Product
DCI Stainless, 4,000 Gallon, 304 stainless steel, single wall tank. Vessel Dimensions: 95¾" diameter x 148" deep with a 120" straight wall. Equipped with dome top, 3½"OD / 3"ID Tri-Clamp infeed, 4"OD vent, 18" diameter top bolt down manway / 16" x 20" side bolt down manway and 3½"OD / 3"ID Tri-clamp fitting discharge with 18" ground clearance.
Top Access:
(1) 2"OD / 1½"ID Tri-clamp
(1) 2½"OD / 2"ID Tri-Clamp
OAD: 115"L x 115"W x 172"H
Cascade Model 40G-SLI, free standing, single clamp, 180° hydraulic pallet inverter with number of loads per hour – depending on materials, application and operator dexterity. Load Capacity up to 4,000 lbs. Equipped with 48" Long x 48" Wide load table, 32" minimum to 66" maximum jaw opening size range,10 Hp power pack and push button control package. Mounted on heavy duty frame.
Loaded and relocated by forklift.
OAD: 56"L x 78"W x 96"H
Span Tech, model MultiSpan, two lane infeed conveyor. Equipped with a 9½" wide x 9½" long infeed spacing conveyor, 9¾" wide x 135" long table top conveyor section split into two lanes, (2) pneumatic stop gates and 9½" wide x 9½" long discharge conveyor.
OAD: 161"L x 34"W x 48"H
Bosch, Model PACK 102, 2-up, stainless steel, horizontal wrapper. Product size range: 3" to 9" in Length; 1/2" to 9-3/4" in Width; up to 3-3/4" in Height. Equipped with 72" long lugged product load area, pop out lugs, adjustable former, 2-up 10-1/2" wide by 3/4" thick serrated knife seal jaws, (2) sets of fin seal wheels (1- heated / 1- cold), film registration and safety guarding. Web specifications up to 26" in width; up to 15.7" in diameter; 3" core. Control panel has touch pad controller with upper and lower jaw temperature controllers with start, stop and e-stop push buttons. Mounted on stainless steel frame with casters and height adjustable leveling legs. Speeds dependent on materials, application and machine configuration.
OAD: 183" L x 52" W x 76" H
Pfm, Model Pearl, 2-up, automatic, 3 axis, servo driven, horizontal wrapper rated from 30 to 150 products per minute – depending on materials, application and machine configuration. Product size range: 1.6" to 18" in Length; 3/8" to 8.5" in Width; up to 3.9" in Height. Equipped with 80" long operator load area, lugged chain infeed, adjustable former, 2-up, 8.6" wide x 1" thick serrated seal jaws and fin seal assembly wheels with Interlock safety guarding and 42" long x 8" wide neophreme product discharge conveyor. Film spec’s up to 24" reel width; 14" OD reel, on 3" OD core. Control panel has PLC controls and touch pad controller with start, stop and e-stop push buttons. Mounted on base frame with (6) leveling legs.
OAD: 195"L x 40" W x 70" H
Combi America, Model Ergopack, case packing system. Rated from 5 to 10 cases per minute – depending on materials, application, machine configuration and operator dexterity. Case size range: 13" to 24" in Length; 7¾" to 16" in Width; 6" to 16" in Height. Equipped with 48" long blank case magazine, (4) suction cup reciprocating pick and place, case bottom minor and major flap closers, mechanical pusher bar, 12" wide x 192" long Intralox product conveyor with a 37" in feed height running parallel to 12" wide x 118" long rubber belt case conveyor and is hand crank adjustable. Control panel with (2) hand cycle control and push button operation controls. Mounted on base frame with leveling legs.
OAD: 305"L x 110"W x 80"H Case Erector / Packer
Pfm, Model Pearl, 2-up, automatic, 3 axis, servo driven, horizontal wrapper rated from 30 to 150 products per minute – depending on materials, application and machine configuration. Product size range: 1.6" to 18" in Length; 3/8" to 8.5" in Width; up to 3.9" in Height. Equipped with 80" long operator load area, lugged chain infeed, adjustable former, 2-up, 8.6" wide x 1" thick serrated seal jaws and fin seal assembly wheels with Interlock safety guarding and 42" long x 8" wide neophreme product discharge conveyor. Film spec’s up to 24" reel width; 14" OD reel, on 3" OD core. Control panel has PLC controls and touch pad controller with start, stop and e-stop push buttons. Mounted on base frame with (6) leveling legs.
