PDC Intl. Corp. Machines


PDC Intl. Corp. Machines In Stock

PDC Intl. Corp. Labeler Sleever R600

PDC Model R600, high speed, shrink sleever or bander with heat tunnel rated from 50 to 600 containers per minute – depending on materials and application. Layflat sleeve size range: 30mm (1.2") to 100mm (3.93") wide; 1" to 6" in Height with a minimum container height of 3" and capable of running sleeve film of PVC, PET, and OPS from 1.5 ml to 2 ml. Equipped with vertical perforation wheel, film registration, static eliminator, remote film stand with powered film unwind and 21" diameter film reel, material out sensor, film tensioner low film indicator light. Control panel with A/B controller with touch pad operator interface interlocking safety guarding with stainless steel frame and to be mounted over existing conveyor.
Tunnel: PDC Model stainless steel, dual zone over conveyor neck band, or sleeve label hot air shrink tunnel with speeds – dependent on materials and application. Equipped with 72" long x 5" wide x 4-1/2" high shrink channel, capable of handling 4" diameter necks and up to 6" high bans or sleeves, (2) Athena temperature controllers, (4) top mounted 1 Hp blower motors and is mounted on stainless steel base stand.

OAD: 72" L x 60" W x 86" H Sleever
72" L x 16" W x 62" H Tunnel
60" L x 28" W x 89" H Stand

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 75M

PART OF COMPLETE LINE

PDC Model 75M, automatic, continuous motion, neck bander / sleever rated from 50 to 300 container per minute – depending on materials, application and machine configuration. Size range of: 3/8" to 3" in diameter; 3/4" to 2" in height. Equipped with 18" diameter eel, with perf knife cut-off, start / stop, jog and feeder controls with e-stop, has a 18" L x 3" W hot air heat tunnel, and is mounted on S/S base frame.

OAD: 70" L x 48" W x 79" H

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Shrink Tunnels KST 55-712

PDC Model KST 55-712, stainless steel, dual zone, steam tunnel. Equipped with 7" Wide; 12" High aperature; 55" Long dual zone steam chamber with 5 rows of tubes on each side, 10 rows total with adjustable steam distributors and mounted on mild steel base frame with a Sussman Model ES48 electric steam generator, 48 kw rated up to 145 lbs of steam per to 100 psi, with a 1/2" water inlet, 1" steam outlet.

OAD: 55" L x 24" W x 59" H Steam Tunnel
33" L x 24" W x 48" H Generator

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 6743

PDC Model 90-2E, automatic, high speed, dual head / dual reel neck bander / sleeve applicator combined thru rates from 50 to 400 containers per minute – depending on materials, application and machine configeration. Size range: 3/8" to 3" in diameter; 5/8" to 5" in height (with proper chage parts). 120mm maximum lay flat band width, minimum flat band width per application. Equipped with dual heads for continuous operation (one running while other loading) dual timing screws, dual powered film unwind, low film sensors, band pre-shrink, no container / no band sensor, static eliminator, Siko gauges, stepper band feed drives. Control panel with Allen Bradley PLC and Panel view operator interface. Additional features include dual speed capability (senses product infeed volume and adjusts machine speed accordingly) and Lexan guarding. Mounted on (4) leveling leg base frame.
last running 350 cpm flat band width of 120mm
set to run 67mm lay flat width x 35mm high neck bands onto 4-1/2" high container.

OAD: 74" L x 70" W x 78" H

Get a Free Quote Call: 630-629-9900

PDC Intl. Corp. Capper Neck Bander 55M

PDC Model 55M, stainless steel, neck bander / sleever rated from 50 to 120 container per minute – depending on materials and application. Band / sleeve size range: 3/8" to 3" in diameter, 5/8 to 2" in height with 4.8" maximum lay flat and minimum depending on application. Equipped with mechanical feed, vertical perf wheel, static eliminator and low material sensor with status light beacon. Designed for tamper evident banding and shrink sleeve labeling applications. Mounted on "H" style base frame leveling legs.

OAD = 32"L x 40"W x 92"H

Get a Free Quote Call: 630-629-9900