MRM Elgin, Model RPF-8, Automatic, 8-hd left to right, rotary piston filler rated from 30 to 150 containers per minute – depending on materials and application. Fill range: up to 35oz with accuracies of ± 0.5% by volume depending on product and machine configuration. Maximum container size: up to 5" in Diameter; up to 12" in Height. Equipped with 4½" wide x 110" long through conveyor with an infeed/discharge height of 36¾", 30" worm screw to star wheel indexing, 13½" diameter x 22" deep (14 gallon) stainless steel reservoir with level detector, 7" x 6" container pedestals, 7/8" OD nozzles set on 9" centers, no container / no fill, E-stop and safety guarding. Mounted on stainless steel frame.
OAD: 110"L x 54"W x 80"H
Keith, model 5" x 12", piped, variable speed, dispersion mill. Roll dimensions: 5" diameter x 12" long. Rates dependent on materials, application and machine configuration . Equipped with 2 hp drvie, chain safety switch, 12" wide apron with a 5½" discharge, 19" long x 15" wide under roller tray. Mounted in stainless steel cabinet.
Roller Fittings:
(1) 1" NPT
(1) ½" NPT
OAD: 38" L x 34" W x 59" H
Urschel, Model Diversacut 2110, 304 stainless steel, dicer, slicer, strip cutter used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 19¼" x 13½" product charge with a 80" high charge, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 10" in any dimension and 19¾" x 14" discharge chute with 40½" floor clearence. Control panel has start, stop and e-stop push button controls with 10 Hp stainless steel motor drive. Mounted on stainless steel base frame.
OAD: 79"L x 59"W x 82"H
Cornell, Model D16, 304 stainless steel, Versator and vacuum pump. Rated from 1 to 20 gallons of product per minute – depending on materials and application. Equipped with 16" ID product rotating disc, 1" Tri-clamp infeed, 1½" Tri-clamp discharge, 2" Tri-clamp vacuum port. Boltdown door has 4" OD sight port. Versator powered by 7½ Hp, vacuum pump powered by 7½ hp drive. Mounted on portable base with castors.
OAD: 96"L x 53"W x 59"H
Marion, model BP4-2436-UW40, 10 ft³, 304 stainless steel paddle mixer with lbs of product per hour – depending on materials, application and machine configuration. Inner chamber dimensions: 36" in Length x 24" In Width x 29" in Depth. Equipped with 14" long x 14" wide clamp down cover with a 90" infeed height, 3" OD shaft with 14" long x 6" wide paddles powered by a 7½ hp drive, high speed chopper powered by a direct drive 10 hp motor, 4" diameter center bottom discharge with pneumatic slide gate valve and 47" floor clearance, EXPO Type Z MiniPurge Dust Protection for pressurizing control cabinet. Mounted on (4) leg painted frame.
Top ports:
(1) 8" x 8" ID / 12" x 12" OD flange
(1) 6" ID / 8½" OD flange
OAD: 90" L x 57" W x 94" H
Powell Systems, Z style bucket elevator. Number of lbs of product per hour – depending on materials and application. Equipped with white plastic product buckets with inside dimensions of 15" long x 4½" wide x 3" deep and has 36" long horizontal floor run with a 16" long load area and 19" feed height to 142" vertical lift with a 12" wide frame, to 60" overhead horizontal top run with 8" discharge funnel with a 142" discharge height. Control panel with push button start, E-stop and variable speed control.
OAD: 122"L x 31"W x 163"H
Powell Systems, Z style bucket elevator. Number of lbs of product per hour – depending on materials and application. Equipped with white plastic product buckets with inside dimensions of 15" long x 4½" wide x 3" deep and has 36" long horizontal floor run with a 16" long load area and 19" feed height to 142" vertical lift with a 12" wide frame, to 60" overhead horizontal top run with 8" discharge funnel with a 142" discharge height. Control panel with push button start, E-stop and variable speed control.
OAD: 122"L x 31"W x 163"H
Ross, Model PVM 2, 304 stainless steel, verticle mixer. Vessel is designed for vacuum up to 29.5"Hg and jacket is designed for 15 Psig. Working capacity of 1½ gallons and total capacity of 1.9 gallons. Equipped with 9.5" diameter x 6.375" deep removable mixing bowl, powered lid lift, high shear emulsifier and disperser blade both powered by a ¾ hp drive, anchor mixing blade and scraper powered by ½ hp drive, flush mounted sensor. Mounted on painted frame base with castors. Control panel with push buttons.
Top Ports:
(2) 2" I-Line
Jacket Fittings:
(2) ¾" NPT
OAD: 47" L x 30" W x 65" H
Stephan, model UM 12, 12 liter, 304 stainless steel half low pressure jacketed, bowl slicer. Temperature range: up to 203° F. Equipped with 12½" diameter x 7¼" deep mixing bowl, clamp down plastic cover with hand crank side scraper agitation, (2) stainless steel 3" long x 2" wide bottom chopper blades powered by a two speed 2 / 2½ hp 1800 / 3600 rpm base enclosed drive, removable bowl, 1½ gallon cold trap and V-VGD 10 vacuum pump.
MAWP: Atmos @ 203°F
OAD: 21"L x 16"W x 24"H
Sani-Matic, model TW-15, 304 stainless steel trough style COP (clean out of place) system. Equipped with 182" long x 29½" wide x 24¾" deep inner trough with flip up cover, electric immersion heater, (44) side jets, cleaning attachment adapter with (6) 1½" tri clamp fed by a 4" tri clamp, 25 hp recirculation pump, 4" tri clamp infeed/discharge with butterfly valve and 14" discharge height. Control panel with push button start / stop, timer and temperature display.
Vessel Ports:
(1) 3" tri clamp
(2) 2" tri clamp
OAD: 229"L x 60"W x 95"H
DCI, 145 gallon capacity, 316 stainless steel, internal vacuum tank. Vessel dimensions: 42" diameter x 35" deep with a 23" straight wall. Equipped with prop agitation powered by a top mounted 1 hp drive, 16" boltdown manway, (2) CIP balls fed by 1½" Tri-clamp, 2" Tri-clamp discharge with plug valve with 12½" discharge height. Mounted on stainless steel forklift frame with castors.
Top ports:
(1) 3" Tri-clamp
(1) 2" Tri-clamp
(4) 1½" Tri-clamp
MAWP: 50 PSI @ 300°F (Vessel)
MAEWP: 15 PSI @ 300°F (Vessel)
MDMT: -20°F @ 50/-15 PSI (Vessel)
Nat’l Brd: 9951
OAD: 76" L x 52" W x 75" H
Powell Systems, Z style bucket elevator. Number of lbs of product per hour – depending on materials and application. Equipped with white plastic product buckets with inside dimensions of 15" long x 4½" wide x 3" deep and has 36" long horizontal floor run with a 16" long load area and 19" feed height to 142" vertical lift with a 12" wide frame, to 60" overhead horizontal top run with 8" discharge funnel with a 142" discharge height. Control panel with push button start, E-stop and variable speed control.
OAD: 122"L x 31"W x 163"H
