Wexxar Machines
Wexxar Machines In Stock
Wexxar Sealer Case Taper 505/252TB
- Manufacturer: Wexxar
- Model Number: 505/252TB
- Frain Number: R33261
Wexxar / Belcor, Model 505 / 252 uniform, semi automatic case erector / pack station with top and bottom case taper. Rated from 5 to 25 case per minute – depending on materials, application and operator dexterity. Case size range: 8" to 26½" in Length; 6" to 16" in Width; 5" to 16" in Height. Equipped with Belcor Model 505 manual case erector top case packer to Model 252 top / bottom case taper with side snap flap folders, 58" long by 3" wide side case transfer belts, top / bottom 2" tape heads, hand crank height and width adjustable, Control panel with start, stop, e-stop push button controls. Mounted on (4) leg height adjustable base frames with locking casters.
OAD: 103"L x 35"W x 65"H
Get a Free Quote Call: 630-629-9900
Wexxar Sealer Case Taper 505/252TB
- Manufacturer: Wexxar
- Model Number: 505/252TB
- Frain Number: R33260
Wexxar / Belcor, Model 505 / 252 uniform, semi automatic case erector / pack station with top and bottom case taper. Rated from 5 to 25 case per minute – depending on materials, application and operator dexterity. Case size range: 8" to 26½" in Length; 6" to 16" in Width; 5" to 16" in Height. Equipped with Belcor Model 505 manual case erector top case packer to Model 252 top / bottom case taper with side snap flap folders, 58" long by 3" wide side case transfer belts, top / bottom 2" tape heads, hand crank height and width adjustable, Control panel with start, stop, e-stop push button controls. Mounted on (4) leg height adjustable base frames with locking casters.
OAD: 103"L x 35"W x 65"H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape WFT
- Manufacturer: Wexxar
- Model Number: WFT
- Frain Number: 5H6309
Wexxar, Model WFT, automatic, in line case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials, application and machine configuration. Case size range: 6" to 24" in Length; 6" to 17" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, pusher bar and is hand crank adjustable. with bottom 2" tape head and 32" long side belt discharge. Control panel has jog, start, stop and e-stop push button controls with statis light bar. Mounted on (4) leg frame with safety door guarding.
OAD: 144" L x 60" W x 76" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape WFT
- Manufacturer: Wexxar
- Model Number: WFT
- Frain Number: 5H6021
Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials, application and machine configuration. Case size range:6" to 24" in Length; 6" to 17" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 70" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" tape head with perpendicular tape roll and 32" long side belt discharge. A/B PLC with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on frame with (4) leveling legs.
OAD: 172" L x 54" W x 62" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Glue WFH
- Manufacturer: Wexxar
- Model Number: WFH
- Frain Number: 5H5505
Wexxar Model WFH, automatic, inline case erector, bottom hot melt glue sealer with number of cases per minute – depending on materials and application. Case size range: 6" to 24" in Length; 5" to 16-1/2" in Width; 3.5" to 16.5" in Height. Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, case pusher bar, Nordson hot melt glue system, single arm case compression ram and 36" long dual side roller discharge section. Control panel with A/B CPU, has ram arm, glue, jog, run, remote demand, on / off switches with start, stop, e-stop buttons, statis light bar and safety guarding. Speed dependant on materials, application and machine configuration.
OAD: 168" L x 70" W x 99" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape ABFT
- Manufacturer: Wexxar
- Model Number: ABFT
- Frain Number: 5H5506
Wexxar Model ABFT, automatic, in line, case erector, bottom taper, Case size range: 8" to 22" in Length; 6" to 16" in Width; 4" to 19" in Height. Equipped with 48" long powered case magazine, pin and dome case erecting system, case pusher bar, dual side belt conveyors, minor & major bottom flap closers, 2" wide pressure sensitive bottom tape head and safety guarding. A/B controller with run, jog, on / off switches and start, stop, e-stop and status light bar. Mounted on locking casters. Speed dependant on materials, application and machine configuration.
OAD: 156" L x 45" W x 82" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Glue WFH
- Manufacturer: Wexxar
- Model Number: WFH
- Frain Number: 5H4040
Wexxar Model WFH, automatic, inline case erector, bottom hot melt glue sealer. Case size range: 6" to 24" in Length; 5" to 16½" in Width; 3.5" to 16½" in Height. Equipped with 72" long powered blank case magazine, reciprocating pin and dome case forming plates, minor and major flap closers, hot melt glue system, compression ram and 36" long dual side roller discharge section. A/B CPU, has ram arm, glue, jog and run control switches with start, stop and e-stop buttons, status light bar and safety guarding. Mounted on (4) leg base frame. Speed dependant on materials, application and machine configuration.
OAD: 147" L x 54" W x 99" H
Get a Free Quote Call: 630-629-9900
Wexxar Sealer Case Taper WST07
- Manufacturer: Wexxar
- Model Number: WST07
- Frain Number: 5G1991
Wexxar Model WST07, automatic, uniform, top case taper rated from 1 to 65 cases per minute – depending on materials and application. Case size range: 10" to 22" in Length; 6" to 18" in Width; 5" to 20" in Height. Equipped with two 72" long x 3" high side case gripper belt conveyors, top minor flap closer and major flap folding plows, with 2" tape head. Control panel with start, stop, e-stop buttons safety guarding and mounted on base frame height adjustable legs.
OAD: 104" L x 36" W x 89" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape WFT
- Manufacturer: Wexxar
- Model Number: WFT
- Frain Number: 5H4560
Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials and application. Case size range:6" to 24" in Length; 6" to 17" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 5" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" tape head with 32" long dual side belt discharge section. hand crank height and width adjustable. Control panel has push button controls for jog, start, stop and e-stop and statis light bar. Mounted on (46) leg base frame with safety door guarding.
OAD: 180"L x 54"W x 95"H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape WFT
- Manufacturer: Wexxar
- Model Number: WFT
- Frain Number: 5G5414
Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials and application. Case size range: 6" to 24" in Length; 5" to 17" in Width; 3½" to 16½" in Height. Equipped with 70" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head with perpendicular tape roll and 32" long dual side belt discharge section. Control panel has A/B plc with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.
OAD: 172" L x 54" W x 62" H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape WF2T
- Manufacturer: Wexxar
- Model Number: WF2T
- Frain Number: 5G9929
Wexxar, Model WF-2T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 25 cases per minute – depending materials and application. Case size range: 7" to 24" in Length; 5" to 17" in Width; 5" to 12" in Height. Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.
OAD: 130"L x 68"W x 84"H
Get a Free Quote Call: 630-629-9900
Wexxar Case Erector Tape ABFT
- Manufacturer: Wexxar
- Model Number: ABFT
- Frain Number: 5H2976
Wexxar, Model ABF-T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials, application and machine configuration. Case size range: 8" to 22" in Length; 6" to 16" in Width; 4" to 19" in Height. Equipped with 48" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Mounted on (4) leg base frame with leveling legs.
OAD: 146"L x 53"W x 90"H
Get a Free Quote Call: 630-629-9900