Adco, Model 15DBC105-SS, Automatic, horizontal, continuous motion, stainless steel, hot melt glue cartoner. Rated from 25 to 120 cartons per minute – depending on materials and application. Carton size range: 1" to 9½" in Length; ¾" to 4" in Width, 4½" to 12" in Depth. Equipped with adjustable bucket product in feed conveyor with 120" long load area, 45" long automatic blank carton magazine, (2) head rotary pic-n-place with pre-break and has (4) chains adjustable set on 12" centers with 3½" high lugs, top carton squaring device, barrel cam product loader, Nordson Problue hot melt glue system, major and minor flap closers, Seko adjustment gauges, statis light bar and 28" long dual side belt discharge conveyor. Control panel has A/B PLC controller with A/B Panelview touch screen HMI and e-stops. Mounted on stainless steel frame with interlock safety guarding and leveling legs.
OAD: 387"L x 93"W x 74"H
CVP Model Mark lll, Semi automatic, vacuum / gas flush, configured for M.A.P. (modified atmosphere package) bag sealer with number of bags per minute – depending on materials, application and operator dexterity. All seal head components are constructed of T-303 / 304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system (26" usable seal area) and Cool-Edge seal bar with Teflon® tape, dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on stainless steel frame with casters.
OAD: 41" L x 40" W x 60" H
Langen, Model B1, Semi automatic, continous motion, horizontal, hot melt glue cartoner. Rated from 40 to 120 cartons per minute – depending on materials, application and operator dexterity. Equipped with (4) chains adjustable set on 18" centers, with 2" long x 3" high lugs. Carton size range: 1¾" to 15¾" in Length; ½" to 6" in Width; 3¾" to 14" in Depth. Equipped with 96" long powered blank carton magazine, 2 head rotary vacuum pic n place, top squaring system, 72" long product hand load area, major flap plows, minor flap closers, Nordsen hot melt glue system and vacuum system. Control panel with start / stop, jog / run, glue on / off and vacuum pump on / off. Mounted on base frame with lexan guarding and height adjustable legs with casters.
OAD: 225"L x 62"W x 72"H
Flexicon, Model 1450, Rated up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with 30” long x 30” wide x 24” deep stainless steel agitated product hopper and cover with ½ Hp agitator drive, and mounted on (4) legs, with 3" OD x 151" long stainless steel product conveying screw, 4" OD x 120" long flexible poly tube and has top mounted 3 Hp motor drive with 6” ID product discharge port Control panel has start, stop, e-stop controls. Mounted on stainless steel Model PB1-S-X Portable base with support mast and has (2) 6" swivel casters with brake under hopper and (2) 6" rigid casters with extended length base and Tilt-Down support mast with manually actuated hydraulic jack.
OAD: 152" L x 46" W x 132" H
Combi America, Model 2EZHS, Ergopack. Rated from 5 to 20 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 24" in Length; 6" to 16" in Width; 5" to 18" in Height. Equipped with 48" long blank case magazine, suction cup reciprocating pick and place, minor and major flap closers, mech pusher bar, 2" tape head, 12" wide x 192" long product conveyor with 80" long bi-directional accumulation and packing station running parallel to 12" wide x 94" long case conveyor. Top case taper equipped with minor flap closer, major flap plows, 3" wide dual side gripper belts, 2" top / bottom tape heads, hand crank adjustable with Siko gages and interlocking Lexan safety guarding.
OAD: 283"L x 116"W x 70"H
Combi America, Model 2EZHS, Ergopack. case erector and packer rated from 5 to 20 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 24" in Length; 6" to 16" in Width; 5" to 18" in Height. Equipped with 48" long blank case magazine, suction cup reciprocating pick and place, mech pusher bar, with 2" tape head, 12" wide x 192" long product conveyor has a 80" long bi-directional accumulation and packing station running parallel to 12" wide x 94" long case conveyor. Equipped with minor flap closer, major flap plows, 3" wide dual side gripper belts, 2" top / bottom tape heads, hand crank adjustable with Siko gages and interlocking Lexan safety guarding.
