See us at the PMCA Show in Lancaster, PA on 4/15
Home » Oakes
Oakes manufactures high quality mixers, foamers, depositors, and blenders for the food, pharmaceutical, and chemical processing Industries. Oakes Mixers aerate slurry or homogenize to produce a uniform and stable cell structure. Mixers can combine multiple liquid streams, or just improve texture where aeration is not necessary. The high shear rotor/stator mixing heads unique design is the key to consistent final densities. Oakes mixers homogenize or aerate slurry with minimal heat rise.
Frain Industries carries a number of used Oakes mixers, depositors, blenders, and other Oakes machines.
Oakes stainless steel, continuous rotor stator pin mill mixer rated up to 4000 lb per hour – depending on materials, application and machines configuration. Equipped with 14" outside diameter mixing head and 2" outside diameter threaded center product port, 10 hp rotary motor and a 3/4 hp pump with a variable speed control. Unit is jacketed with MAWP: 60 PSI @ 100 Fahrenheit down to -20 deg. F @ 200 PSI. Mounted on (4) leg base.
Optional: Oakes 4MB3A Lab/ R&D mill available for short term testing before running your large batch on mill listed above. Item R202542.
OAD: 68" L x 42" W x 72" H
Oakes Model 60SMV751, Stainless steel, continous motion, slurry mixer and transfer system rated up to 440 gallons or 2,000 lbs of product per load with 15 minutes or less mix times – depending on materials, application and machine configuration. Equipped with 60" ID x 36" straight wall stainless steel product mix tank with pnuematic flip up cover and magnetic safety switch with (2) stationary pull out stator assemblies one each side and inner rotating mixing blades with bottom platform mounted motor drive. Waukesha Model 200U1PD transfer pump has 4½" OD / 4" ID inlet / outlets ports with twin wing rotors, O-Ring seals, 10 Hp motor drive to ensure quick and total transfer of product and now mixer is ready to receive another batch. Control panel has A/B controller and panel view with digital readout, rotor, pump and e-stop push button controls. A/C starter package and A/B poweflex VFD. Mounted on 102" long x 79" wide stainless steel platform with legs.Ideal for icing, frosting, slurries and more.
OAD: 104" L x 79" W x 108" H
Oakes Model 2MBTIA, jacketed, high shear, continuous, lab size R & D, rotor and stator pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. 316 stainless steel mixing head. Equipped with 9" diameter x 12" deep stainless steel supply hopper, APV R series positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor. Mounted on an aluminum base designed for cart or bench top use.
OAD: 30"L x 25"W x 32"H
Oakes Model 2MBTIA, jacketed, high shear continuous, lab size R & D pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. Equipped with 9½" OD x 20" deep (5 gallon) supply hopper, SPX Model R0 positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor.
OAD: 42"L x 25"W x 32"H
Oakes Model 4MB3A, lab model, continuous mixer, aerator rated from 25 lbs to 500 lbs per hour – depending on materials and application. Equipped with mixing head of two stators and a rotor, and is assembled with the stators surrounding the rotor. The rows of blades on the rotor are located between those on the stators, with no contact between moving and stationary elements. The mixing takes place between the teeth of the rotor and each of the two stators. Ingredients enter the head through the center of the rear stator, flow in a swirling path between the blades of the rotor and rear stator to the outer circumference of the stator cavity, then between the teeth of the front stator and rotor and out the center of the front stator. Product is discharged under pressure, it may be piped directly to the point of use thus eliminating any manual handling of the finished material. Air or other gas may be incorporated in the mixture and evenly distributed throughout the whole mass. The stator members are jacketed through which coolants may be circulated, thereby removing heat energy added as a result of the mixing action. OAD: 3’L x 3’W x 5’H
Oakes, Model 8MV50, jackted high shear continuous rotor stator pin mill mixer with 316 stainless steel contact parts. Rated from 150 to 1000 lb per hour – depending on materials, application, environment and machine configuration. Equipped with Waukesha, Model 25, positive displacement feed pump with a 2"OD / 1½"ID seated bevel style inlet and a 8" diameter mixing head with 2"OD/1½"ID seated bevel style center product discharge with 30" ground clearance powered by a 50 hp drive. Mounted on painted base frame.
OAD: 97"L x 53"W x 60"H
Oakes, Model 14MC10, jackted high shear continuous rotor stator pin mill mixer with 316 stainless steel contact parts rated up to 4000 lb per hour – depending on materials, application and machines configuration. Equipped with Crepaco, Model R3R, positive displacement feed pump with a 2"OD / 1½"ID seated bevel style inlet powered by a 1½ hp drive and a 14" OD mixing head with 2" OD / 1½" ID seated bevel style center product discharge with 48" ground clearance powered by a 10 hp drive. Control panel with push button start / stop for rotor and pump and variable speed controls. Mounted on painted base frame with casters.
OAD: 60"L x 45"W x 75"H
Oakes, Model 14MF-15IA, jacketed, high shear continuous rotor / stator pin mill mixer, aerator with 316 stainless steel contact parts, rated up to 4000 lb per hour – depending on materials, application and machines configuration. Equipped with Waukesha Model 60, positive displacement feed pump with 3½"OD / 3"ID Tri-Clamp style inlet port powered by 3 Hp drive and 14" diameter mixing head with 2½"OD / 2"ID Tri-Clamp style center product discharge with 46" ground clearance and powered by a 10 Hp motor drive. Control panel has pull to start / push to stop buttons as well as variable speed dials for pump and rotor. system. Mounted on a stainless steel base frame.
OAD: 64"L x 39"W x 77"H
Oakes Model 14MC10, high shear, continuous, rotor and stator, pin mill rrated up to 4000 lb per hour – depending on materials and application. Equipped with 16" OD 14" ID mixing head, 2" OD center product port, radial flow disc, with high shear action consisting of front / rear stator and rotor with drive shaft, rated to ___ rpm. has __ Hp main motor, drive, with Waukeshaw PD pump with 2" OD / 1-1/2" ID pump inlet / outlets Control Panel with start, stop and e-stop controls. Mounted on (4) leg stainless steel base frame.
OAD: 56" L x 28" W x 82" H
Oakes Model 14MF, stainless steel, high shear, continuous rotor / stator, pin mill mixer rated up to 4,000 lbs per hour – dpending on materials, application and machine configeration. Equipped with 14" diameter jacketed mixing head with 2-1/2" OD product inlet, radial flow disc with high shear action consisting of front / rear stator and 15 Hp motor. Waukesha Model 30 feed pump geared to 245 gallons per hour. Control panel with start / stop controls, counters and dual variable speed drives (mix head and pump). Mounted on heavy duty base frame.
OAD: 70" L x 36" W x 62" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.