, with self contained heater with side and top tempature probes and side tempature gauge. Dish bottom has flanged center bottom discharge. Mounted on (4) stainless steel legs.

Morcos Model SK 200, stainless steel, cylindrical construction with double jacketed, multi-sectional (tempering plates) with capacities up to 200 kg per hour – depending on materials and application. Equipped with (2) heating sections, (3) cooling sections and (2) re-heating sections. Main drive SEW geared motor drive with frequency inverter and (2) independent water heat exchangers with circulators and (1) independent heating system. Chocolate arrives to the machine from underneath forced by a built in chocolate pump fed from the buffer tank through the JK pipes, chocolate is then cooled down gradually through the different sections and finally slightly re-heated through the last 2 sections and then leaves the tempering machine totally tempered and the transfer of the chocolate from underneath towards the top is assisted by the motion of hollow spirals scraping the chocolate from sides, bottom and top ensuring a continuous mixing during all the procedure. Has a touch screen with tempering program to control the system.

Morcos Candy Chocolate Enrober COVER620PR

• Manufacturer: Morcos
• Model Number: COVER620PR
• Frain Number: R36212

Morcos Model 620 PR, 24" wide, stainless steel chocolate enrober with pounds and number of product per hour – depending on materials and application. Equipped with stainless steel wire mesh product conveyor belt thru the enrober, with star pump, stainless steel product tank, chocolate reservoir, pressure pipe circulation and feed system that also feeds bottom section with separate pipe which enables total control of the bottom wave and blowers adjustments for volume or speed of air and angle of flow. vibration system, scavenging roller with scraper to adjust bottom thickness and remove excess chocolate. Control panel has touch pad controller with readout and room heat and water temperature controllers, belt and stirrer on / off, chocolate pump, forward and reverse switches, with start, stop and e-stop push buttons. Mounted on heavy duty base frame with height adjustable legs.

Morcos Candy Chocolate Melter AWK500

• Manufacturer: Morcos
• Model Number: AWK500
• Frain Number: R35154

Morcos, Model AWK 500, 1100 lb, stainless steel , jacketed, self contained chocolate melt tank, with pounds of product per hour – depending on materails and application. Vessel dimensions: 26" diameter x 48" deep. Equipped with sweep agitation powered by a 2 hp drive, 4.5 kw self containted heater and gear pump dischage powered by a 1 hp drive and 2" OD discharge with 15" ground clearance. Control panel with push button start / stop for agitation, on / off switches for heater and pump and digital temperature controls.

OAD: 60"L x 40"W x 90"H

Morcos Cooler Tunnel STKK24

• Manufacturer: Morcos
• Model Number: STKK24
• Frain Number: R32000

Morcos Machinery Model STKK24, 24 inch wide x 24 feet long convection cooling tunnel with number of product per hour – depending on materials and application. Equipped with stainless steel frame and cladding contact parts, 3 foot In feed table with adjustable approach edge, 24" wide x 24′ long neopreme product belt, has its own motor drive, centering device with automatic belt tracking and tensioning, drive station with speed inverter and spring loaded scrapers for roller self cleaning. 8 section tunnel with hinged gas spring assit flip up covers, with temperature gauges and height up to 3½". Built in air cooling units one unit for each zone (1) complete 3.5 Kw cooling system with humidity control and cooling air is delivered in loops by forced cold air streams through twin blowers with (2) independent adjustable cooling zones, cooling compressor, air cooled condenser, with frequency inverter and evaporator. Control panel has blower and belt on / off and speed controls with e-stops. Mounted on heavy duty frame.

OAD: 389" L x 42" W x 44" H

Morcos Mixer Powder Ribbon S. S. RM1200

• Manufacturer: Morcos
• Model Number: RM1200
• Frain Number: R34020

Morcos, Model RM1200, 40 ft³, (35 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of 76" in Length; 30" in Width; 33" in Depth. Equipped with flip up cover, lift out safety screen, 2¾" OD motor shaft, 6" OD mixing shaft with 2½" wide x ¼" thick (outer) and 2½" wide x ¼" thick (inner) stainless steel ribbons. 11" OD center bottom discharge with 23" floor clearence and 14.75 Hp motor. Mounted on stainless steel (4) leg frame.

OAD: 106"L x 40"W x 78"H

Morcos Mixer Powder Ribbon S. S. RM2000

• Manufacturer: Morcos
• Model Number: RM2000
• Frain Number: R33992

Morcos, Model RM200, 65 ft³, (60 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of 90" in Length; 36" in Width; 40" in Depth. Equipped with flip up cover, lift out safety screens, 3½" OD motor shaft, 7" OD mixing shaft with 2¾" wide x (5/16)" thick (outer) and 2¾" wide x (5/16)" thick (inner) stainless steel ribbons. 11" OD center bottom discharge with 23" floor clearence and 20 Hp motor. Mounted on stainless steel (4) leg frame.

OAD: 124"L x 46"W x 89"H

Morcos Mixer Powder Ribbon S. S. RM2000

• Manufacturer: Morcos
• Model Number: RM2000
• Frain Number: R33993

Morcos, Model RM200, 65 ft³, (60 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of 90" in Length; 36" in Width; 40" in Depth. Equipped with flip up cover, lift out safety screens, 3½" OD motor shaft, 7" OD mixing shaft with 2¾" wide x (5/16)" thick (outer) and 2¾" wide x (5/16)" thick (inner) stainless steel ribbons. 11" OD center bottom discharge with 23" floor clearence and 20 Hp motor. Mounted on stainless steel (4) leg frame.

OAD: 124"L x 46"W x 89"H

Morcos Mixer Powder Ribbon S. S. RM600

• Manufacturer: Morcos
• Model Number: RM600
• Frain Number: R32171

Morcos Machinery Model RM600, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 600 Litres, (21.18 ft³) with minimum mixing capacity of 268 litres (9.464 ft³) and maximum mixing capacity of 500 litres (17.657 ft³). Mixing chamber dimensions: 60" in Length; 24" in Width; 30" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 6" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 1¾" wide x (1/8)" thick (outer) and 1¾" wide x (1/8)" thick (inner) stainless steel ribbons powered by 7.3 Hp motor drive. 8" OD center bottom pneumatic discharge gate with 24" ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
Granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).

OAD: 92" L x 30" W x 64" H