Votator Machines

Votator Machines In Stock

Votator Mixer Paste Horizontal CR6

  • Manufacturer: Votator
  • Model Number: CR6
  • Frain Number: 5G9699

Votator, Model CR-6, stainless steel jacketed paste mixer rated up to 65 cubic inches volume with gallons per minute – depending on materials, application and machine configuration. Continuous mixing, blending, dispersing and whipping. Equipped with 5½" OD rotor, 1½" OD / 1" ID seated bevel style inlet and 1½" OD / 1" ID seated bevel discharge with 21" ground clearance. Powered by 5 Hp motor drive with variable speed gearbox.

OAD: 40"L x 20"W x 28"H

Get a Free Quote Call: 630-629-9900

Votator Heat Exch 42043 B

  • Manufacturer: Votator
  • Model Number: 42043 B
  • Frain Number: 5B0924

Horizontal, stainless steel, continuous pin style mixer / resting tube. Equipped with a 26-1/2" long x 4" diameter chamber, 3/4" inlet and 1" threaded discharge. Crystallizer is an essential piece of equipment in the production of high quality margarine. The crystallizer induces mass crystallization of the sub cooled oil and distributes it to produce an homogenous plastic mixture of crystalline and liquid oils. Mounted on stainless steel frame.

OAD: 45"L x 31"W x 47"H

Get a Free Quote Call: 630-629-9900

Votator Heat Exch Scrape Surface 936635

  • Manufacturer: Votator
  • Model Number: 936635
  • Frain Number: 5G9931

Votator, A and B unit Shortening system components.
Upper unit:
Ammonia jacketed, 6 x 72 Votator 2 with a Chrome Nickel tube, 4.5" shaft with rotary joint, Celcon blades, una/Neoprene Elastomers, Carbon vs Chrome Oxide Seals, and a 20Hp 350RPM gear motor. Equipped with stainless steel frame, (1) 12" diameter x 70" long product chamber powered by a 20 Hp drive with (1) 2½" NPT and (1) 1½" NPT media ports and (1) 2½"OD / 2"ID I-line and (1) 2"OD / 1½"ID I-line jacket ports.

Product Chamber: MAWP: 600 psi @ 400°F
MDMT: -20°F @ 600 psi
Media Chamber: MAWP: 250 psi @ 400°F
MDMT: -20°F @ 250 psi

Lower unit:
Pin Mill 13" x 45.75" jacketed with 7.5hp, 127 rpm gearmotor. (1) 14" diameter x 45" long stainless steel frame powered by a 7½ Hp drive with (2) 2½"OD / 2"ID I-line product ports. gearmotor

Product Chamber: MAWP: 600 psi @ 100°F
MDMT: -20°F @ 600 psi

OAD: 120"L x 28"W x 63"H

Get a Free Quote Call: 630-629-9900

Votator Heat Exch Scrape Surface IC672L

  • Manufacturer: Votator
  • Model Number: IC672L
  • Frain Number: 5G9915

Votator Model IC672L, stainless steel, single tube, 6 x 72, scrape surface heat exchanger with pounds of product per hour – depending on materials and application. Equipped with 6" diameter x 72" long stainless steel chamber has (9 ft²) of heat transfer area with (24) 6-1/16" long x 1-15/16" wide stainless steel, staggered scraper blades powered by 15 Hp motor drive and gear reducer with (2) 2-1/2" OD / 2"ID sanitary and (2) 2" OD / 1-1/2" ID threaded product and medium inlet and outlet ports. Mounted on (6) leg base frame. National Board # 4583

Product Chamber: MAWP: 150 psi @ 375°F
Media Chamber: MAWP: 400 psi @ 375°F

OAD: 136" L x 30" W x 61" H

Get a Free Quote Call: 630-629-9900

Votator Heat Exch Scrape Surface 1W

  • Manufacturer: Votator
  • Model Number: 1W
  • Frain Number: 5D7423

Laboratory 3 x 12 size scraped surface heat exchanger, S/S contact surface, water cooled, Equipped with 2 HP gear reduction drive motor, 12"L x 3"dia chamber & 1/2" inlet and outlet. Unit mounted on a portable cast iron frame.

OAD: 50"L x 18"W x 24"H

Get a Free Quote Call: 630-629-9900