See us at the PMCA Show in Lancaster, PA on 4/15
Home » Wexxar » Page 3
Wexxar, Model WF TE, automatic, case erector, bottom taper. Rated from 5 to 15 cases per minute – depending on materials and application Case size range: 10" to 22" in Length; 6" to 16" in Width; 6" to 16" in Depth and capable of handling different case styles in a wide range of sizes with proper change parts. Equipped with 50" long powered dual screw blank case magazine, pin and dome case erecting system, case pusher bar, major and minor flap closers with 20" long x 8" wide side belts and 1½" bottom tape head. Control panel has A/B controller, machine and remote demand and push button start / stop, e-stop and statis light bar. Mounted on (4) leveling leg frame with slide door safety guarding.
OAD: 118" L x 56" W x 82" H
Wexxar, Model 290H, Automatic, uniform, top hot melt case sealer. Rated from 5 to 50 case per minute -depending on materials and application. Case size range: 8" to 24" in Lenght x 5¼" to 17½" in Width x 5" to 19" in Height. Equipped with (2) 80" long x 3" high side case transfer belts, Nordson hot melt glue system and control panel with touch screen HM and statis light bar. Mounted on (4) leg height adjustable frame and safety guarding.
OAD: 112"L x 50"W x 82"H
Wexxar, Model 290H, Automatic, uniform, top hot melt case sealer. Rated from 5 to 50 case per minute -depending on materials and application. Case size range: 8" to 24" in Lenght x 5¼" to 17½" in Width x 5" to 19" in Height. Equipped with (2) 80" Long x 3" high side case transfer belts, Nordson hot melt system, 9½" wide x 32" long discharge conveyor. Control panel with touch screen HM and statis light bar. Mounted on height adjustable frame and safety guarding.
OAD: 166"L x 50"W x 82"H
Wexxar Model IPAK TF-200S, Automatic, 4-corner servo, tray former, hot melt glue sealer with number of trays per minute – depending on materials and application. Tray size range: per application and is capable of forming different type trays with proper change parts. Equipped with blank tray magazine, and has blank size of 32¾" x 32¾", (4) suction cup vacuum reciprocating pick and place and tray feed bar with bottom tray stop, single mandrel ram head with Nordson Model 14 Liberty hot melt glue system. Control panel has A/B PLC controller with etherNer/IP and Siemens Simatic HMI touch screen interface with readout, reset and e-stop push buttons with 132" long x 36" wide tray discharge conveyor. Mounted on heavy duty frame with safety door guarding.
OAD: 225"L x 87"W x 137"H
Wexxar, Model WF-30T, Automatic, in line case erector, bottom tape sealer. Rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 7-14"" to 18" in Length; 7-1/4" to 14" in Width; 6" to 15" in Height and erects both RSC and HSC cases. Equipped with 72" long (2) belt powered blank case magazine, pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" Dekka flip up tape head and 36" long x 3" wide dual side belt discharge section with 24" to 29" discharge height. Control panel has a PLC controller with panel view touch screen controls, digital dial indicator, e-stop and status light bar. Mounted on base frame with leveling legs and safety guarding.
OAD: 132" L x 60" W x 87" H
Wexxar / Belcor, Model 505 / 252 uniform, semi automatic case erector / pack station with top and bottom case taper. Rated from 5 to 25 case per minute – depending on materials, application and operator dexterity. Case size range: 8" to 26½" in Length; 6" to 16" in Width; 5" to 16" in Height. Equipped with Belcor Model 505 manual case erector top case packer to Model 252 top / bottom case taper with side snap flap folders, 58" long by 3" wide side case transfer belts, top / bottom 2" tape heads, hand crank height and width adjustable, Control panel with start, stop, e-stop push button controls. Mounted on (4) leg height adjustable base frames with locking casters.
OAD: 103"L x 35"W x 65"H
Wexxar, Model 290T, Automatic, uniform, top tape case sealer. Rated from 5 to 50 case per minute -depending on materials and application. Case size range: 8" to 32" in Lenght x 5¼" to 17½" in Width x 5" to 19" in Height. Equipped with (2) 80" Long x 3" high side case transfer belts, 2" Deka top tape head with adjustable height and width hand cranks. Control panel with touch screen HMI. Mounted on base frame with adjustable height legs.
OAD: 112"L x 48"W x 82"H
Wexxar, Model WF30T, Automatic, in line case erector, bottom tape sealer. Rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 7-1/4" to 18" in Length; 7-1/4" to 14" in Width; 6" to 15" in Height. Equipped with 72" long (2) belt powered blank case magazine, pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" Dekka flip up tape head and 36" long x 3" wide dual side belt discharge section with 24" to 29" discharge height. Control panel has a PLC controller with panel view touch screen controls, digital dial indicator, start and e-stop push buttons with status light bar. Mounted on heavy duty frame with leveling legs and safety guarding.
Wexxar, Model WF30T, Automatic, in line case erector, bottom tape sealer. Rated from 5 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 7-1/4" to 18" in Length; 7-1/4" to 14" in Width; 6" to 15" in Height. Equipped with 72" long (2) belt powered blank case magazine, pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" Dekka flip up tape head and 36" long x 3" wide dual side belt discharge section with 24" to 29" discharge height. Control panel has a PLC controller with panel view touch screen controls, digital dial indicator, e-stop and status light bar. Mounted on heavy duty frame with leveling legs and safety guarding.
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.