OAD: 283"L x 116"W x 70"H
Adco, Model 15DBC105-SS, Automatic, horizontal, continuous motion, stainless steel, hot melt glue cartoner. Rated from 25 to 120 cartons per minute – depending on materials and application. Carton size range: 1" to 9½" in Length; ¾" to 4" in Width, 4½" to 12" in Depth. Equipped with adjustable bucket product in feed conveyor with 117" long load area, 46" long automatic blank carton magazine, (2) head rotary pic-n-place with pre-break and has (4) chains adjustable set on 12" centers with 3½" high lugs, top carton squaring device, barrel cam product loader, Nordson Problue hot melt glue system, major and minor flap closers, Siko adjustment gauges, statis light bar and 28" long dual side belt discharge conveyor. Control panel has A/B PLC controller with A/B Panelview touch screen HMI and e-stops. Mounted on stainless steel frame with interlock safety guarding and leveling legs.
OAD: 384"L x 93"W x 73"H
Arpac, Model BPTW-6000, Automatic, inline, continuous motion, registered film, shrink bundler and tunnel. Rated up to 60 bundles per minute – depending on materials and application. Product size range: 5" to 12" in Length; 5" to 20" in Width; 3" to 12 in Height. Film specs: to 26" in Width; to 20" in Diameter; on 3" core; can handle clear or printed film of 1.75 to 2.5 mil low density polyethylene and has maximum film cut-off length of 42". Equipped with dual side mounted film racks, splicing bar, infeed spacing conveyor, film registration, 28" seal bar and bottom overlap seal, (3) zone shrink tunnel with adjustable flow vents, variable speed blowers and cooling fans on discharge. Control panel has A/B controller with touch screen HMI and statis light bar. Mounted on heavy duty formed and structural steel frame with safety guarding.
OAD: 394"L x 104"W x 115"H
Custom Cut Metal, stainless steel frame conveyor. Equipped with a 24" wide x 180" long belt with a 34" to 38" infeed / discharge range. Powered by a ¾ hp drive with variable speed control.
OAD: 180" L x 37" W x 35" H
Loma, Model IQ4, Automatic, inline, stainless steel conveyor through metal detector with number of product per minute – depending on materials and application. Equipped with 4" in Height; 12" in Width usable aperture, 70" Long x 12" Wide Intralox belt conveyor, with air blast reject 29" infeed and discharge height. Sensitivities: depending on product, container and environment being run in. Control panel has touch screen HMI and status light. Mounted on (4) leg base frame with casters.
OAD: 72" L x 36" W x 42" H
Greerco, Model W750H, horizontal high shear colloid mill. Rated from 30 to 120 GPM – depending on materials, application and machine configuration. Equipped with a 2½"OD / 2"ID Tri-clamp inlet with 9" ground clearance, jacketed stator housing, hand wheel adjustable rotor-stator gap and 2½" OD / 2"ID Tri-Clamp discharge with 10½" ground clearance. Rotor powered by a 20 HP drive. Control panel with start / stop switch.
MAWP: 45 PSI Mill Inlet Pressure
MAWP: 90 PSI Jacket
OAD: 45"L x 18"W x 41"H
Patterson Kelly, 8 qt, 304 stainless steel jacketed, vacuum twin shell mixer. Rated to 140 lbs. per ft³ and Ibs. per hour – depending on materials, application and machine configuration. Equipped with (2) 7" ID product ports with bolt down covers, (2) 13" long side V-Walls and (2) 6" long inner V-Walls. 3"ID discharge with 12½" table clearance, liquid solids bar with a 3/8" tubing connection powered by a ½ HP drive, shell powered by ½ Hp drive, 6 kw self-contained heater for jacket with ½ hp circulating pump and 1 hp vacuum pump with solvent recovery. Requires 61" ceiling clearance with 13" swing radius / 26" swing diameter. Control panel with push button start / stop for blender, intensifier, circulation pump and vacuum pump. Dial controls for temperature, blend speed and intensifier speed. On / off switch for heater. Mounted on a stainless steel base frame with casters
Nat’l Brd: 63548
MAWP: Full Vac @ 212°F (Shell)
MDMT: 20°F @ Full Vac (Shell)
MAWP: 30 PSI @ 212°F (Jacket)
MDMT: 20°F @ 30 PSI
OAD: 74"L x 34"W x 57"H