OAD: 195"L x 42" W x 80" H
Cozzoli, model RM110, automatic inline intermittent motion stainless steel monoblock, fill, plug and screw cap system. Rated up to 110 containers per minute – depending on materials, application and machine configuration. Fill range up to 120ml single dose and 360ml on multiple doses with proper change parts. Capable of handling straight sided, rounds, oval and rectangle containers. Maximum container diameter of 2¼”. Plug size range of: (5/16)” to 1(1/8)”. Cap size range of: 5/16″ to 1¼”. Equipped with 3¼” wide x 141″ long container conveyor, worm screw to star wheel container indexing, (4) head piston filler, 21″ diameter plug sorting bowl, 8 head 2-up plugger, 21″ diameter cap sorting bowl, 8 head 2-up capper and 2 head torque station. Control panel with AB controller and touch screen HMI.
OAD: 151″L x 86″W x 76″H
Columbia Model FL100, Low level, full case palletizer rated from 5 to 12 cases per minute and number of pallets per hour – depending on materials and application. Case size range: up to 22" in Length; 16" in Width; 18" in Height. Pallet load capacity: up to 48" in Length; 48" in Width; and 65" in Height with skid and Weight capacity: up to 600 lbs per tier and 3000 lbs per load. Equipped with 12 capacity empty pallet magazine that accommodates pallets from 40" x 40" to 48" x 48", with powered roller case in feed conveyor, orientation and layer former, pallet loading section with pusher bar and discharge conveyor. Control panel has A/B PLC and safety guarding.
Slip Sheet Feeder Available At Additional Cost
OAD: 188" L x 192" W x 120" H Palletizer
80" L x 58" W x 84" H Pallet Magazine
Jones, Model IMV5, Semi-automatic, intermittent motion, vertical tuck cartoner. Carton size range: 1″ to 4-1/4″ in Length; 3/4″ to 4-1/4″ in Width; 2-1/2″ to 8″ in Depth. Equipped with (2) chains set on 5″ centers, with 1-1/2″ lugs, 40″ loading area, carton magazine, reciprocating pick-n-place, operator hand load area each side, major and minor flap closers and tuckers, right angle carton discharge and interlocked guarding. Controls feature AB PLC and touch screen. Speed dependent on materials, application, and machine configuration.
OAD: 135″ L x 60″ W x 65″ H
Pfm, Model Falcon, 2-up, automatic, servo driven, horizontal flow wrapper with number of product – dependent on materials, application, machine configuration and operator dexterity. Product size range: 1.6" to 18" in Length; 3/8" to 9" in Width; up to 3.5" in Height standard. Equipped with 96" product load area with 1½" high quick change lugs and 96" long load area, no product / no pouch, adjustable forming box, 2-up, 9.8" wide x 1" thick seal jaws and (3) sets of fin seal wheels, interlock safety guarding and 36" long powered discharge conveyor. Film specifications up to 23.6" reel width; up to 13.7" reel OD; on 3" OD core. Has (2) film rolls (1) for extra film roll no splice station. Control panel has PLC controls with touch screen HMI. Mounted on base frame with leveling legs.
OAD: 230"L x 60"W x 90"H
Feldmeier, 1000 gallon capacity, stainless steel jacketed and insulated process tank. 316L stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 72" diameter with 60" straight wall. Equipped with dome top, 18" OD flip top man way, top mounted 7½ Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom ball valve discharge with 18" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 11776
MAWP: 150 PSI @ 350°F
MDMT: -20°F @ 150 PSI
Top Ports:
(2) 3½"OD / 3"ID Tri-Clamp
Jacket Ports:
(4) 1½" NPT
OAD: 82" L x 78" W x 133" H